Aplex VIPAC-8 Series User manual

VIPAC-8XX Series User Manual 0
VIPAC-8XX
Intel Celeron N2930 Expandable Fanless PANEL PC
User Manual
Release Date Revision
Jul.2018 V1.2
®2018 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] URL: http://www.aplextec.com/zh/home.php

VIPAC-8XX Series User Manual 1
Revision History
Reversion
Date
Description
1.0
2017/09/22
Official Version
1.1
2018/01/25
Modify PCIe information.
Renew product images.
1.2
2018/07/30
Modify motherboard chapter:
PCIE_1X information

VIPAC-8XX Series User Manual 2
Warning!___________________________
Disclaimer
This information in this document is subject to change without notice. In no event
shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this document
or in any related materials.
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference.

VIPAC-8XX Series User Manual 3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not in
use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.

VIPAC-8XX Series User Manual 4
Table of Contents
Revision History…….……………..………………………………………………..……………………………….1
Warning!/Disclaimer………............................……………………………….……………….……..….2
Packing List/Safety Precautions…......……………..……………………………..………………………..3
Chapter 1 Getting Started
1.1 Features………………………………….………..……………………………………6
1.2 Specifications……………………………….………….………………………………6
1.3 Dimensions……………………………………………..……………………………….9
1.4 Brief Description of VIPAC-8XX Series………………………..…………11
1.5 Intallation of HDD……………………………….……………………..…………12
1.6 Intallation of PCIe card…………………………….………………..…………13
1.7 Intallation of mSATA SSD……………………………………………..…………14
Chapter 2 Motherboard
2.1 Motherboard Specifications…...……………..……………………….…..…15
2.2 Motherboard Layout…………….…………….………………………..……....17
2.3 Jumpers and Connectors Location………………….………………………18
2.4 Jumpers Setting and Connectors…………………………………………..20
Chapter 3 BIOS Setup
3.1 Operations after POST Screen………………...................................34
3.2 BIOS setup utility…………………………….........................................34
3.3 Main Setting…………….................................................................35
3.4 Advanced Settings………………….…………………...............................36
3.5 Chipset Settings..........................................................................48
3.6 Security Settings.........................................................................53
3.7 Boot Settings…………………………………………………………………..……54
3.8 Save & Exit Settings……..............................................................55
Chapter 4 Installation of Drivers
4.1 Intel(R) AtomTM SoC Chipset………………….…………………………….58
4.2 Intel(R) VGA Chipset…………………………….………………....…………..…61
4.3 Realtek ALC662 HD Audio Driver Installation………..………………65
4.4 Intel_TXE(Win) Driver………………………………..………………….………67
Chapter 5 Touch Screen Installation
5.1 Windows 8.1/10 Universal Driver Installation for PenMount 6000
Series………………………………………….……………………………………………….70
5.2 Software Function…………………………………….………………….…….…74

VIPAC-8XX Series User Manual 5
Figures
Figure 1.1: Dimensions of VIPAC-815…………...…………………………..…...9
Figure 1.2: Dimensions of VIPAC-816…………...…………………………..…...9
Figure 1.3: Dimensions of VIPAC-817…………...…………………………..….10
Figure 1.4: Dimensions of VIPAC-821…………...…………………………..….10
Figure 1.5: Front View of VIPAC-8XX Series………..…………….......…….11
Figure 1.6: Rear View of VIPAC-8XX Series………………………..………..11
Figure 2.1: Motherboard ASB-M7102 Layout….……….………...………17
Figure 2.2: Motherboard top draw of ASB-M7102…….………...………18
Figure 2.3: Motherboard bottom draw of ASB-M7102…….………..…19

VIPAC-8XX Series User Manual 6
Chapter 1 Getting Started
1.1 Features
15”, 15.6”, 17”, 21.5”TFT LCD panel PC
Intel Celeron® Quad Core N2930 Processor
Modular concept and fanless design
Support Project capacitive/ Resistive/ AR glass touch
Front bezel IP66 design
2 x Expansion slot and 1 x 2.5 SATA HDD space
Support WIFI, Bluetooth, Speaker; and 1 x USB and RFID at front bezel for option
Support panel mount
Support DC 9~36V power input; and AC input can be option
1.2 Specifications
VIPAC-815
P/R/G(H)
VIPAC-816
P/R/G(H)
VIPAC-817
P/R/G(H)
VIPAC-821
P/R/G(H)
System
Processor
Onboard Intel Celeron N2930 Processor (2M Cache,1.83GHz)
System Chipset
SoC
System Memory
2 x 204-pin SO-DIMM up to 8GB DDR3L 1333MHz
Outside I/O
Front I/O Ports
4 x USB 3.0 type A
2 x GbE LAN RJ-45
1 x RS-232/422/485 DB-9, COM1(default RS-232)
1 x RS-232 DB-9, COM2
1 x RS-422/485 DB-9, COM3(default RS-485)
1 x Line-out
1 x Mic-in
1 x VGA by DB-15
1 x HDMI
1 x System LED indication at front
2 x LED indication for HDD/system
1 x Power switch on/off
1 x 3-pin terminal block for DC power input
1 x 2-pin power switch
Option Function
1 x USB at front bezel

