Artecta Indalo A0244024 Dimensions

Architainment
LED technology
THE ART OF LIGHTING
66
OUTDOOR RATED
Dimensions in mm
1.5
66
Outdoor
A0244024 Indalo Strip-18 RGB 40x12°
The Indalo Strip-18 RGB is a compact and robust exterior lighting fixture,
suitable for a wide range of wall-washing and accent lighting applications.
The sleek and modern design of this fixture allow for exellent integration into
most kinds of archtecture. Used in conjunction with the Indalo Drive-4, the
Indalo Strip-18 RGB is an extremely flexible lighting tool.
Technical specifications:
LED system: RGB, 6xRed, 6xGreen, 6xBlue
Optics: 40x12°
Power consumption: max. 33W
Lumen output: 100% Red 369 Lm
100% Green 450 Lm
100% Blue 98 Lm
100% R+G+B 837 Lm
Peak intensity: 2176cd
Housing: Die cast Aluminium, off-white powder coated
Protection: IP66
Dimensions: 800 x 45 x 36mm
Weight: 1.5kg
Operating Temperature: -40°C / +45°C
Cooling system: Convection
Input current: 600mA constant current (also possible at 350mA)
Controll system: Powered by Indalo Drive, Stand-alone or DMX
DMX-channels: 3
ncluded IP65 3-way serial connector
Attention: This high power LED fixture can not be installed under water
IP20 RJ45
connector
cable length: +/- 1.9mtr
4.34m
5.41m
8m
10m
7.9 Lx
9.3 Lx
10 Lx
11 Lx
532 Lx
0.54m
1.08m
2.17m
3.26m
Height
1m
2m
4m
6m
133 Lx
33 Lx
15 Lx
Green
650 Lx
163 Lx
40 Lx
18 Lx
Red
Diam.
30.4°
Indalo Strip-18RGB Blue R+G+B
2.1 Lx
2.5 Lx
142 Lx
35 Lx
9 Lx
3.9 Lx
18 Lx
21 Lx
1208 Lx
302 Lx
75 Lx
33 Lx
Eavg Eavg Eavg Eavg
950 Lx 1160 Lx 253 Lx 2156 Lx
Emax Emax Emax Emax
238 Lx 290 Lx 63 Lx 539 Lx
59 Lx 72 Lx 16 Lx 134 Lx
26 Lx 32 Lx 6.9 Lx 59 Lx
15 Lx 18 Lx 3.9 Lx 33 Lx
5.3 Lx 6.5 Lx 1.4 Lx 12 Lx

230V AC
Indalo-Drive-4
Fixture-Line 4
DMX-Controller
IR-remote
or
USE ONLY WITH A 250V FUSE
DMX IN DMX OUT
POWER IN
LINE 1 LINE 3LINE 2 LINE 4
FUSE: T5A
230V AC
Indalo-Drive-4
USE ONLY WITH A 250V FUSE
DMX IN DMX OUT
POWER IN
LINE 1 LINE 3LINE 2 LINE 4
FUSE: T5A
Fixture-Line 3
Fixture-Line 2
Fixture-Line 1
DMX-Line to next
Indalo Drive
Each Indalo Fixture
contains 1 piece
3-way IP 67
serial RJ45 splitter
Each Indalo-Drive-4
contains 4 pcs
2-way IP 67
RJ45 connector
CMR CMX
Outdoor 4PR24
UTP cable
(CAT5E) 2x RJ45
UP
DOWN
ENTER
MENU 0000
Indalo Drive-4
Indalo wiring diagram
A9915022 Indalo-Drive-4
The Indalo-Drive-4 is used in conjunction with all Indalo products. The Indalo-Drive-4 provides 4 lines of
output with specially engineered drivers allowing for any number of LEDs to be connected with a
maximum of 36 LEDs per line. Simple connection with RJ45 connectors (also with available IP67
sleeves) mean that installation is quick-and-simple. Use the Indalo-Drive-4 for connecting the Indalo
Fixtures.
Input Voltage: 100-240VAC 50/60Hz
Output Lines: 4
• Always disconnect the mains of the LED driver before plugging or unplugging the LED`s !!
The LED`s will be damaged or destroyed because of the high voltage present on the driver output
when there is no load connected. Connect the main after all Led`s and plugs are connected !
33W 33W
33W
16.5W 16.5W
14W
16.5W 16.5W 16.5W 16.5W
14W 14W
A9915035 Play easy
DMX-controller
A9915030 Wireless
IP67 Transmitter
included 2x 3mtr. IP67 connection cables
A9915031 Wireless
IP67 Receiver
included 2x 3mtr. IP67 connection cables
DMX-Controller
or
3mtr 3mtr
IP20
3mtr 3mtr
XLR
XLR
male
XLR XLR
IP67 IP67
XLR XLR
IP67 IP67
A9920770
Connection cable
RJ45 to XLR male
cable-length:120cm
AC
IP67
XLR
IP20
RJ45-DMX-Line
pin-6: Data +
pin-7: Data -
pin-8: Gnd
DMX-out
to next Vigo drive
XLR
female
110-240V AC 110-240V AC
L
N
L
N
DMX

Mounting the UTP-cable with RJ45 into the IP66 straight connector
1 2
3
4
5
remove the red caps
10cm
Indalo Fixture
slide the red cap away from the RJ45 plug
connect the 3 RJ45 male connectors to the 3 female connectors inside the 2-way connector
Mounting the UTP-cable with RJ45 into the IP66 3-way serial connector
1 2
3
4
5
slide the red cap away from the RJ45 plug
connect the 3 RJ45 male connectors to the 3 female connectors inside the 3-way connector
remove the red caps
10cm