Asko WM60 User manual

Type: WM60
Service manual
Contents
Updates ........................................................................................................................................................2
Introduction...................................................................................................................................................3
Product overview ..........................................................................................................................................4
Program WM60.3..........................................................................................................................................5
Program WM60.2..........................................................................................................................................7
Program selection, options and making settings WM60.3 ............................................................................9
Program selection ........................................................................................................................................9
Selecting Options WM60.3 ........................................................................................................................11
Making setting WM60.3 ..............................................................................................................................13
Service menu WM60.3 ...............................................................................................................................16
Program selection WM60.2 ........................................................................................................................17
Selecting Options WM60.2 .........................................................................................................................17
Selecting Options WM60.2 .........................................................................................................................19
Service menu WM60.3 ...............................................................................................................................20
Service menu WM60.2 ...............................................................................................................................23
Shop program WM60.3...............................................................................................................................24
Fault indications WM60.3 ...........................................................................................................................25
Fault indications WM60.2 ...........................................................................................................................27
Components and measurement values ......................................................................................................28
Measurement values thermistor..................................................................................................................28
Technical data ............................................................................................................................................29
Tools...........................................................................................................................................................29
Wiring diagram WM60.3 .............................................................................................................................30
Wiring diagram WM60.2 .............................................................................................................................31
Rehanging the door ....................................................................................................................................32
Replacing panels and detergent compartment ...........................................................................................35
Replacing front panel, door, cover plate and the hinges .............................................................................37
How to use the emergency opener for door lock.........................................................................................38
This service manual describes washing machine type WM60 and is a supplement to the general service
manual for the 600 series.

Service manual WM60
2
Updates
Revi-
sion
Date Description Signa-
ture
03 2007-11-27 Updated the ”Show room program” /In-store demonstration programwith a
description for machines manufactured week 737 and later.
BPA
04 2007-10-11 Updated with WM60.2. WM60.3 added Stain program MW

Service manual WM60
3
Introduction
You are holding the service manual for WM60 type washing machines.
It should be easy to service a washing machine. It is important that you, as a service technician, are given
the conditions to be able to carry out work in an efficient and satisfactory way. Our hope is that this service
manual is a useful tool for your daily work.
The type designation is located by the inside of the glass door (see image below).
Type designation
Product number Serial numberYear Week

Service manual WM60
4
Product overview
WM60.3
Programs: 14, where one consists of the menu for settings (Program 14)
Options: 6
Settings: 8
WM60.3 (Integrated)
J1
S1 S3LCD LCD LCD
S2
S1
S4
S5
S3
S2
Programs: 14, where one consists of the menu for settings (Program 14)
Options: 6
Settings: 8
Programs: 12
Options: 1 or 5
Settings: 3
WM60.2

Service manual WM60
5
Program 5 rinsesrinses
Pre-
wash
Main
wash
Tempe-
rature
°C
Tempe-
rature
°F
Max
speed
(rpm)
Max
load
Rinses
(number)
Water
consumption
(approx.
litres)
Energy
consumption
(approx.
kWh)
Program
time
(approx.
min)
Program 1 60 140 1/1
Program 2 60 140 1/1
Program 3 X long
long
95
60
203
140
1600
1600
1/1
1/1
5
5
80
62
2,1
1,0
160
150
Program 4* long 60 140 1800 1/1 5 < 69 1,02 145
Program 5 short 60 140 1600 1/2 5 56 0,9 100
Program 6 short 40 104 1600 1/2 5 56 0,5 80
Program 7 short 40 104 1600 1/2 3 35 0,4 50
Program 8 short 40 104 800 1/2 4 40 0,4 80
Program 9 short 30 86 800 1/3 3 80 0,5 45
Program 10 short 30 86 800 1/3 3 80 0,5 45
Program 11 1600 1/2 1 15 0,1 20
Program 12 1600 1/2 0,1 15
Program 13 1
Program 14 Settings
Program 3 rinses
Pre-
wash
Main
wash
Tempe-
rature
°C
Tempe-
rature
°F
Max
speed
(rpm)
Max
last
Rinses
(number)
Water
consumption
(approx.
litres)
Energy
consumption
(approx.
kWh)
Program
time
(approx.
min)
Program 1 60 140 1/1
Program 2 60 140 1/1
Program 3 X long
long
95
60
203
140
1600
1600
1/1
1/1
5
5
80
62
2,1
1,0
160
150
Program 4* long 60 140 1800 1/1 3 < 54 1,02 135
Program 5 short 60 140 1600 1/2 3 35 0,8 80
Program 6 short 40 104 1600 1/2 3 37 0,4 70
Program 7 short 40 104 1600 1/2 3 35 0,4 50
Program 8 short 40 104 800 1/2 4 40 0,4 80
Program 9 short 30 86 800 1/3 3 80 0,5 45
Program 10 short 30 86 800 1/3 3 80 0,5 45
Program 11 1600 1/2 1 15 0,1 20
Program 12 1600 1/2 0,1 15
Program 13 1
Program 14 Settings
Program is tested in accordance with SS-EN 60456/A13.
Program is tested in accordance with SS-EN 60456/A13.
Program WM60.3

