arcelik Grundig GEBM 47011 BP User manual

GRUNDIG BEST
1 | EN
BARBAROS-GRUNDIG-BEST
BUILT IN OVEN
SERVICE MANUAL

GRUNDIG BEST
2 | EN
1. COVER
2.CONTENTS
3. SAFETY WARNING ....................................................................................................................5
3.1 GENERAL SAFETY ...............................................................................................................................5
3.2. SAFETY FOR CONFİGURATİONS .............................................................................................................5
3.3 INFORMATİONS FOR CONSUMER ...........................................................................................................6
4.TECHNICAL SPECIFICATIONS ......................................................................................................7
5. PRODUCT ASSEMBLY/ ASSEMBLY RULES/ SETTINGS .................................................................8
5.1 PRODUCT TRANSPORTATION ................................................................................................................8
5.2 UNPACKING PRODUCT ........................................................................................................................9
5.3 CONTROLLING THE SETUP PLACE AND ENERGY SOURCES. ..........................................................................11
5.3.1 Measurement control of the mounting place ......................................................................11
5.3.2 Control of the electrical installation.....................................................................................12
5.4 ELECTRİCAL CONNECTİON...................................................................................................................12
6.USE OF THE PRODUCT .............................................................................................................13
6.1 INİTİAL USE.....................................................................................................................................13
6.1.1 Language Adjustment ..........................................................................................................13
6.1.2 Timer Adjustment.................................................................................................................15
6.1.3 Brightness Adjustment .........................................................................................................16
6.1.4 Noise Level Adjustment ........................................................................................................18
6.1.5 How to Operate Oven...........................................................................................................19
6.1.6 Operating Modes..................................................................................................................22
6.1.7 Using the keylock..................................................................................................................29
6.1.9 Quick Meal Functions ...........................................................................................................32
7.BY PRODUCTS/PRODUCTS LABELS USED..................................................................................37
7.1 PERIPHERALACCESSORIES ..................................................................................................................37
7.2 TAGS AND DESCRIPTIONS USED IN THE PRODUCT ....................................................................................38
7.2.1 Type the label .......................................................................................................................38
7.2.2 Barcode Label .......................................................................................................................39
7.3.3 Energy Label; ........................................................................................................................39
8. GENAREL WORKING PRINCIPLE...............................................................................................42
8.1 OPERATING MODES .........................................................................................................................45
8.1.1 The Normal Operatıng Mode ...............................................................................................45
8.1.2 Fast Heading / Booster.........................................................................................................46
8.1.2 Service Mode ........................................................................................................................46
9. COMPONENT OF LIST / COMPONENT WORKING PRINCIPLES ..................................................50
9.1 COMPONENTS TECHNİCAL DATA .........................................................................................................50
9.2 COMPONENT WORKING PRINCIPLES..........................................................................................50
10.FAULT/ERROR CODES ............................................................................................................54
10.1 HARDWARE ERRORS .......................................................................................................................54
10.2 HARDWARE ERRORS-2....................................................................................................................55

