Artecta Trenton GU10 Track Light - 1 Phase User manual

Trenton GU10 Track Light –1 Phase
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Product code: A0320017 –Black housing
A0320018 –White housing
USER MANUAL
ENGLISH
V1

1
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
Preface
Thank you for purchasing this Artecta product.
The purpose of this user manual is to provide instructions for the correct and safe use of this product.
Keep the user manual for future reference as it is an integral part of the product. The user manual shall be
stored at an easily accessible location.
This user manual contains information concerning:
●Safety instructions
●Intended and non-intended use of the product
●Installation and operation of the product
●Maintenance procedures
●Troubleshooting
●Transport, storage and disposal of the product
Non-observance of the instructions in this user manual may result in serious injuries and damage of property.
Table of contents
1. Introduction..........................................................................................................................................................2
Before Using the Product ..................................................................................................................................2
Intended Use .......................................................................................................................................................2
Text Conventions ................................................................................................................................................2
Symbols and Signal Words................................................................................................................................3
Symbols on the Information Label ..................................................................................................................3
2. Safety ....................................................................................................................................................................3
Warnings and Safety Instructions ....................................................................................................................3
Requirements for the User.................................................................................................................................4
3. Description of the Device...................................................................................................................................5
Front View and Dimensions ..............................................................................................................................5
Product Specifications ......................................................................................................................................5
4. Installation and Deinstallation ...........................................................................................................................6
Safety Instructions...............................................................................................................................................6
Personal Protective Equipment .......................................................................................................................6
Installation Site Requirements ..........................................................................................................................6
Lamp Installation ................................................................................................................................................6
Mounting..............................................................................................................................................................7
Dismounting.........................................................................................................................................................8
Direction Adjustment .........................................................................................................................................9
Connecting to Power Supply...........................................................................................................................9
5. Troubleshooting ...................................................................................................................................................9
6. Maintenance .....................................................................................................................................................10
Preventive Maintenance................................................................................................................................10
Basic Cleaning Instructions .......................................................................................................................10
Corrective Maintenance................................................................................................................................10
7. Transportation and Storage..............................................................................................................................10
Instructions for Transportation ........................................................................................................................10
Storage...............................................................................................................................................................10
8. Disposal ................................................................................................................................................................0
9. Approval...............................................................................................................................................................0

2
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
1. Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or servicing this
product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite
International dealer.
Your shipment includes:
●Artecta Trenton GU10 Track Light –1 Phase (including track
adapter, not including light source)
●Suction cup
●User manual
Fig. 01
Intended Use
This device is intended for use as a light spot. It is suitable for indoor installation in commercial and residential
buildings. It is compatible with GU10 light bulbs.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Text Conventions
Throughout the user manual the following text conventions are used:
●References: References to chapters and parts of the device are in bold lettering, for example:
“Refer to 2. Safety”, “turn the adjustment handle (05)”
●Notes: Note: (in bold lettering) is followed by useful information or tips

3
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
Symbols and Signal Words
Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
Attention
Indicates important information for the correct operation and use of the product.
Important
Read and observe the instructions in this document.
Provides important information about the disposal of this product.
Symbols on the Information Label
This product is provided with an information label. The information label is located on the mounting bracket.
The information label contains the following symbols:
This device is designed for indoor use.
This device shall not be treated as household waste.
2. Safety
Important
Read and follow the instructions in this user manual before installing, operating or servicing this
product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual.
Warnings and Safety Instructions
DANGER
Danger for children
For adult use only. The device must be installed beyond the reach of children.
●Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within children’s
reach. Packaging material is a potential source of danger for children.