Service manual WM60
6
Program 5 rinses �ith Stain programrinses �ith Stain program
Pre-
wash
Main
wash
Tempe-
rature
°C
Tempe-
rature
°F
Max
speed
(rpm)
Max
load
Rinses
(number)
Water
consumption
(approx.
litres)
Energy
consumption
(approx.
kWh)
Program
time
(approx.
min)
Program 1 60 140 1/1
Program 2
Program 3 60 140 1/1
Program 4 X long
long
95
60
203
140
1600
1600
1/1
1/1
5
5
80
62
2,1
1,0
160
150
Program 5* long 60 140 1800 1/1 5 < 69 1,02 145
Program 6 short 60 140 1600 1/2 5 56 0,9 100
Program 7 short 40 104 1600 1/2 5 56 0,5 80
Program 8 short 40 104 1600 1/2 3 35 0,4 50
Program 9 short 40 104 800 1/2 4 40 0,4 80
Program 10 short 30 86 800 1/3 3 80 0,5 45
Program 11 short 30 86 800 1/3 3 80 0,5 45
Program 12 1600 1/2 1 15 0,1 20
Program 13 1600 1/2 0,1 15
Program 14 1
Program 15 Settings
Program 3 rinses �ith Stain program
Pre-
wash
Main
wash
Tempe-
rature
°C
Tempe-
rature
°F
Max
speed
(rpm)
Max
last
Rinses
(number)
Water
consumption
(approx.
litres)
Energy
consumption
(approx.
kWh)
Program
time
(approx.
min)
Program 1 60 140 1/1
Program 2
Program 3 60 140 1/1
Program 4 X long
long
95
60
203
140
1600
1600
1/1
1/1
5
5
80
62
2,1
1,0
160
150
Program 5* long 60 140 1800 1/1 3 < 54 1,02 135
Program 6 short 60 140 1600 1/2 3 35 0,8 80
Program 7 short 40 104 1600 1/2 3 37 0,4 70
Program 8 short 40 104 1600 1/2 3 35 0,4 50
Program 9 short 40 104 800 1/2 4 40 0,4 80
Program 10 short 30 86 800 1/3 3 80 0,5 45
Program 11 short 30 86 800 1/3 3 80 0,5 45
Program 12 1600 1/2 1 15 0,1 20
Program 13 1600 1/2 0,1 15
Program 14 1
Program 15 Settings
Program is tested in accordance with SS-EN 60456/A13.
Program is tested in accordance with SS-EN 60456/A13.

Service manual WM60
7
Program 5 rinses
Pre-
wash
Main
wash
Tem-
pe-ra-
ture
°C
Tem-
pe-ra-
ture
°F
Max
speed
(rpm)
Max
load
Rinses
(number)
Water
consumption
(approx.
litres)
Energy
consumption
(approx.
kWh)
Program
time
(approx.
min)
Program 1 60 140 1/1
Program 2 60 140 1/1
Program 3 X long
long
95
60
203
140
1600
1600
1/1
1/1
5
5
80
62
2,1
1,0
160
150
Program 4* long 60 140 1800 1/1 5 < 69 1,02 145
Program 5 short 60 140 1600 1/2 5 56 0,9 100
Program 6 short 40 104 1600 1/2 5 56 0,5 80
Program 7 short 40 104 1600 1/2 3 35 0,4 50
Program 8 short 40 104 800 1/2 4 40 0,4 80
Program 9 short 30 86 800 1/3 3 80 0,5 45
Program 10 short 30 86 800 1/3 3 80 0,5 45
Program 11 1600 1/2 1 15 0,1 20
Program 12 1600 1/2 0,1 15
Program 13 1
Program WM60.2
Program 3 rinses
Pre-
wash
Main
wash
Tem-
pe-ra-
ture
°C
Tem-
pe-ra-
ture
°F
Max
speed
(rpm)
Max
load
Rinses
(number)
Water
consumption
(approx.
litres)
Energy
consumption
(approx. kWh)
Program
time
(approx.
min)
Program 1 60 1/1
Program 2 60 1/1
Program 3 X long
long
95
60
1600
1600
1/1
1/1
5
5
80
62
2,1
1,0
160
150
Program 4* long 60 1800 1/1 3 < 54 1,02 135
Program 5 short 60 1600 1/2 3 35 0,8 80
Program 6 short 40 1600 1/2 3 37 0,4 70
Program 7 short 40 1600 1/2 3 35 0,4 50
Program 8 short 40 800 1/2 4 40 0,4 80
Program 9 short 30 800 1/3 3 80 0,5 45
Program 10 short 30 800 1/3 3 80 0,5 45
Program 11 1600 1/2 1 15 0,1 20
Program 12 1600 1/2 0,1 15
Program 13 1
Program is tested in accordance with SS-EN 60456/A13.
Program is tested in accordance with SS-EN 60456/A13.

