Aplex ADP-1120 User manual

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 1
ADP-1120/ADP-1150/ADP-1170/ADP-1190
Display Monitor User Manual
ReleaseDate Revision
April 2005 V0.1
May 2007 V0.2
Aug. 2007 V0.3
®2005 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan
Tel: [phone] Fax: [phone] E-mail: [email protected] URL: www.aplex.com.tw

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 2
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
Used in accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a ClassAcomputing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
Operated in a commercial environment. Operation of this equipment in a residential area is likely
To cause interference in which case the user at his own expense will be required to take whatever
Measures may be required to correct the interference
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex Technology
Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
Electric Shock Hazard – Do not operate the workstation with its back cover removed. There are
dangerous high voltages inside.

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 3
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Chapter1 GettingStarted
1.1 Features………………………………………………………….…..…..…4
1.2 Specifications…………………………………………....……………...….4
1.3 Dimensions…………………………………...………………………….…6
1.4 Brief Description...................................................................................10
1.5 Display Mode………………………………………………………………11
Chapter2 OSD
2.1 Front Panel Controls………….………………………………….…..……12
2.2 OSD Controls………………………………………………………………12
2.3 Main Menu…..……………………………………………………………..13
2.4 AD Board (TB-6020) OSD Functions……………………………………15
Figures
Figure 1.1: Dimensions of ADP-1120….……………………………………..6
Figure 1.2: Dimensions of ADP-1150….……………………………………..7
Figure 1.3: Dimensions of ADP-1170…..…………………………………….8
Figure 1.4: Dimensions of ADP-1190…..…………………………………….8
Figure 1.5: Overall View……………………………………………………….10
Figure 1.6: Rear View…………………..……………………………………...10
Appendix
Panelmounting…..…………………………………………………………….16
Rackmounting…..……………………………………………………………..16

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 4
Chapter 1_____________________________
1.1 Features
1.2 Specifications
Display
ADP-1120 ADP-1150 ADP-1170 ADP-1190
Display 12.1” TFT SVGA LCD 15” TFT XGA LCD 17” TFT SXGA LCD 19” TFT SXGA LCD
Luminance 300 cd/m²400 cd/m²300 cd/m²250 cd/m²
Front panel NEMA4/IP 65 rating
Wall-mount screw holes
Resistive touch screen (optional)
Optional DVI, Video or S-Video input∘
Supports wide-ranging resolutions from 640x480 to up to 1600 x 1200
with auto phase and auto position.
ADP-1120 ADP-1150 ADP-1170 ADP-1190
Display 12.1” 15” 17” 19”
Luminance 300 cd/m²400 cd/m²300 cd/m²250 cd/m²
Viewing Angle 120(H)x95(V) 140(H)x125(V) 140(H)x130(V) 140(H)x130(V)
Resolution 800x600,
16.2M colors 1024x768, 16.2M colors 1280x1024, 16.2M colors 1280x1024, 16.2M colors
Backlight CCFL tube x 2,
50,000hrs
(1/2 brightness)
CCFL tube x 4
50,000hrs
(1/2 brightness)
CCFL tube x 4
50,000hrs
(1/2 brightness)
CCFL tube x 4
50,000hrs
(1/2 brightness)
Touch Screen Resistive
antiglare Resistive antiglare Resistive antiglare Resistive antiglare
OSD
Controls/Indicators
Automatic screen, setup (OSD), brightness, contrast, horizontal/vertical position, image
lock, color balance, video information, power on and sync detected
OS Compatibility Win 95/98, XP, 2000, NT 4.0, QNX, Linux
Internal Power
Adapter Input: 100~240 ±10% VAC, auto ranging, output: +12VDC@5A