GRUNDIG BEST
3 | EN
10.3 ON/OFF ALARM,LAMPAND START/STOP BUTTON ERRORS.....................................................................56
10.4 TOUCH CONTROL ERRORS................................................................................................................57
10.5 PT 500 ERRORS-1 ........................................................................................................................58
10.6 PT 500 ERRORS-2 ........................................................................................................................59
10.7 DİSPLAY ERRORS ...........................................................................................................................60
10.8 DOOR SWİTCH ERRORS...................................................................................................................61
10.9 OVEN LAMP ERRORS......................................................................................................................62
10.10 TOP RESİSTANCE ERRORS ..............................................................................................................63
10.11 BOTTOM RESİSTANCE ERRORS ........................................................................................................64
10.12 TOP INTERNAL RESİSTANCE ERROR ...................................................................................................65
10.13 TURBO RESİSTANCE ERRORS ..........................................................................................................66
10.14 VENTİLATION 1ST LEVEL ENGİNE FAILURE ..........................................................................................67
10.15 PYRO OVEN VENT ENGİNE FAİLURE İN 2ND STAGE................................................................................68
10.16 TURBO MOTOR ERRORS.................................................................................................................69
10.17 THE ROTİSSERİE MOTOR FAULT........................................................................................................70
10.18 THE İNTERNAL TEMPARATURE OF THE OVEN.......................................................................................71
10.19.PYRO PRODUCTS TO THE MASSES DOOR LOCK ERRORS(DOOR SWITCH OR LOCK MECHANİSM-1.....................72
10.20 PYRO PRODUCTS TO THE MASSES DOOR LOCK ERRORS(DOOR SWITCH OR LOCK MECHANİSM-2.....................73
10.21 PYRO PRODUCT TO THE MASSES ERROR DOOR LOCK(LOCK THERMOSTAT).................................................74
11.RESİSTANCE FAULTS ..............................................................................................................75
11.1 RESİSTANCE DOES NOT WORK;THE FOOD İS NOT COOKED........................................................................75
11.2 LAMP FAULT .................................................................................................................................76
11.2.1 Furnace is working but the oven does not illuminate ........................................................76
11.2.2 Oven does not work,oven lamp does not light,..................................................................77
11.3 TERMOSTAT FAULT.........................................................................................................................78
11.3.1 Furnace runs continuosly,the thermostat is not tripped....................................................78
11.4 THERMİNAL FAULT .........................................................................................................................79
11.4.1There is no power from the terminal does not diffuse into the electric furnace ................79
11.4.2 When the fuse blows the oven is plugged into the Wall socket.........................................80
12 COMPONENTS CONTROL ......................................................................................................81
13.CIRCUIT DIAGRAM.................................................................................................................83
14. COMPONENT ASSEMBLY / DEMONTAJ USED EQUIPMENT ....................................................84
15.COMPONENT ASSEMBLY / DİSASSEMBLY...............................................................................85
15.1 REPLACEMENT OF THE PANEL............................................................................................................85
15.2 REPLACEMENT OF THE MAIN BOARD...................................................................................................88
15.3 REPLACEMENT OF THE CLOCK DİSPLAY ...............................................................................................90
15.4 STEAM MODULE(ONLY İN STEAM MODELS).........................................................................................92
15.5 REPLACEMENT OF THE WATER TANK CAP .............................................................................................93
15.6 REPLACEMENT OF THE WATER TANK CAP CASKET..................................................................................94
15.7 REPLACEMENT OF THE WATER TANK...................................................................................................95
15.8 REPLACEMENT OF THE LEVEL SENSOR BOARD .......................................................................................95
15.9 REPLACEMENT OF THE WATER VALVE..................................................................................................96
15.10 REPLACEMENT OF THE STEAM GENERATOR ........................................................................................97
15.11 REPLACEMENT OF THE MODIFICATION OF THE STEAM INLET PIPE ............................................................99

GRUNDIG BEST
4 | EN
15.12 REPLACEMENT OF THE MODIFICATION OF WATER LEVEL INDICATOR ........................................................99
15.13 REPLACEMENT OF THE FRONT COVER..............................................................................................100
15.14 REPLACEMENT OF THE FRONT COVER HINGE ......................................... ERROR!BOOKMARK NOT DEFINED.
15.15 REPLACEMENT OF THE COVER 2GLASS REPLACEMENT.............................. ERROR!BOOKMARK NOT DEFINED.
15.16 REPLACEMENT OF THE 4-GLAZED REMOVABLE DOOR........................................................................104
15.17 REPLACEMENT OF THE HANDLE .....................................................................................................108
15.18 REPLACEMENT OF THE UPPER WALL ...............................................................................................110
15.19 REPLACEMENT OF THE BI-METAL THERMOSTAT ...............................................................................110
15.20 REPLACEMENT OF THE ENGINE COOLING .........................................................................................111
15.21 REPLACEMENT OF THE VENTILATION PLATE ......................................................................................112
15.22 REPLACEMENT OF THE AIR-CONDITIONING THERMOSTAT ....................................................................113
15.23 REPLACEMENT OF THE REAR WALL .................................................................................................114
15.24 REPLACEMENT OF THE SIDE DECOR ................................................................................................117
15.25 REPLACEMENT OF THE BOTTOM OF THE BASE PLATE ..........................................................................117
15.26 REPLACEMENT OF THE SWİTCH......................................................................................................119
15.27 CATALYTIC REMOVAL OF THE INNER SIDE WALL. ................................................................................121
15.28 REPLACEMENT OF THE GRID RESISTANCE .........................................................................................122
15.29 REPLACEMENT OF THE OVEN HEATING ............................................................................................124
15.30 REPLACEMENT OF THE TURBO RESISTANCE ......................................................................................126
15.31 REPLACEMENT OF THE SEAL OVEN CHANGED ....................................................................................128
15.32 REPLACEMENT OF THE TURBO ENGINE ............................................................................................129
15.33 REPLACEMENT OF THE TERMINAL ..................................................................................................130
15.34 REPLACEMENT OF THE RUNNERS ...................................................................................................132
15.35 REPLACEMENT OF THE OVEN LAMP ................................................................................................132
15.36 SQUARE LAMP REPLACEMENT........................................................................................................133
15.37 REPLACEMENT OF THE CATALYST ...................................................................................................135
15.38 PYRO DOOR LOCK BE REPLACED .....................................................................................................136
15.31 PYRO VENTILATION SHEET TO BE REPLACED......................................................................................137
15.32 PYRO COOLING OF THE ENGINE BE REPLACED ...................................................................................139
15.33 COOLING OF THE ENGINE THERMOSTAT BE REPLACED.........................................................................140