Service manual WM60
8
Program Type
AU US WM60.3 WM60.3
from 826
WM60.2 WM60.1
(tbd)
Auto Auto X X X
Stain prog Stain Care X choice
Time program Time Choice X X X
Heavy Sani X X X
Normal Stain X X X
White White X X X
Colour Color X X X
Quick Quick X X X
Synthetics PermaPress X X X
Wool Wool X X
Hand Delicate / Hand X X
Wool/hand wash Wool/hand wash X
Rinse Rinse X X X
Spin Spin X X X
Drain Drain X X X

Service manual WM60
9
95°C
80°C
70°C
50°C
40°C
30°C
Cold
2000
*
1900
*
1700
1600
1400
1200
1000
800
400
1.
2.
3.
4.
6.
8.
7.
9.
10.
11.
12.
13.
14.
5. 10.20 09.20 60°C
1800
9
5°
C
8
0°
C
7
0°C
5
0°
C
4
0°
C
3
0°
C
C
o
l
d
2
00
0
*
1900
*
1700
1
600
1
40
0
1200
1000
8
0
0
4
00
5
.
6
0°
C
1800
Program selector button for integrated mach-
ines
1
2
21. Press the program selector button to navigate
between the different menus (e.g. to go from
temperature menu to spin menu).
2. Press the small arrows to make a selection in
the menus (e.g. select 1400 rpm). Confirm the
selection and go to the next menu by pressing the
program selector button.
3. Press Start/Stop to start. Hold Start/Stop in for 3
seconds to exit the current program.
Super rinse
Normal rinse
Economy rinse
Delayed Start Clock
Finish time
High water level
Normal water level Start/Stop
Door opening
Program selector
1
221. Press the program selector button to navigate
between the different menus (e.g. to go from
temperature menu to spin menu).
2. Turn the program selector button to make a
selection in the menus (e.g. select 1400 rpm).
Confirm the selection and go to the next menu by
pressing the program selector button.
3. Press Start/Stop to start. Hold Start/Stop in for 3
seconds to exit the current program.
Program selection, options and making settings WM60.3
Press/
turn Pos. LCD 1 Comments/instructions
Turn on the main power supply
Program selection
Program 1
Program 2
Program 3
Program 4
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
Program 13
Program 14
Program 5
The programs are displayed in the order they occur in LCD1. All display text language versions are displayed.