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 5
Environment Operating Temperature: 0~50°C (32°~122°F)
Storage Temperature: -20~60°C (-4°~140°F)
Relative Humidity: 10~90% @40°C non-condensing, without touch screen
Vibration: 1g peak, 5~500Hz (at random)
Shock: 15G peak acceleration (11msec. duration)/operation
Ratings: NEMA 4/12, IP65
Certifications: CE/FCC Class A
Mechanical
ADP-1120 ADP-1150 ADP-1170 ADP-1190
Construction Steel chassis and
front panel
Steel chassis and
front panel
Steel chassis and
front panel
Steel chassis and
front panel
Dimensions 390x63x265
(Wx Dx H / mm) 410x69x310mm (Wx Dx H / mm) 457x75x355 (Wx Dx H / mm) 484x71.7x400 (Wx Dx H / mm)
Dimensions
Cutout 372(W)x246mm(H) 392(W)x292mm(H) 422(W)x331mm(H) 448(W)x360mm(H)
Weight
Mounting
Options Panel mount, rack mount (optional) Panel mount, rack mount (optional) Panel mount, rack mount (optional) Panel mount, rack mount (optional)
Ordering Information
ADP-1120 12.1” industrial display monitor (steel bezel)
ADP-1120T 12.1” industrial display monitor (steel bezel) with resistive touch screen
ADP-1150 15” industrial display monitor (steel bezel),
ADP-1150T 15” industrial display monitor (steel bezel) with resistive touch screen
ADP-1170 17” industrial display monitor (steel bezel)
ADP-1170T 17” industrial display monitor (steel bezel) with resistive touch screen
ADP-1190 19” industrial display monitor (steel bezel)
ADP-1190T 19” industrial display monitor (steel bezel) with resistive touch screen

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 6
1.3 Dimensions
Figure 1.1: Dimensions of the ADP-1120

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 7
Figure 1.2: Dimensions of the ADP-1150

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 8
Figure 1.3: Dimensions of the ADP-1170

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 9
Figure 1.4: Dimensions of the ADP-1190

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 10
1.4 Brief Description of the
ADP-1120, ADP-1150, ADP-1170 & 1190
The ADP-1120, the ADP-1150, the ADP-1170 and the ADP-1190 feature an excellent viewing ability
for monitoring and control applications. It is available with resistive touch screen that is easy to use
and maintain.
The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is
panel-mounted in a NEMArated cabinet or enclosure.
Figure 1.4: Overall View of
ADP-1120 (12.1”), ADP-1150 (15”), ADP-1170 (17”) & ADP-1190(19”)
Figure 1.5: Rear View of
ADP-1120 (12.1”), ADP-1150 (15”) & ADP-1170 (17”), & ADP-1190(19”)

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 11
1.5 Display Mode
Display Mode Hori. Sync (KHz) Vert. Sync. (Hz)
31 60
VGA 640 x 480 38 72
38 75
35 56
SVGA 800 x 600 38 60
48 72
47 75
48 60
XGA 1024 x 768 56 70
60 75
1152 x 864 68 75
64 60
SXGA
1280 x 1024 80 75

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 12
Chapter 2_____________________________
2.1 Front Panel Controls
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( / or +/-) key.
4. Press (Menu) and then adjust the quality with the ( / or +/-) key.

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 13
2.3 Main Menu
In the Main menu, there are the following items:
zColor
zImage Setting
zPosition
zOSD Menu
zLanguage
zMisc
zExit
For Color, check out the following:
zContrast
zBrightness
zColor Adjust
zColor Temp
zBack
For Image setting, check out the following:
zClock
zPhase
zGamma
zSharpness
zBack

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 14
In the Position, there are the following:
zH. Position
zV. Position
zBack
In the OSD menu, there are:
zOSD H. Pos.
zOSD V. Pos.
zOSD Timer
zBack
In the Language menu, there are:
zEnglish
zFrances
zGermany
zSpanish
zTraditional Chinese
zSimplified Chinese
zJapanese
In the Misc menu, there are:
zSignal Source
Select VGA: Analogue VGA Input
Select DVI: Digital DVI-D Input
Select AV: Composite Video Input
Select SV: S-Video Video Input
zReset
zBack

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 15
2.4 AD Board (TB-6020) OSD Functions
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the buttons until the AC power cord is connected and the “RGB” appears on the top left corner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 second. Under the
non-signal entry situation, if is seen, exit is thus successfully made.
When the Burn-in Mode is Unable to Eradicate…
1.) If the “RGB” is still on the top left corner of the screen, press to enter “Miscellaneous” and
choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power and
repeat the above steps.
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the buttons
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
3.) Functions of OSD Keys
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
Cable Not Connected

ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual 16
Appendix_____________________________
Panel Mounting
The ADP-1120/1150/1170/1190 display monitor is designed to be panel-mounted as shown in Figure A.
Just carefully place the unit through the hole and tighten the given 8 screws from the rear to secure
the mounting.
Figure A: Panelmounting of the ADP1120/1150/1170/1190
Rack Mounting (optional)
The ADP-1120/1150/1170/1190 display monitor can be rack-mounted as an option. Just carefully slide
it into the rack and tighten the given 8 screws from the front to secure the mounting as shown in Figure
B.
Figure B: Rackmounting of the ADP1120/1150/1170/1190