Architectural Mailboxes MONTROSO MON00BPEC User manual

CONTACT YOUR LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT THE
STREET. GENERALLY, MAILBOXES ARE INSTALLED AT A HEIGHT OF 41-45 INCHES FROM THE ROAD SURFACE TO INSIDE FLOOR OF THE
MAILBOX OR POINT OF MAIL ENTRY (LOCKED DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD
EDGE TO THE MAILBOX DOOR.
1Turn the top post upside down and place on a flat
surface. Insert the bottom post into the top post by
lifting the post assembly up and pounding it on a
non-abrasive surface until the post assembly is
connected securely.
Position the (2) post brackets and (2) L-brackets as
shown. Attach the (2) post brackets and the (2)
L-brackets to the post assembly using (4) screws and
(4) hex nuts.
2
R
Phillips’s Head Screwdriver
Use of concrete
recommended in
areas with loose soil.
Adjustable Wrench
Tools for Assembly/ Herramientas para ensamblaje T
Post Hole Digger
Level
ools and Supplies for Installation/ Herramientas y Equipamiento Para Instalaci
Mailbox (not included)
MONTROSO™
Mailbox Post | Model # MON00BPEC
ASSEMBLY INSTRUCTIONS
Top Post
x 8, Hex Nut
(8) Hex Nut
x 8, Screw
x 2, Post Bracket
Parts/ Piezas
Bottom Post
x 2, L-Bracket
Parts (included) Tools and Supplies (not included) Video Instructions
(scan QR code with phone camera)

© 2023, Architectural Mailboxesrevised 6/30/2023
Attach mailbox (not included) to the post assembly
using (4) screws and (4) hex nuts.
3Check for underground cables or pipes before digging.
Dig a hole measuring 12” deep and 8” in diameter.
Place the mailbox post assembly in the hole. Replace
and pack down the dirt around the post making sure
the assembly remains level.
Note: Use of concrete recommended.
4
Questions, Comments, Concerns?
[email protected]
www.architecturalmailboxes.com
Find us on social media!
@archmailboxes