ARC MGDR-200 User manual

1
Issue Date: 27/07/2022
WIRELESS IP44 OUTDOOR
DIMMER SOCKET PLUG
MGDR-200
CONTENTS
1. Overview and features Page 2.
2. Pairing / Un-pairing device Page 3.
3. Minimum Brightness setup Page 6.
4. Specifications Page 7.

2
Issue Date: 27/07/2022
1.Overview and features
Transform your electronic devices to wireless dimmer control with the outdoor
socket plug. All you need to do is plug the socket into an electrical outlet, plug a
device into the socket, and control your device using a remote control.
IP44 Rated with plug in use and poly-carbonate material to protect the unit from
water and dust and ensure the long-life of the socket.
Main features;
•Compatible to L and M series.
•High level of protection against ingress from water jets and dust.
•200W maximum control.
•Plugs into any regular electrical wall outlet.
•Intuitive, easy set up. Easy to use.
•Operating mode under Trailing Edge.
•32 memories, first in first out storage maintain.
•Scene status memory, create your desired atmosphere.
Not compatible to:
ARC Code switch system product range
OVERVIEW AND FEATURES

3
Issue Date: 27/07/2022
2.Pairing / Un-pairing Device
PAIRING
Pairing using LEARNING MODE:
1. Flip open the cover.
2. Plug in lamp / electronic device into socket then into an electrical outlet.
3. Within 6 seconds, on the remote control press the ‘ON’ button intend to be
paired; load will flash twice to confirm that the remote control is now paired.
NOTE: If no signal is received from a remote control within 6 seconds then the
socket will automatically exit learning mode without pairing the device.
PAIRING / UN-PARING DEVICE

4
Issue Date: 27/07/2022
UN-PAIRING
Removing single Device:
1. Unplug socket from the electrical outlet for at least 6 seconds.
2. Plug socket back into electrical outlet.
3. Within 6 seconds, on the remote control press the ‘OFF’ button intend to be
un-paired; load will flash twice to confirm that the remote control is un-paired.
PAIRING / UN-PARING DEVICE

5
Issue Date: 27/07/2022
CLEARING ALL MEMORY
Removing all memory stored in the socket.
1. Unplug socket from the electrical outlet for at least 6 seconds.
2. Plug socket back into electrical outlet.
3. Within 6 seconds, on the remote control press the ‘ALL OFF / GROUP ALL’
button; load will flash twice to confirm all memory stored inside the socket
has been deleted.
PAIRING / UN-PARING DEVICE

6
Issue Date: 27/07/2022
3.Minimum Brightness Level Setup
Socket can setup minimum brightness level.
There are total 4 level brightness to choose from.
To adjust the brightness level, please follow below setup.
With a remote control (LYCT-505)
1. Enter Learning mode (plug socket into an electrical outlet)
2. With the remote-control press and hold down ‘ON’ button for 3 seconds.
3. Load will flash twice to confirm it is now ready to setup minimum brightness.
4. Use the remote control and press ‘ON’ to dim up on level or press ‘OFF’
button to dim down one level. There are only 4 levels to adjust.
5. Once you have decided the brightness level, hold down ‘ON’ button for 3
seconds.
6. Load will flash twice and resume to the lowest dim level. This completes the
brightness level setup.
With a one button remote control (MKFT-1704 / MEBT-1706)
1. Enter Learning mode (plug socket into an electrical outlet)
2. With the remote-control press and hold down ‘ON/OFF’ button for 3 seconds.
3. Load will flash twice to confirm it is now ready to setup minimum brightness.
4. Use the remote control and press ‘ON/OFF’ button once to dim up on level or
press ‘ON/OFF’ button twice to dim down one level. There are only 4 levels
to adjust.
5. Once you have decided the brightness level, hold down ‘ON/OFF’ button for
3 seconds.
6. Load will flash twice and resume to the lowest dim level. This completes the
brightness level setup.
MINIMUM BRIGHTNESS LEVEL SETUP

7
Issue Date: 27/07/2022
4.Specifications
Input Rating: 230V~50Hz
Output Rating:
Supported Load
Wattage
Incandescent and halogen lamps
20-200W / 230V~
Electronic transformers
20-200W / 12V~
Inductive transformers
40-200W / 12V~
Dimmable energy saving lamps
3-24W / 230V~
Dimmable LEDs
3-24W / 230V~
Radio Frequency: 433.92MHz
Power consumption: 1W
Environment Temperature: 0-40 ºC
Range: Up to 50 m indoors / outdoors (Depends on
building materials)
In accordance with: Low Voltage Directive 2014/35/EU
RED Directive 2014/53/EU
CE Certification: The CE marked affixed to this product confirms
Its complaisance with the European Directives
Which apply to the product and in particular its
compliance with the harmonizes standards and
specifications.
Dimension (D x H) 53 x 70mm
Weight: 100 g
SPECIFICATION