1
For your Safety
Warning
To prevent electric shock or other injury, please do not disassemble or
repackage this product.
To prevent a fire, electric shock, or device malfunction, please do not use this
product in a wet environment such as a bathroom.
During operation, do not expose the product in areas above 55°C (131°F) or
below 5°C(41°F).
Avoid placing the product near a source of heat or in an area with strong
magnetic fields or excessive vibration, or exposing it to sunlight (even through
windows).
Never insert any metallic subject into the device to avoid any risk of electrical
shock, fire, short-circuiting or danagerous emission.
This product is an electronic device; please avoid dropping it or subjecting it to
other severe shock.
Do not place heavy objects on the top of the product or use excessive force on
it.
Avoid squeezing the product to prevent damage of the internal HDD.
Notice
Carefully unpack the contents of the product package.
Apacer doesn’t take any responsibility for data loss or damage during operation.
For some old computers, the power supplied by the USB port is less than the
repuired 5V DC. In this instance, please connect the spare USB type A connector
of the USB Y-cable or power sharing cable to a second USB port on the PC/NB,
or use the 5V power adapter. This will provide the necessary additional power
to run the drive.
Do not disconnect the product while formatting, uploading or downloading,
otherwise it may cause a program error
When transferring files, do not turn the power off or restart this device. No
responsibility is provided for any damage to or loss of any program, data, or
other information stored on any media or any part of this device serviced
hereunder.