Arca-Swiss Core60leveler User manual

The movement of the camera is effected inside the
circular arc, thus a change of the object distance as well
as the image selection hardly develops.
Core60leveler : ±10°
Core75leveler : ±15°
ARCA-SWISS International S.A.R.L.
29, rue de Châtillon, École Valentin
FR-25048 Besançon, France
[email protected]
STD: ++33 381 85 40 60
ARCA-SWISS QuickLink
We recommend
Finally a professional solution that eliminates the
tedious fixing of the tripod head.
ARCA-SWISS presents the new tripod mounting
QuickLink. The combination of a mounting plate for
the tripod and an insert plate which is attached to the
tripod head makes attaching and detaching the tripod
head child's play. The installed plates can thus be left
permanently on the tripod or on the tripod head.
By means of a solid bayonet, the tripod head with its
insert plate is placed into the mounting plate and
securely fixed by a knurled rotating ring.
ARCA-SWISS X-table System
macro-Table
X-Table
The X-Table System offers incredible precision when
working in macro photography! In addition to fine
focusing in the longitudinal plane, the X-Table
System also allows you to adjust the fine operation in
the transverse plane thanks to the crossover.
A R C A
S WI S S
ARCA-SWISS
Core60leveler
A R C A
S WI S S
ARCA-SWISS
Core75leveler

click!
Congratulations on your purchase of the latest ARCA-SWISS
CoreLeveler.
IMPORTANT: the panning situated on top of the CoreLeveler
should be used as the LAST adjustment !
Exclusive to the Core 75 leveler: telescopic knobs
panning
locking
levers
3/8"-16 Thread
gear self-locking
control knob
All tripod heads from ARCA-SWISS are available with a choice of quick release: Classic,
flipLock® and monoball®Fix. The Classic and flipLock® systems are equipped with a
double dovetail so that you can fit the classic camera plates in the upper dovetail and the
monoball®Fix to the bottom. The Fix system is compatible with the monoball®Fix plates.
All three of them are compatible with the monorails of the ARCA-SWISS cameras.
ARCA-SWISS quick release device
Classic flipLock®
monoball®Fix
Quickset device Classic instructions :
To open, turn the knob counterclockwise.
To close, turn the knob clockwise.
monoball®Fix instructions :
1. Open by pulling the clamping lever with your thumb
2. Insert the cameraplate (side opposite the clamping lever)
3. if necessary, center the cameraplate
4. important: lock by clicking on the clamping lever !
Sliding position
3
Open position
1
2
Lock position
4 click !
monoball®Classic
camera plate
monoball®Fix
camera plate
ARCA-SWISS
monorail unit
Extension
bracket
Incremental panning ClicPan® (cp)
Option for the Core75leveler
150 15
40° OFF
75 30 60 30 45 60 75 90
6° 7.5°
10°
Panning
lock lever
(4)
Adjustment ring
(1)
OFF position
(3)
Index scale
(2)
4
flipLock® instructions :
The ARCA-SWISS flipLock® quick release allows the use of the (most common)
ARCA-SWISS "classic" camera plates, thanks to the two levels, all camera plates are also
compatible with the new standard monoball®Fix.
The "classic" camera
plates are fixed on
the upper level of
the quick release.
The first position - locked
position - closed/locked
lever - does not allow any
movement.
The second position - sliding
position - lever rotated 90°-
allows safe adjustment of the
desired position.
The third position -
opening position - lever
by 180° - allows full
release/open position.
The change from one position to the other is
performed as follows:
1. Pull the release button towards you
between your thumb and forefinger.
2. Then turn the lever 90° to the stop.
To change from the sliding position to the
open position:
3. Push the serrated pin outward with a
press of your thumb.
4. Then swivel the lever until it is fully open.
The ARCA-SWISS quick release flipLock® offers 3 positions:
The camera plates with
the new standard
monoball®Fix are fixed
on the lower level.
The ARCA-SWISS flipLock® quick release offers an adjustment
option that adapt to various camera plates that comply with the
"ARCA-SWISS standard". Tolerances may vary from brand to brand.
1
2
3
! longer edge of the plate toward the lever
(1) Select a panoramic overlap interval by rotating the white index mark on the
clicPan® (brass) adjustment ring. Rotate the ring until the index mark is aligned with
your preferred interval detent setting.
Ten positions are provided on the lower scale - 40° (9 stops), 30° (12 stops), 24° (15
stops), 20° (18 stops), 15° (24 stops), 12° (30 stops), 10° (36 stops), 7.5° (48 stops),
6° (60 stops) with an “OFF” position for 360° free panning movement.
The clicPan® adjustment ring will turn in either direction. When rotated, the
adjustment ring will stop and “clic” into the next detent setting.
Once a setting has been chosen, the mounted camera will pan in equal increments
through a 360° radius, with an audible “clic” at each position.
(2) The degree of rotation can be visually checked using the upper index scale.
(3) Move the clicPan® ring to the “OFF” position when 360° free panning is required.
(4) To stop all panning rotation, tighten the upper panning lock lever.
The upper pan must be unlocked when making incremental panoramic captures using
one of the detent settings.