VIPAC-8XX Series User Manual 7
1 x RFID (13.56MHz)
4 x USB 2.0 type A
2 x DB-9 COM port
1 x 8-bit GPIO(3 in/out/VCC/GND)
2 x 2W Speaker
Storage
Storage
1 x 2.5”SATA HDD space
Watchdog timer
Watchdog timer
System reset, programmable via software from 1 to 255 seconds
Expansion
Expansion Slots
1 x Mini-PCIe slot full size (PCIe/USB/SATA, SATA by default)
1 x Mini-PCIe slot half size (PCIe/USB, PCIe by default)
1 x SIM slot for option
1 x PCI and 1 x PCIe x 1 slot
1 x WIFI/Bluetooth/LTE and antenna at rear side for option
LCD
Display type
15”color TFT
LCD
15.6”color
TFT LCD
17”color TFT
LCD
21.5”color
TFT LCD
Max. Resolution
1024 x 768
1366 x 768
1920 x 1080
1280 x 1024
1920 x 1080
Max. Color
16.7M
16.7M
16.7M
16.7M
Luminance (cd/m2)
420
300
350
250
Contrast Ratio
800:1
500:1
1000:1
3000:1
Viewing Angle
(H)/(V)
160/160
160/160
170/170
178/178
Backlight Lifetime
50,000 hrs
50,000 hrs
50,000 hrs
30,000 hrs
LCD (High brightness)
Display type
15”color TFT
LCD
15.6”color
TFT LCD
17”color TFT
LCD
21.5”color
TFT LCD
Max. Resolution
1024 x 768
1366 x 768
1280 x 1024
1920 x 1080
Max. Color
262K/16.2M
16.7M
16.7M
16.7M
Luminance (cd/m2)
1000
1000
1000
1000
Contrast Ratio
800:1
500:1
1000:1
3000:1
Viewing Angle
(H)/(V)
160/150
160/160
170/160
178/178
Backlight Lifetime
30,000 hrs
50,000 hrs
50,000 hrs
50,000 hrs
Touch
Type
Project Capacitive
Resistive
Interface
USB
Light Transmission
Over 90% for PCT

VIPAC-8XX Series User Manual 8
Over 80% for RT
Power
Power Input
DC 9~36V
Power Consumption
MAX: 33.4W
MAX: 34.5W
MAX: 42W
MAX: 42.5W
Mechanical
Front bezel
Aluminum (default)/Stainless (option)
Rear bezel
Steel metal chassis
Dimension
410 x 310 x 90
mm
412 x 227.5 x
90 mm
439 x 348 x 90
mm
557 x 362 x 90
mm
Net Weight
6.3 Kg
6.5 kg
7 kg
8.3 kg
Mounting type
Panel mount
Environmental
Operating Temperature
0~50 °C
Storage Temperature
-30~70 °C
Storage Temperature
10%~95%@ 40°C, non-condensing
Certificate
CE / FCC Class A
Operating System Support
OS Support
Windows 7 Pro for Embedded,
Windows Embedded Standard 7,
Windows Embedded 8.1 Industry Pro,
Windows Embedded 8 Standard,
Window 10 IoT 2016

VIPAC-8XX Series User Manual 9
1.3 Dimensions
Figure 1.1: Dimensions of VIPAC-815
Figure 1.2: Dimensions of VIPAC-816

VIPAC-8XX Series User Manual 10
Figure 1.3: Dimensions of VIPAC-817
Figure 1.4: Dimensions of VIPAC-821

VIPAC-8XX Series User Manual 11
1.4 Brief Description of VIPAC-8XX Series
The VIPAC-8XX comes with full metal chassis, while front bezel adopts IP66
Aluminum or SUS304 / 316 stainless steel for option. These systems are powered by
Intel Celeron N2930 1.83GHz processor and supports 2 x SO-DIMM DDR3L up to 8G
memory. And it’s equipped with optional USB and RFID function at the front panel, and
2 x speakers at the side to meet the ability for critical utilizations. Besides they feature
abundant I/O ports such as 4 x USB 3.0, 1 x VGA, 2 x LAN, 1 x line out, 1 x mic in, 3 x
COM ports, and so on; and 2x expansion slots which offer the expandability to
integrate versatile applications. Provide projected capacitive, resistive touch screen
and anti-reflection glass screen, wide range DC 9~36V power input, AT/ATX model and
panel mount. These systems are rich I/O alternative to get preparation for intelligent
automation panel PC.
Figure 1.5: Front View of VIPAC-8XX Series
Figure 1.6: Rear View of VIPAC-8XX Series

VIPAC-8XX Series User Manual 12
1.5 Installation of HDD
Step 1
There are 4 screws to deal with
when enclosing or removing the
chassis. Gently remove 4 screws.
Step 2
Remove the chassis.
Step 3
There are 4 screws around HDD
bay, you can remove screws of HDD.
Step 4
You can remove HDD by unscrewing
4 screws in the HDD bracket, and pull
out the HDD.

