ARRI RF-2400 User manual

RF-2400 Radio Module Pairing Guide
For ARRI TRINITY 2 SUP 1.4
U S E R M AN U A L
April 2023

Pairing the TRINITY 2 RF-2400 Radio Modules 2
1 Pairing the TRINITY 2 RF-2400 Radio Modules
ADVICE
Both RF-2400 Radio Modules can only be paired through the Remote Control Panel RCP-3.
► Power up and switch on the RCP-3
► Insert the first RF-2400 Radio Module
► Go to the Main Menu.
► Tab Radio Setup
► Tap Pairing

Pairing the TRINITY 2 RF-2400 Radio Modules 3
► After a short time, you will be asked to remove the first module and
insert the second module.
► So, remove the first radio module and insert the second module.
► Insert the second radio module.
► Again, after a short time, the information appears that the second
module has also been paired.
► Now you can plug the first module into the radio adapter on the
TRINITY 2.
ADVICE
Be sure to use the Rubber Duck antenna on the radio module lo-
cated in the TRINITY 2 head.
The standard antenna will block the tilt movement of the tilt axis!