ASC SP007 User manual

1
SP007 Solar Water Pump Kit (No Battery Version)
Instructions
By All Solar Central
www allsolarcentral com
Thank you from the entire ASC family for purchasing an ASC solar
product! Please read this entire booklet before assembly
Package contents:
1 x Water Pump
1 x Solar Panel
1 x Set of Fountain Nozzles
1 x Solar Panel Bracket
2 x Extension Tube
1 x Ground Spike
Notes: If there is any damage to the product or missing parts, please contact us at 1-626-582-8898 or
www allsolarcentral com/contactus
Assembly Steps:
1 Connect the bracket, tubes and
spike together Then attach the
solar panel to the bracket Slide the
holding bracket into the inside lip of
the top half of the solar panel
frame The bracket holds the
weight of the solar panel The solar
panel can be adjusted for optimal
sunlight by using the wingnut
Please see the diagram

2
1 Insert the spike into the ground Position the solar panel so it’s facing south (in northern
hemisphere) as much as possible to maximize daylight hours It is important to angle the solar
panel to face the sun when the sun is at its highest point Ensure the solar panel is not shaded by
trees, shrubs or buildings
2 Twisting the pump plug slightly, sliding it into the [pump] socket Make sure its sealing ring is
fully in the groove Your solar pump is now ready to use It will begin working once the panel is
in direct sunlight
3. SOLAR PUMP FUNCTIONS
This pump runs from direct sunlight The pumps performance is directly related to the amount
and strength of sunlight received by the solar panel This solar pump is designed primarily to
operate in summer months but can also work in spring and autumn if there is direct sunlight

3
Notes: This model OES NOT come with a battery, so the pump will only work when the solar
panel is in sunlight.
4. PUMP MAINTENANCE
If you find the pump starts losing power or stops working, please clean the pump filter and
impeller with clean water
5. TROUBLE SHOOTING
•Check to see if the solar panel and pump are connected properly
•Check to see if the solar panel is correctly positioned facing the sun Please ensure the
solar panel is not in the shade or obstructed by trees, shrubs or a building
•Check water level and make sure the pump is fully submerged in water
•Check to see if the pump impeller is blocked by debris
•Check to see if the fountain tubing is blocked by kinks or obstructions
•Check the pump It may be “air locked” Turn the pump on/off switch several times to
clear any air that may have been trapped
6. TECHANICAL ATA
•Max Water Flow: 500LPH
•Max Water Lift: 140CM
•Working Voltage: DC12V – DC15V
•Pump Working Power: 2 75W – 4 4W
•Protection Grade of Pump: IP68
•Solar Panel: 5 0W; 15V; 0 333A
•Solar Panel Size: 270x235x18mm
•Protection Grade of Panel: IP44

4
7. WINTER PROTECTION
Indoor storage is recommended during winter months Normal operating temperature is
between 50 and 113 °F
Please visit www allsolarcentral com for more products and offers