PROAIM 9CTH-TMP User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything
that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Camera Cage (9CTH-TMP)
Assembly Manua l
2x Brackets with
15mm rod holder
Top handle with so grip
Quick release adapter
plate
Tripod Mounng Plate
2 x 300mm female
rods
2x 150mm male rods
2x 200mm female rods
Accessories

2
Camera Cage Setup
 Insert the 300mm long rods in quick release
rod adapter and Insert the tripod mounng
plate in 300mm long rods & ghten the Knob.
 Insert the 300mm long rods into the front and
back 15mm slots on the Cage bracket. Then
insert the set of 200mm rods into the top rod
holder of cage.
 Aach the top handle on the front bracket of
cage .Then aach and secure the camera on
the quick release plate.
 Insert the quick release into the adapter by
pressing the side locking pin and secure it
with the side knob.
YOUR PROAIM CAMERA CAGE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL
ACCESSORIES)

3
Warranty: We oer one year warranty for our products from date of purchase. Within this period
of me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon
costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from
mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone
other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise
our utmost support and care unl you use our product.