Service manual WM60
10
1
Auto, Auto, Auto, Automatprogram, Autovask,
Autovask, Automaattipesu, Automatique,
Automatikprogramm, Automatico, Auto,
Aвтoмaтичeскaя, Automatisch programma
This program automatically adjusts the length of the main wash
and the number of rinses depending on the amount of washing
and how heavily soiled it is.
2
Stain Care, Stain prog, Fläckprogram, Plet
program, Flekkprogram, Tahraohjelma, Tache,
Flecken-Progr., Prog Antimacchia, Manchas,
Пятна, Vlekkenprog.
A special program for stains.
Stain removal requires attentioan as soon as possible.
3
Time program, Time Choice, Time program,
Tidsprogram, Tidsprogram, Tidsprogram,
Aikaohjelma, Program minute, Zeitprogramm,
Progr. del tempo , Prog. de secado, Bрeмя
oкoнчaния, Tijdprogramma
Choose a temperature up to 60°C/ 140 °F, set the spin speed
to a maximum of 1600 rpm and set the time when you want
the program to finish. The machine will automatically choose a
program of the right length with the settings you have selected.
4
Heavy, Sani, Heavy, Grov- med förtvätt,
Kogevask+forvask, Intensiv m/forvask, Esipesu
+ Tehopesu, Super intensif, Vor-/Kochwäsche,
Intensivo, Sani, Интeнсивнaя, Intensieve was
Use this program for heavily-soiled washing. You only need to
use the maximum temperature, 60°C/ 140 °F, if the washing is
very heavily soiled.
5
Normal, Stain, Normal, Vittvätt, Hvidvask,
Intensiv, Tehopesu, Super intensif blanc,
Intensiv, Intensivo bianchi, Manchas-Color,
Hoрмaльнaя, Normale was
This program is equivalent to the Heavy program, but without the
pre-wash. It is used for heavily-soiled whites where 95°C/ 203 °F
is a suitable temperature.
6
White, White, White, Snabb vittvätt, Hurtig
hvidvask, Hvit, Normaalipesu, Intensif,
Kochwäsche, Capi resistenti, Pesado, Бeлoe,
Witte was
Normally-soiled sheets, pillowcases and towels will come clean
at 60 °C/140 °F.
7
Colour, Color, Colour, Kulörtvätt, Kulørt
vask, Kulør, Päivittäispesu, Blanc/couleurs,
Buntwäsche, Bianchi/colorati, Normal Plus,
Цвeтнoe, Bonte was
Clothes worn next to the skin should be washed at 60°C/ 140
°F. Lightly-soiled laundry can be washed at 40°C. Most modern
detergents are effective even at 40°C.
8
Quick, Quick, Quick, Kvicktvätt, Kvikvask,
Hurtig, Pikapesu, Rapide, Schnell, Rapido,
Rápido, Быстрaя стиркa, Kort programma
Lightly soiled laundry that only needs freshening up can be
washed for a short time at 40°C.
9
Synthetics, PermaPress, Synthetics,
Syntettvätt, Syntetisk vask, Syntet, Siliävät/
Synteettiset, Synthétique, Pflegeleicht/
Fein, Sintetici, Perma Press, Синтeтикa,
Synthetische was
This program is suitable for shirts and blouses made of synthetic
and blended material. Wash white items at 60°C/ 140 °F and
coloured items at 40°C/ 104 °F.
10
Wool, Wool, Wool, Ylletvätt, Uldvask, Ull,
Villapesu, Laine, Wolle, Lana, Lavado manual/
Lana, Шeрсть, Wolwas
This program is used for garments labelled for Wool wash only.
The maximum temperature is 40°C/ 104 °F and the program has
a short spin.
11
Hand, Delicate / Hand, Hand, Handtvätt,
Håndvask, Hånd, Käsinpesu, Main, Hand,
A mano/delicati, Delicado, Pучнaя стиркa,
Handwas
This program is used for garments labelled hand wash only. The
maximum temperature is 30°C/ 86 °F and the program has a
short spin.
12
Rinse, Rinse, Rinse, Sköljprogram,
Skylleprogram, Skylling, Huuhteluohjelma,
Rinçage, Spülen, Risciacquo, Enjuague,
Пoлoскaниe, Spoelprogramma
This program performs one rinse cycle + spin. Good for cleaning
cloths and mops.
13
Spin, Spin, Spin, Centrifugering, Centrifugering,
Sentrifugering, Linkous, Essorage,
Schleudern, Centrifuga, Centrifugado, Oтжим,
Centrifugeren
To be used when you only want to spin the load.
14
Drain, Drain, Drain, Utpumpning, Udpumpning,
Utpumping, Tyhjennys, vidange, Abpumpen,
Scarico, Drenaje, Слив, Pompen
To be used when you only want to drain the water from the
machine.
15
Settings, Settings, Settings, Inställningar,
Indstillinger, Innstillinger, Asetukset, Réglage,
Einstellungen, Impostazioni, Ajustes,
Haстрoйки, Instellingen
See chapter “Settings”.
Exits the program menu and advances to options or the menu
for Settings.

Service manual WM60
11
Press/
turn LCD 2 Comments/instructions
95°C, 205 °F Temperature
Selection of temperatures between Cold and 95°C. Cold is the
same as the incoming water temperature. For program 8 and 9,
the maximum temperature is 40°C, for program 10, the maximum
temperature is 60°C.
80°C, 175 °F
70°C, 160 °F
60°C, 140 °F
50°C, 120 °F
40°C, 105 °F
30°C, 85 °F
Cold, Cold, Cold, Kalt, Kold, Kald, Kylmä, Froid,
Kallt, Freddo, Fría, Дoп.пoлoскaниe, Koud
2000 Spin
Option of choosing spin speed between 400 and 2000 rpm. Spinning
at 400 – 800 rpm signifies a short spin.
Program 8, 9 and 10 cannot be selected at speeds greater than 800
rpm. Program 2 has a maximum speed of 1600 rpm.
Maximum rpm is either 1800 or 2000 rpm depending on model.
1900
1800
1700
1600
1400
1200
1000
8000
4000
“No spin” means that the program does not include a spin cycle and
ends by draining.
“No draining” means that the program does not include a spin cycle
and ends with the water from the final rinse still in the machine.
Selecting Options WM60.3
The options are displayed in the order they occur in LCD2. All display text language versions are displayed.

