Ashton AWM400 User manual

USER MANUAL
AWM400_outlines.indd 2 19/4/08 2:50:24 AM

AWM400_outlines.indd 3 19/4/08 2:50:25 AM

CONTENTS:
INTRODUCTION 1
FEATURES 1
PACK CONTENTS 2
QUICK SETUP 3
RECEIVER DESCRIPTION: FRONT PANEL 4
RECEIVER DESCRIPTION: REAR PANEL 5
RECEIVER SETTING AND FUNCTIONS 6
CHANNEL MATCHING SYSTEM 6
BP300 DESCRIPTIONS/USE 7
HT300 DESCRIPTIONS/USE 8
BASIC CONNECTION SET-UP 9
MULTIPLE SET-UPS 10
SAFETY INFORMATION 11
AWM400_outlines.indd 4 19/4/08 2:50:25 AM

INTRODUCTION:
Ashton is designed in Australia by a team of industry experts that have years of experience
in the development, design and production of musical instruments and equipment. Ashton’s
range of products are a result of years of development and careful testing. Every Ashton
product is designed with value in mind and features the highest quality materials available.
We highly recommend that you read and understand the information in this manual before
beginning use.
Enjoy,
The Ashton Team
AWM400_outlines.indd 5 19/4/08 2:50:26 AM

123
AWM400_outlines.indd 6 19/4/08 2:50:30 AM

AWM400_outlines.indd 7 19/4/08 2:50:31 AM

AWM400_outlines.indd 8 19/4/08 2:50:39 AM

- Page 5 -
RECEIVER DESCRIPTION: REAR PANEL
A. Antenna Inputs: Plug your antennas into these inputs.
B/C/D/E. Channel Output Jacks: XLR balanced jacks for direct outputs. Outputs correspond
to the relevant receiver compartment panels on the front panel.
F. 4 in 1 Mix Output: XLR balanced -12dBV. 4 in 1 mix stereo output.
G. Unbalanced ¼” Output: 4 in 1 mix unbalanced (mono) output ¼” jack.
H. Power Adapter Jack: Power input for AWM400 unit. The power adapter required is a
D.C 12-18V IN 800mA.
AWM400_outlines.indd 9 19/4/08 2:50:41 AM

AWM400_outlines.indd 10 19/4/08 2:50:42 AM

G
Open
Close
SE
AWM400_outlines.indd 11 19/4/08 2:50:45 AM