4
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
Attention
Power supply
Attention
General safety
Before connecting the device to the power supply,
make sure that the current, voltage and frequency
match the input voltage, current and frequency
specified on the information label on the device.
●Do not shake the device. Avoid brute force
when installing or operating the device.
●If the device fails to work properly, discontinue
the use immediately.
Attention
This device shall be used only for the purposes it is designed for.
This device is intended for use as a light spot. It is suitable for indoor installation in commercial and residential
buildings. It is compatible with GU10 light bulbs.
This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the
warranty void. Such modifications may result in injuries and material damage.
Attention
Before use, examine the device visually for any defects.
Attention
Do not expose the device to conditions that exceed the rated IP class conditions.
This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater than
12 mm, such as fingers, and no protection against harmful ingress of water.
Requirements for the User
This product may be used by ordinary persons. Maintenance may be carried by ordinary persons. Installation
and service shall be carried out only by instructed or skilled persons. Contact your Highlite dealer for more
information.
Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled person,
for specific tasks and work activities associated with the installation, service and maintenance of this product,
so that they can identify risks and take precautions to avoid them.
Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards
associated with the installation, service and maintenance of this product.
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not
only users of the product but also any other persons that may have access to the device or who may be in the
vicinity of the device.

5
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
3. Description of the Device
The Artecta Trenton GU10 Track Light –1 Phase features a GU10 socket. It can be fitted with any GU10 LED or
halogen light bulb of up to 50 W. It Is suitable for illumination of residential and commercial buildings.
The device is equipped with a 1-phase track adapter. The 1-phase track adapter is compatible with the
Artecta 1-phase track systems and with the most 1-phase tracks available on the market.
Front View and Dimensions
Fig. 02
Fig. 03
01) Track adapter
02) Pivot connector
03) Track head
04) Lamp holder (GU10)
05) Power switch (ON/OFF)
06) Track lock
Product Specifications
Model:
Trenton GU10 Track Light –1 Phase
Movement:
Track adapter:
Tilt range:
0–90°
Power connection:
Specs online: 220–240 V
AC, 6 A/250 V
Turning range:
0–350°
F max:
50 N
Phases:
1
Optics:
Construction:
Light source:
Not included
IP rating:
IP20
Lamp holder:
GU10
Housing:
Aluminum
Compatibility:
LED/halogen light bulb,
max. 50 W
Color:
A0320017 –Black
A0320018 –White
Finish:
Powder coated
Physical:
Dimensions:
125 x 60 x 78 mm (L x W x H) (with the track adapter)
Weight:
0,25 kg (with the track adapter, without a light bulb)
Thermal:
Maximum ambient temperature ta:
40 °C
Minimum ambient temperature:
-20 °C
Minimum distance:
Minimum distance from flammable surfaces:
0,5 m
Minimum distance to lighted object:
0,5 m

6
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
4. Installation and Deinstallation
Safety Instructions
WARNING
Incorrect installation and deinstallation can cause serious injuries and damage of property.
Installation and deinstallation of the device must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning electrical installations in
buildings and working at heights.
Before installing or deinstalling the device make sure that the track system is disconnected from power supply.
Personal Protective Equipment
During installation and deinstallation wear personal protective equipment in compliance with the national and
site-specific regulations.
Installation Site Requirements
●The device can be used only indoors.
●The device can be mounted only to a 1-phase track system.
●The minimum distance to other objects must be bigger than 0,5 m.
●The maximum ambient temperature ta= 40 °C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Lamp Installation
The Trenton GU10 Track Light –1 Phase is delivered without the light source. It can be used with LED or halogen
bulbs with a GU10 lamp cap.
Attention
Install the light bulb before mounting
the device to the track.
CAUTION
Disconnect the track system from the
power supply when changing the
light bulb.
To install the light bulb, follow the steps below:
01) Attach the delivered suction cup to the light bulb (see Fig. 04).
02) Insert the light bulb into the lamp holder (04) and twist it clockwise until it fits into place (see Fig. 05).
Fig. 04
Fig. 05
03) Remove the suction cup from the light bulb.