Service manual WM60
12
Economy Rinse, Economy Rinse,
Economy Rinse, Lätt sköljning,
Økonomi skyl, Økonomi skylling,
Ekohuuhtelut, Rinçage économique,
Eco Spülen, Risciacquo economico,
Enjuague económico, Hoрм.
пoлoскaниe, Eco spoelen
Rinse
The rinse program can be selected in program: 3, 4, 5, 6, 7, 8, 9 and
10
- Economy rinse (reduces the number of rinses, used for lightly soiled
laundry)
- Normal rinse (recommended number of rinses during normal soiled
laundry.)
- Super rinse (adds rinses, maximum 7)
Number of rinses varies depending on program.
Normal Rinse, Normal Rinse, Normal
Rinse, Normal sköljning, Normalt skyl,
, Normaalihuuhtelut, Rinçage normal,
Normal Spülen, Risciacquo normale,
Enjuague normal, Hoрм.пoлoскaниe,
Normaal spoelen
Super Rinse, Super Rinse, Super
Rinse, Supersköljning, Superskyl,
Superskyll, Superhuuhtelut,
Super rinçage, Super Spülen,
Risciacquo super, Superenjuague,
Супeрпoлoскaниe, Super spoelen
Normal water level, Normal Water
Level, Normal water level, Normal
vattennivå, Normal vandstand, Normalt
vannivå, Normaali vedenpinta, Niveau
d’eau normal, Normaler Wasserstand,
Livello acqua normale, Nivel normal de
agua, Hoрм.урoвeнь вoды, Normaal
waterniveau
High water level
Can be selected in programs: 3, 4, 5, 6, 7 and 8. Cannot be selected
during No spin and No draining.
With this option selected, extra water is taken in after approximately
15 minutes, the extra water is used in the main wash and rinses.
High water level, High Water Level,
High water level, Hög vattennivå, Høj
vandstand, Høyt vannivå, Korkea
vedenpinta, Niveau d’eau élevé, Hoher
Wasserstand, Livello acqua alto, Nivel
alto de agua, Bысoкий урoвeнь вoды,
Hoog waterniveau
Start, Start, Start, Start, Start, Start,
Start, Démarrer, Start, Avvio, Inicio,
Стaрт, Start
Delayed start (when setting: ”No Real time”)
The start of the selected program can be delayed for up to 24 hours
(in half an hour intervals). The delay and program time is shown in
the display.
Start - Done, Start-End, Start-Done,
Start-Klar, Start-Færdig, Start-Ferdig,
Start-Valmis, Démarrer-Fin, Start-
Fertig, Avvio-Fine, Inicio-Fin, Стaрт-
Кoнeц, Start-Gereed
Delayed start (when setting: ”24 Hour Clock ” or ”12 Hour Clock”)
The start of the selected program can be delayed for up to 24 hours
(in half an hour intervals). Start and end times are shown in the
display.
Start, Start, Start, Start, Start, Start,
Start, Démarrer, Start, Avvio, Inicio,
Стaрт, Start
Time program (when setting: ”No Real time”)
Desired program time can be set. Selections up to 3 hours in units of
15 minutes can be made. The selected program time is shown in the
display.
3:00
Start - Done, Start-End, Start-Done,
Start-Klar, Start-Færdig, Start-Ferdig,
Start-Valmis, Démarrer-Fin, Start-
Fertig, Avvio-Fine, Inicio-Fin, Стaрт-
Кoнeц, Start-Gereed
Time program (when setting: ”24 Hour Clock ” or ”12 Hour Clock””)
Desired program time can be set. Selections up to 3 hours in units
of 15 minutes can be made. Start and end times are shown in the
display.

