ARC MYCR-3500 User manual

1
Issue Date: 05/02/2020
WIRELESS MINI
SOCKET SWITCH PLUG
MYCR-3500
CONTENTS
1. Overview and features Page 2.
2. Diagrams Page 3.
3. Pairing / Un-pairing device Page 4.
4. Operation Page 8.
5. Specifications Page 9.

2
Issue Date: 05/02/2020
1.Overview and features
Transform your electronic devices to wireless control with the mini socket switch
plug. All you need to do is plug the socket switch into an electrical outlet, plug a
device into the socket switch, and control your device using a remote control.
Main features;
•Compatible to L and M series’.
•3500W maximum resistive load control.
•Plugs into any regular electrical wall outlet.
•Intuitive, easy set up. Easy to use.
•32 memories, first in first out storage maintain.
•Scene status memory, create your desired atmosphere.
•Built-in manual On & Off button with LED indication.
Not compatible to:
ARC Code switch system product range
OVERVIEW AND FEATURES

3
Issue Date: 05/02/2020
2.Diagrams
Notes for the diagrams:
DIAGRAMS

4
Issue Date: 05/02/2020
3.Pairing / Un-pairing Device
PAIRING
Pairing using LEARNING MODE:
1. Plug in lamp / electronic device into socket switch.
2. Plug the socket switch into an electrical outlet.
PAIRING / UN-PARING DEVICE

5
Issue Date: 05/02/2020
3. Within 6 seconds, on the remote control press the ‘ON’ button intend to be
paired; LED on socket switch will quick flash and load will flash twice to
confirm that the remote control is now paired.
NOTE: If no signal is received from a remote control within 6 seconds then the
socket switch will automatically exit learning mode without pairing the device.
PAIRING / UN-PARING DEVICE

6
Issue Date: 05/02/2020
UN-PAIRING
Removing single Device:
1. Unplug socket switch from the electrical outlet for at least 6 seconds.
2. Plug socket switch back into electrical outlet.
3. Within 6 seconds, on the remote control press the ‘OFF’ button intend to be
un-paired; LED on socket switch will quick flash and load will flash twice to
confirm that the remote control is un-paired.
PAIRING / UN-PARING DEVICE

7
Issue Date: 05/02/2020
CLEARING ALL MEMORY
Removing all memory stored in the socket switch.
1. Unplug socket switch from the electrical outlet for at least 6 seconds.
2. Plug socket switch back into electrical outlet.
3. Within 6 seconds, on the remote control press the ‘ALL OFF / GROUP ALL’
button; LED on socket switch will quick flash and load will flash twice to
confirm all memory stored inside the socket switch has been deleted.
PAIRING / UN-PARING DEVICE

8
Issue Date: 05/02/2020
4.Operation
Socket switch is compatible to “Self Learning” system and M series remote
control. Please refer to the relevant user guide for detailed operation.
Manual ON & Manual OFF
Turn the load ON:
Press the ‘ON/OFF’ button once, LED on socket switch will flash once.
Turn the load OFF:
Press the ‘ON/OFF’ button once, LED on socket switch will flash once.
OPERATION

9
Issue Date: 05/02/2020
5.Specifications
Input Rating: 230V~50Hz
Output Rating: 3500W (Resistive Load)
Radio Frequency: 433.92MHz
Power consumption: 1W
Environment Temperature: 0-40 ºC
Range: up to 50 m indoors (Depends on building
materials)
In accordance with: Low Voltage Directive 2014/35/EU
RED Directive 2014/53/EU
CE Certification: The CE marked affixed to this product confirms
Its complaisance with the European Directives
Which apply to the product and in particular its
compliance with the harmonizes standards and
specifications.
Dimension (L x W x H) 53 x 53 x 58.4mm
Weight: 60 g
NOTE
⚫Please leave minimum of 1.5 meters in-between 2 or more socket switch.
⚫During standby mode, LED on module will not illuminate.
SPECIFICATION