Argos Home Ottawa Bar Stool 600/0444 User manual

Ottawa Bar Stool
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
Dimensions
Width - 46.5cm
Depth - 39.5cm
Height - 98.5cm
If you need help or have damaged or missing parts, call the Customer Helpline:08456 400800
600/0444
Issue 1 - 28/11/09
600/0468
600/1429

1
Safety and Care Advice
-
Please read these instructions fully before starting assembly
Important
Clean using a damp cloth or a
proprietary domestic furniture
polish. Do not use abrasive
cleaners.
This product should not be
discarded
with household waste.
Take to your local authority waste
disposal only.
Care and maintenance
From time to time check that
there are no loose screws on
this unit.
Check you have all the
components and tools listed on
pages 2 and 3.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Dispose of all packaging
carefully and responsibly.
Place the product on flat and
steady surface during use.
Keep these instructions for
future use.

Please check you have all the parts listed below
Components - Parts
1Seat pad (46x17cm)
2
2Stem (42x30cm) 3Piston (52x5.8cm)
4Collar (7.5x2cm) 5Base (38x8cm)

Please check you have all the fittings listed below
Components - Fittings
3
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
A B
Allen screw x 4 Allen key x 1

Attaching seat frame
Place seat pad upside
down onto a clean flat
surface.
Ensuring the foot rest is at
the front, assemble main
stem to seat pad
using fixings .
Assembly Instructions
Step 1
Attaching base frame
Place base onto the
floor.
Locate collar onto the
base.
Firmly push piston into
the base.
Step 2
4
1
1
2
21
A
A
A
A
A
5
4
3
5
4
3
Front
Front
Back
3

Attaching seat frame
and base frame
First remove the black
plastic cap on top of
cylinder .
Carefully lower seat
assembly onto the end of
piston until the piston
is located into the seat.
Firmly push down on the
seat to ensure it is securely
located.
Assembly Instructions
Step 3
3
3
3
3
5
Remove cap

Assembly Instructions
Height adjustment
The lever on the right hand
side of the chair can be
used to adjust the chair
height.
Simply lift the handle to
operate.
Note: Due to dryness of
the seals during shipping,
it may take several
attempts to operate the
height adjustment function
first time.
Note: If the adjuster will
still not function correctly,
remove the seat assembly
and depress the top of the
piston to fully extend it.
Re-assemble the seat and
try adjuster again.
Assembly is complete.
Step 4
If you need help for have damaged or missing parts, call the Customer helpline:08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
3