Service manual WM60
13
Press/
turn
LCD 2 Press/
turn
LCD3 Comments/instruc-
tions
Settings, Settings, Settings,
Inställningar, Indstillinger,
Innstillinger, Asetukset,
Réglage, Einstellungen,
Impostazioni, Ajustes,
Haстрoйки, Instellingen
In the program menu: Scroll to
Program 14 (Settings)
Program 14 is shown in LCD1.
You will now enter the Settings menu.
Presoak, Presoak, Presoak,
Förblötning , Iblødsætning,
Bløtlegging , Liotus,
Trempage, Einweichen,
Ammollo, Remojar,
Зaмaчивaниe, Inweken
On, On, On, På, Til, På, Päällä, On, An,
On, encendido, Bкл., Aan
The laundry will soak in cold
water for two hours before the
program starts.
Off, Off, Off, Av, Fra, Av, Poissa, Off, Aus,
Off, apagado, Bыкл., Uit
Setting deactivated.
Saves the setting and returns to the program menu, Program 14.
Anti crease, Anti Wrinkle, Anti
crease, Skrynkelfritt, Anti-krøl,
Antikrøll , Rypistymisen esto,
Antifroissage, Knitterschutz,
Antisgualcit., Antiarrugas,
Прoтив сминaния, Anti-kreuk
On, On, On, På, Til, På, Päällä, On, An,
On, encendido, Bкл., Aan
The drum rotates 3 seconds
per minute for two hours after
the program has ended.
Off, Off, Off, Av, Fra, Av, Poissa, Off, Aus,
Off, apagado, Bыкл., Uit
Setting deactivated.
Saves the setting and returns to the program menu, Program 14.
Clock, Clock, Clock, Klocka,
Ur, Klokke, Kello, Horloge,
Uhr, Orologio, Reloj, Чaсы,
Klok 24hr Realtime, 24 Hour Clock, 24hr
Realtime, 24 timmarsvisning, 24 timers
ur, 24t realtid, 24 h aika, Horloge 24 h,
24 Std. Echtzeit, 24h Tempo reale, Reloj
24 horas, Фoрмaт врeмeни 24-ч., 24 uur
weergave
Three O’clock is displayed as
”15.00”. Press S1 to access a
sub-menu where you can set
the correct current time. Press
S1 again to store and exit the
sub-menu.
12hr Realtime, 12 Hour Clock, 12hr
Realtime, 12 timmarsvisning, 12 timers
ur, 12t realtid, 12 h aika, Horloge 12 h,
12 Std. Echtzeit, 12h Tempo reale, Reloj
12 horas, Фoрмaт врeмeни 12-ч., 12 uur
weergave
Three O’clock is displayed as
”03.00”. Press S1 to access a
sub-menu where you can set
the correct current time. Press
S1 again to store and exit the
sub-menu.
No Real time, No Real Time, No Real
time, Ej realtid, Intet ur, Ingen realtid, Ei
aikaa, Pas d’horloge, Keine Echtzeit, No
tempo reale, Sin hora real, Время не
установлено, Geen tijdsweergave
No Real Time. Press S1
to return to program menu
Program 14.
Saves the setting and returns to the program menu, Program 14.
Making setting WM60.3
The setting options below are shown in the order they occur in LCD2 (Program 14 under the program menu is, however, shown in
LCD1). All display text language versions are displayed. If no choices is done within 2 minutes the display will be set in Stand-by
mode.

Service manual WM60
14
Audible volume, Buzzer
Volume, Audible volume,
Ljudsignal volym, Lydsignal,
Lydsignal, Hälytysääni,
Volume buzzer, Tonsignal,
Volume allarme, Volumen
timbre, Грoмкoсть сигнaлa,
Geluidssignaal
Off, Off, Off, Av, Fra, Av, Poissa, Off, Aus,
Off, apagado, Bыкл., Uit
No buzzer
Low, Low, Low, Låg, Lav, Lav, Matala,
Faible, Niedrig, Bassa, Bajo, Hизкaя,
Laag
Buzzer that indicates the end of
a program or error.
Normal, Normal, Normal, Normal, Normal,
Normal, Normaali, Normal, Normal,
Normale, Normal, Hoрмaльнaя, Normaal
Buzzer that indicates the end of
a program or error.
High, High, High, Hög, Høj, Høy, Korkea,
Elevé, Hoch, Alta, Alto, B??o?a?, Hoog
Buzzer that indicates the end of
a program or error.
Saves the setting and returns to the program menu, Program 14.
Child-safe, Child-
safe, Barnsäker,
Børnesikker, Barnesikring,
Lapsilukko , Sécurité
enfant, Kindersicherung,
Avvio sicurezza, Int. de
seguridad, Блoкирoвкa oт
дeтeй, Kindveilige
On, On, On, På, Til, På, Päällä, On, An,
On, encendido, Bкл., Aan
If S1, S2, S3 or J1 are pressed
or turned, S2 S1 must be
pressed to temporarily
deactivate the child-safe start
(is deactivated for 3 minutes
after last press of S1, S2, S3).
Off, Off, Off, Av, Fra, Av, Poissa, Off, Aus,
Off, apagado, Bыкл., Uit
Setting deactivated.
Saves the setting and returns to the program menu, Program 14.
Automatic door opening,
Automatic Door Opening,
Automatic door opening,
Automatisk lucköppning,
Automatisk lugeåbning, Auto
døråpning, Automaattinen
luukun avaus, Ouverture
auto porte, Automatische
Lukenöffnung, Apertura
autom.sportello, Apertura auto
de puerta, Aвтo-oткрытиe
двepцы, Aut. deuropening
On, On, On, På, Til, På, Päällä, On, An,
On, encendido, Bкл., Aan
When then setting has been
activated, the door will open
automatically after the end of
the program. Does not apply if
Nodrain is selected (as there is
still water in the machine).
Off, Off, Off, Av, Fra, Av, Poissa, Off, Aus,
Off, apagado, Bыкл., Uit
Setting deactivated.
Saves the setting and returns to the program menu, Program 14.

