Anzzi Perfection is our Tradition SH-AZ032 User manual

The tools might be applied to the following places:
PART NAMENO.
ASME A112.18.1/CSA B125.1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
2
3
4
5678
10
11
12
13
9
14
15
16
17
18
19
20
21
22
Shower arm
Flange
Shower head
Sleeve
Cartridge
Cartridge locknut
Trim cap
Body
Check valve
Joint
Joint
Index
Allen key
O-ring
Screw
Handle
Ttrim plate
Protect cover
Screw
Screw
Screw
SINGLE HANDLE PRESSURE
BALANCED TUB & SHOWER SET
Spout
Screwdriver Channel Locks
Adjustable Wrench
RECOMMENDED TOOLS
Attention:
for easy installation, you will need:
1.To read all the installation instruction completely before
beginning.
2.To read all the warning, attention and maitenance
information.
Allen key
WARNING:
Please keep the
tool for future
use!
Goggles
Teflon tape
SH-AZ032
Step 4 Parts list
INSTALLATION MANUAL
1-844-44-ANZZI or visit www.ANZZI.com
Per fection is our Tradition
MT

Step 2 Checking and testing
Step 1 Faucet installation
3
2
Check all connections at arrows for leaks, re-tighten it if necessary.
BUT DON'T OVERTIGHTEN
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
1 1
4
1.Remove the protect cover #5a and take out the screw #4 with the screwdriver, then remove the protect cover #5b.
2.Connect pipes with faucet as photo, pay attention to the connection of hot and cold water supply pipe.
3.Let the water run for one minute. Check all connections for leakage.
4.Apply teflon tap to the shower arm, put flange and connect it to water supply pipe, after fixing the shower arm,
screw the shower head to the shower arm. ATTENTION: don't forget the o-ring between the shower arm
and the shower head. Put the trim plate, fix it with screw, tighten it with screw driver, and fix the handle with
screw, finally put the index. Then assemble the outlet spout, loose the screw and connect the spout to the water
supply pipe then tighten the screw again with allen key.
O-ring
5b
5a
4