Anzzi SB-AZ009WC User manual

SHOWER BASE INSTALLATION
& CARE GUIDE
If you have any questions please don’t hesitate to call us at 1-844-44-ANZZI or visit us online at www.ANZZI.com
FOR MODELS
SB-AZ005WN • SB-AZ005WO • SB-AZ006WN • SB-AZ007WL • SB-AZ007WR • SB-AZ007WC • SB-AZ008WL • SB-AZ008WR • SB-AZ009WC •
SB-AZ009WD • SB-AZ009WH • SB-AZ010WN • SB-AZ011WC • SB-AZ011WO • SB-AZ012WL • SB-AZ012WR • SB-AZ013WL • SB-AZ014WC • SB-AZ015WV •

SPECIFICATION
Model Dimensions D (in) W (in) D1 (in) W1 (in)
SB-AZ008WR 60”x36” 36” 60” 18’' 12”
SB-AZ012WR 60”x36” 36” 60” 18” 4.72”
SB-AZ008WL 60”x36” 36” 60” 18” 12”
SB-AZ012WL 60”x36” 36” 60” 18” 4.72”
SB-AZ013WL 60”x32” 32” 60” 16” 4.72”
SB-AZ007WL 60”x36” 36” 60” 18” 12”
SB-AZ007WR 60”x36” 36” 60” 18” 12”
SB-AZ007WC 60”x36” 36” 60” 18” 30”
Model Dimensions W (in) C (in)
SB-AZ005WN 36”x36” 36” 12.2”
SB-AZ006WN 38”x38” 38” 12”
SB-AZ005WO 36”x36” 36” 12.2”
2
DOUBLE THRESHOLD SHOWER BASE
QUARTER ROUND SHOWER BASE
W1
D
D1
W
W
W
C
C

SPECIFICATION
SQUARE SHOWER BASE
Model Dimensions W (in) C (in)
SB-AZ009WC 36”x36” 36” 18”
SB-AZ010WN 38”x38” 38” 19”
SB-AZ009WD 36”x36” 36” 12”
SB-AZ009WH 36”x36” 36” 18”
3
W
W
C
C
Model Dimensions D (in) W (in) D1 (in) W1 (in)
SB-AZ011WC 48”x36” 36” 48” 18’' 24”
SB-AZ014WC 60”x36” 36” 60” 4.05” 30”
SB-AZ015WV 48”x32” 32” 48” 15.87” 9.06”
SB-AZ011WO 36” 48” 18” 24”
SINGLE THRESHOLD SHOWER BASE
W
W1
D
D1
48”x36”

INSTALLATION
01
2” pvc pipe should extend up and out of the hole. Make sure the
pipe and hole align with the product’s drain location.
Refer to the spec drawings to make sure.
See Fig. 1
4
LeftHand
RightHand
Alcove RightHand
Alcove LeftHand
Alcove enter C


Install the shower drain. NOTE: The shower drain is
NOT INLCUDED with this package.
See Fig. 3
Drainnut
Drainbody
INSTALLATION
02
03
Position the base and make sure the draining pipe location
matches the actual location of the shower base drain.
See Fig. 2
5
Base
WoodFloor
Drain

INSTALLATION
6
04
05
Position the shower base over so the waste drain and the
drainage pipe are aligned. The shower base should butt up
against the drywall.
Lower the base over the drain and set against the studs.
See Fig. 4
LeftHand
RightHand
Alcove
LeftHand
Alcove
RightHand
Mix your bedding material (i.e. mortar or cement-sand). It is NOT
RECOMMENDED to use concrete or plaster. Apply enough
bedding to support the complete bottom of the base. This will
make sure the base will not shift positions as well as provide
additional stability.
See Fig. 5

INSTALLATION
7
06
07
Place the base against the drywall, position the shower base over
so the waste drain and the drainage pipe are aligned, and use a
leveler to make sure the shower base is level.
See Fig. 6
position.
See Fig. 7
24 Hours
Wait 24 hours before
using the shower

INSTALLATION
08
09
Refer to the drawing below to ensure your installation matches
the illustrated layers.
See Fig. 8
See Fig. 9
8
24 Hours
Wait 24 hours before
using the shower