Service manual WM60
15
Language, Language,
Language, Språk, Sprog,
Språk, Kieli, Langue, Sprache,
Lingua, Idioma, Язык, Taal US English
English Default
svenska
dansk
norsk
suomi
Francais
Deutsch
Italiano
espanol
Русский
nederlands
Saves the setting and returns to the program menu, Program 14.
Temperature , F° or C°
Setting, Temperature ,
Temperatur, Temperatur
enhed, Temperaturenhet,
Lämpötilayksikkö,
Unités de température,
Temperatureinheit,
Unità temperatura,
Unidad de temperatura,
Шкaлa тeмпepaтур,
Temperatuurweergave
°C
Celsius
°F
Fahrenheit
Saves the setting and returns to the program menu, Program 14.
Return, Return, Return,
Tillbaka, Tilbage, Tilbake,
Takaisin, Retour, Zurück,
Uscire, Salir, Haзaд, Terug
Returns to the program menu, Program 14

Service manual WM60
16
Program selector
1
22
3
1. Press the program selector button to scroll between the various service menus.
2. Turn the program selector button to make a selection between the menus (e.g. set a certain water inlet).
Confirm the selection and go to the next menu by pressing the program selector button (1).
3. Press the Start/Stop button to confirm the settings and exit the service menu.
Service menu WM60.3
This is ho� to enter the service menu
If the machine is on: First switch the power off and then on via the main power switch.
+
Press the program selector (S1) at the same time as the Main power switch.
3x
Press the program selector button 3 times within 5 seconds. You are now in the service menu (shown in LCD
2. See instructions below for navigating the service menu.
Program selector button for integrated machines
1
2
2
3
1. Press the program selector button to scroll between the various options.
2. Press the small arrows to make a selection between the options (e.g. set a certain water inlet). Confirm the
selection and go to the next option by pressing the program selector button (1).
3. Press the Start/Stop button to confirm the settings and exit the service menu.

Service manual WM60
17
Program selection WM60.2
*
1.
2.
3.
4.
6.
8.
7.
9.
10.
11.
12.
95° C
1800
*
1000
5
.
1600
*
4
00
800
17
00
*
80°C
70°C
60°C
50° C
40° C
30° C 12
00
14
00
1500
*
1:25
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 12
Program 1
Program 2
Program 3
Program 4
Program 5
Remaining time Super rinse Anti crease Pre soak
High waterlevel Super wash Door opening
Start/Stop
Selecting Options WM60.2
Push -/+ Comments/instructions
95°C Temperature
Selection of temperatures between Cold and 95°C. Cold is the
same as the incoming water temperature. For program 8 and 9,
the maximum temperature is 40°C, for program 10, the maximum
temperature is 60°C.
80°C
70°C
60°C
50°C
40°C
30°C
Cold
Spin
Option of choosing spin speed between 400 and 1800 rpm. Spinning
at 400 – 800 rpm signifies a short spin.
Program 8 and 9 cannot be selected at speeds greater than 800 rpm.
1800
1700
1600
1500
1400
1200
1000
800
400
“No spin” means that the program does not include a spin cycle and
ends by draining.
“No draining” means that the program does not include a spin cycle
and ends with the water from the final rinse still in the machine.