GRUNDIG BEST
5 | EN
3. SAFETY WARNING
This section contains safety instructions that will help protect from risk of personal injury or
property damage.
Throughout this user manual the following symbols are used.
Important information or useful hints about usage.
Warning of hazardous situations with regard to life and property.
Warning of electric shock..
Warning of risk of fire.
Warning of hot surfaces.
3.1 General Safety
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
•Installation and repair procedures must always be performed by Authorized
Service Agents. The manufacturer shall not be held responsible for damages
arising from procedures carried out by unauthorized persons which may also void
the warranty. Before installation, read the instructions carefully.
•Do not operate the product if it is defective or has any visible damage.
Control that the product function knobs are switched off after every use.
3.2. Safety for Configurations
Control the area of the configuration is appropriate.
It is important that sources of energy is near the product.
Do not lay the network wire on the hot surface.If not wire coalasces and this couses
short circuit.
Be cafeful during the configuration wire is not cut or deformed.If not change them with
new one.
There is not a component to release the gases resulting of the burning in the
product.Set up the product according to the configuration rules.Especially,be careful
with the airing tools and needs.

GRUNDIG BEST
6 | EN
3.3 Informations for Consumer
Product may be hot during the usage.Do not touch with hot parts ,inside the
oven,heating components etc. .When the product is working it is hot so do not put
combustable materials near the product.
Do not wash the product with water! It is dangerous for electrick shock!Ürünü, üzerine s
Do not heat the closed preserve jar or can with the product.Presure may cause the
explosion.
Do not clean while the product is working.
Do not change in anything on the porduct or any repair instead of some problems in the
user guide.
If there is no door or window for airing ,blower must be built.
Use a glove that is heat resistant during put/remove the meal to the hot oven
Do not use the product if front glass is broken or removed or any deformation on the
tweel block.
When tweel block is open, be careful about children do not sit down on it.
Do not hang cloth or towel or something like them on handle.

GRUNDIG BEST
7 | EN
4.TECHNICAL SPECIFICATIONS
Refer to the product specifications manusoft.

GRUNDIG BEST
8 | EN
5. PRODUCT ASSEMBLY/ ASSEMBLY RULES/ SETTINGS
5.1 Product Transportation
Control the view of the product for any damage which may occur in the carrying period.
To carry or move the product, do not use
door or handle of the product. Door,
handle or hinges can be harmed.
Product should be carried by two person for
safety of the product and ergonomics
When the product is being carried or the
product is being put to the ground, do not put it
keenly, do not drag it and do not skid it from
stairs.

GRUNDIG BEST
9 | EN
5.2 Unpacking Product
To consider product changing in the mounting process, please do not harm package,
product and the product package when extracting.
Take lathes on the product’s front and behind sides, like shown in below.
Extract package with a knife without harming top
and bottom carton.
Take the top carton.

GRUNDIG BEST
10 | EN
Symbols on the package of the products and meaning of them;
Preserve
from damp
Fragile
Carry with
barrow in
this way.
Do not carry
the product
like in the
picture
Carry the product
in this way by
squeezing with
clamp
Do not step on
the product.
Take stripers which are left and
right side of the products.

