Anzzi KF-AZ031 User manual

The tools might be applied to the following places:
6
78
9
10
11
14
13
12
15
20
21
16
17
18
4
5
1
2
3
19
22
23
24
25 26
27
2
PART NAMENO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Threaded sleeve
Plastic base
Shower
Spout
Handle
Body
Cartridge locknut
Trim cap
Gasket assembly
Lock nut
Shower hose
Shower sleeve
Connector
Ring
Cartridge
Base
Screw
Index
Copper tube
Quick connect
O-ring
Screw
Weight
Allen key
Holding ring
Ring
O-ring
ASME A112.18.1/CSA B125.1
SINGLE HANDLE PULL-DOWN
KITCHEN FAUCET
Screwdriver Channel Locks
Adjustable Wrench
RECOMMENDED TOOLS
Attention:
for easy installation, you will need:
1.To read all the installation instruction completely before
beginning.
2.To read all the warning, attention and maitenance
information.
Allen key
WARNING:
Please keep the
tool for future
use!
Goggles
Teflon tape
KF-AZ031
Step 4 Parts list
INSTALLATION MANUAL
1-844-44-ANZZI or visit www.ANZZI.com
Per fection is our Tradition
MT

Step 2 Checking and testing
Step 1 Faucet installation
3
2 2
2.Check all connections at arrows for leaks, re-tighten it if necessary.
BUT DON'T OVERTIGHTEN
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
1 1
1.
water lines for one minute. Reinstall shower by hand.
Remove the shower by hand. Turn the faucet handle all the way on, turn on hot and cold water supply and flush
A. B. C.
3.Connect to water supply lines with either:
(A)3/8” O.D. Copper tubing (ball nose risers with the coupling nuts) or;
(B)3/8” Copper tubing (no ball) with supplied tube head interior connector or;
(C)IPS faucet connectors(1/2 ”).
1.Position the faucet in order on the counter top as shown. Don't forget the O-ring. Assemble gasket assembly and
lock nut to faucet threaded sleeve by hand and tighten the screws with screwdriver.
2.Connect the shower hose to quick connect.CAUTION: MAKE SURE THE HOSE IS PROPERLY ENGAGED AND
SECURED IN THE QUICK CONNECT. Dis-assemble the weight and put it on the shower hose. Then fix screws by
screw driver.