7
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
Mounting
The device can be mounted only to a 1-phase track system.
CAUTION
Restrict the access under the work area during mounting.
To mount the device, follow the steps below:
01) Disconnect the track system from the power supply.
02) Make sure that the power switch (05) is in OFF position and the track lock (06) is in unlocked position, as
shown in Fig. 06.
Fig. 06
03) Insert the track adapter (01) into the track and push it until it snaps into place.
04) Move the track lock (06) to lock the device in the track, as shown in Fig. 08.
Fig. 07
Fig. 08

8
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
05) Select ON with the power switch (05) as shown in Fig. 09.
Attention
Do not slide the track adapter in the track to adjust the position of the device (see Fig. 10).
This can damage the connectors.
Fig. 09
Fig. 10
Remove the device from the track and install it at a new place. For more information on how to remove the
device from the track, refer to 4.6. Dismounting on page 8.
Dismounting
CAUTION
Restrict the access under the work area during dismounting.
To dismount the device, follow the steps below:
01) Disconnect the track system from the power
supply.
02) Let the device cool down before dismounting.
03) Set the power switch (05) to OFF position, as
shown in Fig. 11.
04) Turn the track lock (06) counterclockwise to
unlock the device (see Fig. 12).
05) Pull the track adapter (01) from the track (see
Fig. 13).
Fig. 11
Fig. 12
Fig. 13

9
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
Direction Adjustment
To adjust the angle of the device and the direction of the beam:
●Move the track head (03) around the pivot connector (02) to adjust the vertical position of the track
head (03). The adjustment range is 0–90°.
●Turn the track head (03) around the pivot connector (02) to adjust the horizontal position of the track
head (03). The adjustment range is 0–350°.
Fig. 14
Connecting to Power Supply
This device is suitable for mounting only to a 1-phase track system. The device is connected to power supply
when it is mounted to the track system.
Before installing, deinstalling or servicing the device make sure that the track system is disconnected from
power supply.
5. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The
device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries
and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the solution is
not described in the table.
Problem
Probable cause(s)
Solution
The device does not
function
No power to the device
●Check if the track system is connected to
the power supply
No light or light cuts out
intermittently
The light bulb is defect or broken
●Change the light bulb
The power supply settings do not
match local AC voltage and
frequency
●Disconnect the device. Check the
settings and correct, if necessary

10
Trenton GU10 Track Light –1 Phase
Product code: A0320017 / A0320018
6. Maintenance
Preventive Maintenance
Attention
Before use, examine the device visually for any defects.
Basic Cleaning Instructions
To clean the device, follow the steps below:
Disconnect the device from the electrical power supply.
Allow the device to cool down for at least 15 minutes.
03) Remove the dust collected on the external surface with dry compressed air and a soft brush.
Attention
Do not immerse the device in liquid.
Do not use alcohol or solvents.
Corrective Maintenance
The device does not contain user-serviceable parts. Do not open the device and do not modify the device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more
information.
7. Transportation and Storage
Instructions for Transportation
●Use the original packaging to transport the device, if possible.
●Always observe the handling instructions printed on the outer carton box, for example: “Handle with
care”, “This side up”, “Fragile”.
Storage
●Clean the device before storing. Follow the cleaning instructions in chapter 6.1.1. Basic Cleaning
Instructions on page 10.
●Store the device in the original packaging, if possible.

8. Disposal
Correct disposal of this product
Waste Electrical and Electronic Equipment
This symbol on the product, its packaging or documents indicates that the product shall
not be treated as household waste. Dispose of this product by handing it to the respective
collection point for recycling of electrical and electronic equipment. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal. For more
detailed information about recycling of this product contact the local authorities or the
authorized dealer.
9. Approval
Check the respective product page on the website of Highlite International (www.highlite.com)
for an available declaration of conformity.
©2022 Artecta. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written consent
of Highlite International.
Design and product specifications are subject to change without prior notice.
For the latest version of this document or other language versions, please visit our website www.highlite.com or
contact us at [e-mail].
Highlite International and its authorized service providers are not liable for any injury, damage, direct or indirect
loss, consequential or economic loss or any other loss arising from the use of, or inability to use or reliance on
the information contained in this document.
©2022 Artecta