GRUNDIG BEST
11 | EN
5.3 Controlling the setup place and energy sources.
5.3.1 Measurement control of the mounting place
In the setup of the product, local standards about electric and gas should be applied.
Product is designed according to kitchens’ bench so it is placeable. Appropriate
safety interval should be between kitchen wall and the furniture. For appropriate
interval, please look at the picture.(values are mm type).
Used sides, synthetic laminates and glues should be durable to the head (min.100°C).
Product should be stayed with the same height with kitchen furnitures.
If there is a drawer bottom of the oven, a shelf should be used between oven and the
drawer.

GRUNDIG BEST
12 | EN
5.3.2 Control of the electrical installation
The following values for the control of electrical installation products with the product should
be considered.
Voltage / frequency
220-240 V ~ 50 Hz
Total power consumption
3,1kW
Fuse
min. 16 A
Cable type / section
H05VV-FG
3 x 1,5 mm2
Cable length
max. 2 m
5.4 Electrical connection
Connect the product to a grounded outlet/line protected by a fuse of suitable capacity as
stated in the "Technical specifications" table. Have the grounding installation made by a
qualified electrician while using the product with or without a transformer. Our company
shall not be liable for any damages that will arise due to using the product without a
grounding installation in accordance with the local regulations.
Connection must comply with national regulations.
The mains supply data must correspond to the data specified on the type label of the
product.
Open the front door to see the type label.

GRUNDIG BEST
13 | EN
6.USE OF THE PRODUCT
Plug in the power cord and turn on the device fuse. The language setting of the clock
setting before you need to do.
NOTE: Each value you set, it is automatically saved when you exit the current menu.
NOTE: Before using the oven, adjust the time.
6.1 Initial Use
6.1.1 Language Adjustment
1. On/Off Button
2. Programme Selection Button
3. Temperature-Weight-Booster Button
4. Menu Knob (Left-Right)
5. Approve Button
6. Time and Options Button
7. Start/Stop Button
Quick start menu appears on display while
oven starting for the first time.

GRUNDIG BEST
14 | EN
Language could be changed while oven is
closed only. Please close the oven first by
touching On/Off button (1).
Touch the button (6) for short intervals
until “Language” text seen on the
display.
Select language by turning knob
(4) left or right.
Approve your selection by touching
button (6).

GRUNDIG BEST
15 | EN
6.1.2 Timer Adjustment
1. On/Off Button
2. Programme Selection Button
3. Temperature-Weight-Booster Button
4. Menu Knob (Left-Right)
5. Approve Button
6. Time and Options Button
7. Start/Stop Button
Come to timer adjustement screen by
touching button (6) with three times.

GRUNDIG BEST
16 | EN
6.1.3 Brightness Adjustment
1. On/Off Button
2. Programme Selection Button
3. Temperature-Weight-Booster Button
4. Menu Knob (Left-Right)
5. Approve Button
Adjust the time by using knob (4).
Approve your selection by button (5).

GRUNDIG BEST
17 | EN
6. Time and Options Button
7. Start/Stop Button
Adjust the brightness level by using knob
(4).
Approve your selection by button (5).
Come to brightness level adjustment
screen by touching button (6) for
short intervals.

GRUNDIG BEST
18 | EN
6.1.4 Noise Level Adjustment
Come to noise level adjustment
screen by touching button (6) for
short intervals.
Adjust the noise level by knob (4).
Approve your selection by button(5).

GRUNDIG BEST
19 | EN
6.1.5 How to Operate Oven
1. On/Off Button
2. Programme Selection Button
3. Temperature-Weight-Booster Button
4. Menu Knob (Left-Right)
5. Approve Button
6. Time and Options Button
7. Start/Stop Button
Quick Start Menu
1
Shelf Positions
2
Function Display
3
Temperature/Wight Indicator
Screen
4
Oven Inner Temperature Symbol
5
Current Time Indicator Field
6
Text Display

GRUNDIG BEST
20 | EN
Touch button (1) to switch on the oven
Initial operation screen appears when
oven is turned on.
Turned the Menu Proceed Knob (4)
left/right to select desired operation
mode (function).