Anzzi Enti L-AZ096 Series User manual

v2.1 – This version supersedes all previous versions as of 02/25/2022
Item:L-AZ096**
INSTALL & OPERATION MANUAL
V2.1
ANZZI Single-Handle Lavatory Faucet
DON’T WAIT!
REGISTER NOW!
Register your product within 90 days to ensure your product is
recognized as an purchase and is for warranty
coverage.
in the registry card (Pg. 2) or register
at www.swcorp.com/register
.
LEAD FREE
NSF/ANSI/CAN 61

Have questions? Call us at 305-614-4070 or visit us at www.ANZZI.com

DESCRIPTION
• Stainless Steel construction
• Flexible supply lines suitable for 3/8“ supply stop
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, Φ1-5/16” (Φ33mm) MIN.
FLOW
• Water usage is limited to these maximum flow rates
as indicated by the corresponding product markings
1.2 gpm max (4.5L/min) at 60psi
CARTRIDGE
• Ceramic disk cartridge
Note: Dimensions are for reference only. Detailed
information is in accordance with the final product.
7,87"
[200mm]
9,65"
[245mm]
6,36"
[161,5mm]
11,65"
[295,8mm]
1,97"
[50mm]
1,57"
MAX [40mm]

2
1. Remove the rubber washer,metal
washer and lock nut from the faucet.
2. Install faucet with oring under the flange
through center hole.
4. Hand tighten further using a screw driver
to tighten lock nut screws.
5.Connect hoses to the water supply and
tighten.Check all connections at arrows for
leaks.Retighten if necessary,but do not
overtighten.
6. Remove the aerator and turn on faucet for
1-minute to flush debris from faucet and
feed lines.Turn faucet off and re-install
aerator.
3. Re-install the rubber washer followed by
the metal washer and lock nut,then hand
tighten it.
Single-Handle Lavatory Faucet Installation
INSTALLATION MANUAL Tools You Will Need：
Adjustable wrench Hexagon wrench Philips Screwdriver
Notes before installation :
Maintenance
Please check that all components
are present.
1.
Use a soft cloth and vinegar to
remove hard-water spots.
1.
Check aerator(if present) regularly for
calcium build up are when water
stream is not optimum.
2.
DO NOT use caustic cleaning
products as the use will break down
finish and will void the product
warranty.
3.
Acceptable cleaners include vinegar
or mild non-abrasive liquid detergents.
4.
Before installation ensure that all
feed lines are clear of debris and
on/off valve is present.
2.
Ensure water pressure is between
20-125 PSI (includes combination of
hot and cold feed lines).
3.
Pictures in the manual are general in
content and may not represent
exactly your purchased faucet.If you
are having difficulties please contact
a professional plumber.
4.
If you will be away from home for an
extended period you should shut off
the main water supply.
5.