8
Issue Date: 30/09/21
3.Minimum Brightness Level Setup
Socket switch has the ability to setup minimum brightness level.
There are total 4 level brightness to choose from.
To adjust the brightness level, please follow below setup.
With a remote control (LYCT-505)
1. Enter into Learning mode (socket switch into an electrical outlet)
2. With the remote-control press and hold down ‘ON’ button for 3 seconds.
3. Load will flash twice to confirm it is now ready to setup minimum brightness.
4. Use the remote control and press ‘ON’ to dim up on level or press ‘OFF’
button to dim down one level. There are only 4 levels to adjust.
5. Once you have decided the brightness level, hold down ‘ON’ button for 3
seconds.
6. Load will flash twice and resume to the lowest dim level. This completes the
brightness level setup.
With a one button remote control (MKFT-1704 / MEBT-1706)
1. Enter into Learning mode (socket switch into an electrical outlet)
2. With the remote-control press and hold down ‘ON/OFF’ button for 3 seconds.
3. Load will flash twice to confirm it is now ready to setup minimum brightness.
4. Use the remote control and press ‘ON/OFF’ button once to dim up on level or
press ‘ON/OFF’ button twice to dim down one level. There are only 4 levels
to adjust.
5. Once you have decided the brightness level, hold down ‘ON/OFF’ button for
3 seconds.
6. Load will flash twice and resume to the lowest dim level. This completes the
brightness level setup.