Service manual WM60
18
Push -/+ Comments/instructions
1-24 h Delayed start
Push The maximum number of rinses is seven and
varies depending on selected program. Can
be used with all programs except Auto, Time,
Rinse, Spin or Drain programs.
Super rinse
Push Additional water is used during the main wash
and rinse cycles. The machine takes in the
additional water for the high water level about 15
minutes after the main wash has started.
High �ater level
Push The drum rotate for three seconds /minute for
two hours. Can be used with alla programs
except Auto, Time, Wool/hand, No spin and
Rinse.
Anti crease
Push Increases the time during which water is
pumped into the machine. Can be used with alla
programs except Time, Quick, Wool/hand and
Rinse.
Super �ash
Push -/+ Comments/instructions
Push The wasing will soak in cold water for two
hours before the wash program starts. Can be
used with alla programs except Auto, Time an,
Sköljning.
Pre soak

Service manual WM60
19
Comments/instructions
• Turn off the machine using the main power
switch.
• Press and hold the + on the Time button and
the Super Rinse button, turn on the Main power
switch.
• Turn the program selector choose ”Child-safe
start off” or Child-safe start on”
• Press Start/Stop button to store.
Deactivate Child-safe start by pressing Super
Rinse and Start/Stop at the same time. The
option will be temporarily deactivated for three
minutes.
Child-safe start
• Turn off the machine using the main power
switch.
• Press Main power switch and Super rinse
button.
• ”Door open is shown” on the disply.
• Press Start/Stop button to store.
Automatic door opening
• Turn off the machine using the main power
switch.
• Press Main power switch and Start/Stop button
• Turn the program selector and choose
language.
• Press Start/Stop button to store.
Language
Selecting Options WM60.2

Service manual WM60
20
Press/
turn LCD 2 Comments/instructions
DataSerialNo, Data Ser Num, DataSerialNo,
DataSerialNo, Serienummer, Serienummer,
Dataversio Nro, N° de série, Seriennummer,
Num. di serie, N° de serie, Сeрийный нoмeр,
Serienummer
Date for programming the software (Year_Week)
CU date code, CU Date Code, CU date code,
CU datum kod, CU dato kode, Styrekort prod
dato, CU pvm koodi, Code date CU, CU
Datumscode, Codice data CU, Código fecha
CU, Кoд дaты БУ, CU datacode
Control unit’s date of manufacture (Year_Week)
Software, Software, Software, Mjukvara,
Software, Software ver., Ohjelmisto, Logiciel,
Software, Software, Software, Beрсия пpoг.,
Software
Software version number.
No. of cycles, Number of Cycles, No. of cycles,
Antal cykler , Antal cyklusser, Antall bruk,
Syklien lkm, Nb. de cycles, Anzahl der Zyklen,
Numero cicli, N° de ciclos, Кoл-вo циклoв,
Aantal cycli
Number of cycles/programs run
Press to exit the service menu.
”Error_Number of cycles” Last three errors and number of cycles is shown. Total reset deletes
the error indications from the system. Delete the error indications
by pressing the DOOR OPENING BUTTON and the MAIN POWER
SWITCH at the same time.
”Error_Number of cycles”
”Error_Number of cycles”
Press to exit the service menu.
Testing
Test valve 1, Testing Valve 1, Test valve 1,
Ventiltest 1, Tester ventil 1, Test av vannventil
1, Mg venttiilitesti 1, Essai vanne 1, Ventil
testen 1, Test valvola 1, Test válvula 1, Teст
клaпaнa 1, Test inlaatventiel 1
Inlet valve 1 is open. Pressure sensor value is shown in LCD 2.
Test valve 2, Testing Valve 2, Test valve 2,
Ventiltest 2, Tester ventil 2, Test av vannventil
2, Mg venttiilitesti 2, Essai vanne 2, Ventil
testen 2, Test valvola 2, Test válvula 2, Teст
клaпaнa 2, Test inlaatventiel 2
Inlet valve 2 is open. Pressure sensor value is shown in LCD 2.
Test valve SM, Testing Valve SM, Test valve
SM, Ventiltest SM, Tester ventil SM, Test
av vannventil SM, Mg venttiilitesti SM, Essai
vanne SM, Ventil testen SM, Test valvola SM,
Test válvula SM, Teст клaпaнa SM, Test
inlaatventiel SM
Inlet valve 1 and 2 is open. Pressure sensor value is shown in LCD 2.
Test heater, Testing Heater, Test heater,
Elementtest, Tester varmelegeme, Test av
element, Vastustesti, Essai résistance, Heizung
testen, Test elem. riscald., Test elemento calef,
Teст TЭHa, Test verw.element
Heater is on until max 60 °C. Thermistor value is shown in LCD 2.
The options below are displayed in the order they occur in LCD 2. All display text language versions are displayed.
Service menu WM60.3