VIPAC-8XX Series User Manual 13
1.6 Installation of PCIe card
Step 1
There are 2 PCIe slot on the bottom
side. Gently remove 2 screws on side.
Step 2
Remove the bracket on the bottom.
Step 3
You can insert PCIe card to
expansion model function.
( PCIe Card maximum size can support 135mm(W) x
185mm(L) x 20.32mm(1 slot) )
L
W

VIPAC-8XX Series User Manual 14
1.7 Installation of mSATA SSD
Step 1
There are 4 screws to deal with
when enclosing or removing the
chassis. Gently remove 4 screws.
Step 2
Remove the chassis.
Step 3
You can insert mSATA SSD card to
expansion storage.
Step 4
You can use 2 screws to fasten SSD
card to motherboard.

VIPAC-8XX Series User Manual 15
Chapter 2 Motherboard
2.1 Motherboard Specifications
Specifications
Board Size
170mm x 170mm
CPU Support
Intel Celeron N2930 up to 2.16GHz
Chipset
SOC
Memory Support
2x SO-DIMM (204pins), up to 8GB DDR3L 1333MHz FSB
Graphics
Integrated Intel HD Graphics 313/854 MHz (N2930)
Display Mode
1x HDMI interface
1x DB15 VGA interface (or 2x6 Pin header)
1x 18/24 bit dual channel LVDS interface
Support
Resolution
Up to 1920 x 1200 for HDMI
Up to 1920 x 1200 for VGA
Up to 1920 x 1200 for LVDS (PS8625)
Three Display
HDMI + VGA
HDMI + LVDS（option)
VGA + LVDS（option)
Super I/O
Nuvoton NCT6106D
BIOS
AMI/UEFI BIOS
Storage
2x SATAII Connector (7Pin)
Ethernet
2x GbE ports by RJ-45 with intel 82583V controller
USB
4x USB 3.0 (type A) stack ports (HUB/USB30 )
3x USB 2.0 box Pin header for MIO1 (E_USB9/E_USB10/E_USB11)
1x USB 2.0 box Pin header for MIO2 (E_USB12)
1x USB 2.0 for M-PCIE1 (USB2)
Serial
1x RS232/422/485 port, DB9 connector for external (COM1)
pin 9 w/5V/12V/Ring select
1x RS232 port, DB9 connector for external (COM2)
pin 9 w/5V/12V/Ring select
1x RS232 header for internal (COM5)
1x RS232 header for internal (COM6), pin 9 w/5V/12V select
I/O Card TB-523 (option):
1x 422/485 select header for internal MIO1 (COM3)
1x RS232/422/485 select header for internal MIO1 (COM4)
Digital I/O
8-bit digital I/O by Pin header by MIO2
4-bit digital Input
4-bit digital Output

VIPAC-8XX Series User Manual 16
Battery
Support CR2477 Li battery by 2-pin header (1000mAh)
Audio
Support Audio via Realtek ALC269-X HD audio codec
Support Line-out, MIC by Jack（AUDIO1）
Line in/Line out/Mic by 2 x 6 Pin header （F_AUDIO1）
1x 4Pin Wafer Connector,Amplifier 2 channel output (SPK1)
Keyboard
/Mouse
PS2 K/B and Mouse by MIO2
1x PS/2 keyboard
1x PS/2 mouse
LPT
1x LPT Port by Pin header (LPT1)
Touch Ctrl
1x Touch ctrl header for TCH1 (PM6000 for USB4)
Power
Management
1x 3-pin power input connector (Wide range DC+9V~36V)
1x 1*4-pin power DC12V output connector (DC_OUT)
1x 2*2-pin power DC12V output connector (ATX12V_IN)
Switches and
LED Indicators
Power on/off switch by BT1 or MIO1 or MIO2
Reset switch by MIO2
Power LED status by MIO1 or LED2
HDD LED status by LED2
Expansion
1x mini PCIe slot (full,PCIe/USB2.0/LPC/SMbus)
2x PCI-express x1 extend by 4x10 pin socket (PCIE_1X)
1x CRT 2x6 Pin Header
Temperature
Operating: -20℃to 70℃
Storage: -40℃to 85℃
Humidity
10% - 90%, non-condensing, operating
Power
Consumption
12V/0.70A (Intel N2930 2.16 GHz Processor with 2GB DDR3L/HDD)
EMI/EMS
Meet CE/FCC class A

VIPAC-8XX Series User Manual 17
2.2 Motherboard Layout
Figure 2.1: Motherboard ASB-M7102 Layout

VIPAC-8XX Series User Manual 18
2.3 Jumpers and Connectors Location
Board Top
Figure 2.2: Motherboard top draw of ASB-M7102

VIPAC-8XX Series User Manual 19
Board Bottom
Figure 2.3: Motherboard bottom draw of ASB-M7102