Aplex OPD-1086C User manual

OPD-1XX6A User Manual
1
OPD-1086C/1126A/1156A
Open Frame Design Industrial Display
User Manual
Release Date Revision
July. 2021 V1.0
®2021 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] URL: http://www.aplextec.com/zh/home.php

OPD-1XX6A User Manual
2
Revision History
Reversion
Date
Description
1.0
2021/07/21
Official Dimensions

OPD-1XX6A User Manual
3
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Electric Shock Hazard –Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.

OPD-1XX6A User Manual
4
Table of Contents__________________________
Revision History……………………………………………………………………………………………………….……..….2
Warning!………………………………………………………………………………………………………………….……..….3
Chapter 1 Getting Started
1.1Features…………………………………………………………………………………………….….………….5
1.2 Specifications………………………………………….……………………………………………..…...….5
1.3 Dimensions…………………………………...……………………………………………………..….…6
1.4 Brief Description.............................................................................................8
Chapter 2 OSD
2.1 AD Board OSD Functions….………..……….……………………………….…………………………...9
2.2 AD Board OSD Controls……………….…………………………………………………..………………10
2.3 Main Menu…..……………………………………………………………………….………………………..11
Chapter 3 Installation
3.1 Windows 7 Universal Driver Installation for PenMount 6000 Series…………………14
3.2 Software Functions…………………………………..…………………………………………...………..22
Appendix A: Board Dimensions
Specifications…………………………..…………………….……………………………….....38
Board Dimensions………………….……………………….…….……………………………39
Figures
Figure 1.1: Dimensions of OPD-1086C………………………………………..….....……………………………..……6
Figure 1.2: Dimensions of OPD-1126A…….………………………………………………………………………………7
Figure 1.3: Dimensions of OPD-1156A…….………………………………………………………………………………7
Figure 1.4: Overview of OPD-1xx6A……………………………………….…….…………………………………………8
Figure 1.5: Rear View of OPD-1xx6A……………………………………..…….…………………………………………8
Figure A: Dimensions of TB-6802(TOP)…………………………………………………….………………………..39
Figure B: Dimensions of TB-6802(BOTTOM)……………………………………………………………………..39

OPD-1XX6A User Manual
5
Chapter 1 Getting Started
1.1 Features
8”, 12.1”, 15”Open Frame Design Industrial Display
Metal Front Panel
OSD at rear side
VESA mount 75 x 75
Optional Resistive Touch Panel, RS-232 or USB interface
Default DC 9~36V input
VGA, DVI, HDMI, and DP input
1.2 Specifications
OPD-1086C
OPD-1126A
OPD-1156A
IO Port
VGA
1
DVI-D
1
DP
1
HDMI
1
USB
1 x USB for touch control
Audio
1 x Line-in phone jack
Power
1 x 3-pin 11~32 V DC terminal block connector
Others
1 x RS-232 DB-9 option for touch control
1 x AC inlet for option
OSD
OSD Control
Membrane
OSD on the rear side
LCD
Display Type
8”color TFT LCD
12.1”color TFT LCD
15”color TFT LCD
Resolution
800x600
800x600
1024x768
1024x768
Max. Colors
16.2M
16.2M
16.7M
16.2M
Luminance
(cd/m2)
400
450
500
300
Viewing Angle
(H/V)
140/120
178/178
178/178
176/176

OPD-1XX6A User Manual
6
Contrast Ratio
500: 1
1500: 1
1000:1
2000: 1
Backlight Lifetime
40,000 hrs
50,000 hrs
30,000 hrs
50,000 hrs
Power
Power Input
Default DC 9~36V input, optional AC 100~240V input
Power
Consumption
MAX: 5.2W
MAX: 13.1W
MAX: 13.2W
Mechanical
Construction
Steel chassis
Mounting
Panel mount / VESA Mount 75 x 75
Dimensions(mm)
208 x 148 x 42
300 x 250 x 38
357 x 291 x 56.2
Net Weight
1.3 kg
1.9 kg
3.7 kg
Environment Specifications
Operating
Temperature
0 ~ 50 °C (-20 ~ 60 °C for option)
Storage
Temperature
-30 ~ 70 °C
Storage Humidity
10 ~ 90% @40°C Non-condensing
Vibration
1G / 5 ~ 500Hz (Random) / Operation
Shock
15G peak acceleration(11 msec. duration) / Operation
Certificate
CE/FCC Class A

