ARC MGDR-3500 User manual

1
Issue Date: 18/12/2019
WIRELESS IP44 OUTDOOR
SOCKET PLUG
MGDR-3500
CONTENTS
1. Overview and features Page 2.
2. Pairing / Un-pairing device Page 3.
3. Specifications Page 6.

2
Issue Date: 18/12/2019
1.Overview and features
Transform your electronic devices to wireless control with the outdoor socket
plug. All you need to do is plug the socket into an electrical outlet, plug a device
into the socket, and control your device using a remote control.
IP44 Rated with plug in use and poly-carbonate material to protect the unit from
water and dust and ensure the long-life of the socket.
Main features;
•Compatible to L and M series.
•High level of protection against ingress from water jets and dust.
•3500W maximum resistive load control.
•Plugs into any regular electrical wall outlet.
•Intuitive, easy set up. Easy to use.
•32 memories, first in first out storage maintain.
•Scene status memory, create your desired atmosphere.
Not compatible to:
ARC Code switch system product range
OVERVIEW AND FEATURES

3
Issue Date: 18/12/2019
2.Pairing / Un-pairing Device
PAIRING
Pairing using LEARNING MODE:
1. Flip open the cover.
2. Plug in lamp / electronic device into socket then into an electrical outlet.
3. Within 6 seconds, on the remote control press the ‘ON’ button intend to be
paired; load will flash twice to confirm that the remote control is now paired.
NOTE: If no signal is received from a remote control within 6 seconds then the
socket will automatically exit learning mode without pairing the device.
PAIRING / UN-PARING DEVICE

4
Issue Date: 18/12/2019
UN-PAIRING
Removing single Device:
1. Unplug socket from the electrical outlet for at least 6 seconds.
2. Plug socket back into electrical outlet.
3. Within 6 seconds, on the remote control press the ‘OFF’ button intend to be
un-paired; load will flash twice to confirm that the remote control is un-paired.
PAIRING / UN-PARING DEVICE

5
Issue Date: 18/12/2019
CLEARING ALL MEMORY
Removing all memory stored in the socket.
1. Unplug socket from the electrical outlet for at least 6 seconds.
2. Plug socket back into electrical outlet.
3. Within 6 seconds, on the remote control press the ‘ALL OFF / GROUP ALL’
button; load will flash twice to confirm all memory stored inside the socket
has been deleted.
PAIRING / UN-PARING DEVICE

6
Issue Date: 18/12/2019
3.Specifications
Input Rating: 230V~50Hz
Output Rating: 3500W (Resistive Load)
Radio Frequency: 433.92MHz
Power consumption: 1W
Environment Temperature: 0-40 ºC
Range: Up to 50 m indoors / outdoors (Depends on
building
materials)
In accordance with: Low Voltage Directive 2014/35/EU
RED Directive 2014/53/EU
CE Certification: The CE marked affixed to this product confirms
Its complaisance with the European Directives
Which apply to the product and in particular its
compliance with the harmonizes standards and
specifications.
Dimension (L x W x H) 53 x 70mm (D x H)
Weight: 100 g
SPECIFICATION