Archos 62 Xenon Installation and user guide

Xenon Series
How to reinitialize my 62 Xenon ?
This process is recommended for your device if : it is frozen, it
doesn’t turn on or you are experiencing a software issue. It will allow you
to perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them. We strongly recommend to
back them up first. Keep in mind that your device’s battery must be
charged enough to perform this operation.
1. If you can have access to the Android™ interface
a. Select the Settings app then select Backup & reset > Factory data
reset
b. To delete music, photos and other user data, you must erase the
internal SD card. Tick "Erase phone storage"
c. Select "Reset phone" and confirm
2. If you can’t access the Android™ interface
a. Turn off the device by using ON/OFF (remove then replace the
battery if necessary)
b. While holding Volume +, press ON/OFF until the device turns on
c. Keep holding Volume + until the recovery menu is displayed
Use the volume buttons to navigate and ON/OFF to validate.
If you failed to access to the recovery
menu, please start again from the
beginning.
Page 1 / 2
(c) 2020 ARCHOS <[email protected]> | 2020-07-01 17:11
URL: http://faq.archos.com//index.php?action=artikel&cat=33&id=382&artlang=en

Xenon Series
a. Select "Wipe data/factory reset" and validate to restore your device
to its default settings.
b. Select "Yes -- delete all user data" and validate to remove all the
user data.
c. Select "Reboot system now" and validate to reboot the device.
Unique solution ID: #1733
Author: Admin FAQ
Last update: 2015-03-05 14:59
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2020 ARCHOS <[email protected]> | 2020-07-01 17:11
URL: http://faq.archos.com//index.php?action=artikel&cat=33&id=382&artlang=en