OPD-1XX6A User Manual
7
1.3 Dimensions
Figure 1.1: Dimensions of OPD-1086C

OPD-1XX6A User Manual
8
Figure 1.2: Dimensions of OPD-1126A
Figure 1.3: Dimensions of OPD-1156A

OPD-1XX6A User Manual
9
1.4 Brief Description of the OPD-11x6A
The OPD-11x6A offers 8”/12.1/15” LCD open frame display the feature an excellent viewing ability for special
monitoring and control applications, especially in Industrial area. It is available with resistive touch screen that
is easy to use and maintain.
Figure 1.4: Overall View of OPD-11x6A
Figure 1.5: Rear View of OPD-11x6A

OPD-1XX6A User Manual
10
Chapter 2 OSD
2.1 AD Board OSD Functions
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go) the
buttons until the AC power cord is connected and the “RGB” appears on the top left corner of your screen.
Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the button
(If not workable, press the button and don’t let them go) until the AC power cord is connected. Please
don’t let your fingers go until the AC power cord is connected again and the wording of “RGB” appears on the
top left corner of your screen, and wait for 3 second. Under the non-signal entry situation, if
is seen, exit is thus successfully made.
When the Burn-in Mode is Unable to Eradicate…
1.) If the “RGB” is still on the top left corner of the screen, press to enter “Miscellaneous” and choose
“Reset”, and then Yes, and press . When the screen goes black, disconnect power and repeat the
above steps.
Cable Not Connected

OPD-1XX6A User Manual
11
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the buttons (don’t let
them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When “RGB” appears, repeat
the above steps.
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item or adjust the numerals with the ( / or +/-) key.

OPD-1XX6A User Manual
12
2.3 Main Menu
In the PICTURE, there are the following items:
AutoBacklight
Backlight
Brightness:
Contrast
Sharpness
Exit
In the DISPLAY, there are the following items:
AutoAdjust
H Position
V Position
Disp Rotate
Exit
In the COLOR, there are the following items:
Panel Uniformity
Gamma
Temperature
Color Effect
Exit

OPD-1XX6A User Manual
13
In the INPUT, there are the following items:
A0:VGA
D1:DP
D3:HDMI
Exit
In the AUDIO, there are the following items:
Volume
Mute
Audio Source
Exit
In the OTHER, there are the following items:
Reset
Menu Time
OSD H Position
OSD V Position
Language
Transparency
Rotate
Exit

OPD-1XX6A User Manual
14
Information part.

OPD-1XX6A User Manual
15
Chapter 3 Installation
This chapter describes how to install drivers and other software that will allow your touch screen work with
different operating systems.
3.1 Windows 7 Universal Driver Installation for PenMount 6000 Series
Before installing the Windows 7 driver software, you must have the Windows 7 system installed and running
on your computer. You must also have one of the following PenMount 6000 series controller or control
boards installed: PM6500, PM6300.
3.1.1 Installing Software(Resistive Touch)
If you have an older version of the PenMount Windows 7 driver installed in your system, please remove it first.
Follow the steps below to install the PenMount DMC6000 Windows 7 driver.
Step 1. Click Next to continue.
Step 2. Read the license agreement. Click I Agree to agree the license agreement.

OPD-1XX6A User Manual
16
Step 3. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the
installation.
Step 4. Click Yes to continue.

OPD-1XX6A User Manual
17
Step 5. Click Finish to complete installation.

OPD-1XX6A User Manual
18
3.1.2 Installing Software (Projected Capacitive)
Step 1. Click Next to continue.
Step 2. Select I accept the terms of the license agreement. Click Next.

OPD-1XX6A User Manual
19
Step.3. Click Next to continue.
Step 4. Click Install RS232 interface driver.

OPD-1XX6A User Manual
20
Step 5. Select None. Click Next.
Step 6. Click OK.
Step 7. Click Support Muti-Monitor System. Click Next.