Aspire Overbed Table User manual

SETUP GUIDE
overbed table

2 3
Description Quantity
Table Top with bracket mounted on bottom surface x 1
Upright Post with quick adjustment lever and fixing knob x 1
C-Shape Base Frame with 4 x black castor wheels (2 x locking) x 1
14mm Bolts (Long) with washers and spacers (FOR BASE) x 2
12mm Bolts (Short) with washers (FOR TABLE TOP) x 2
1. OVERBED COMPONENTS
Thank you for choosing this Aspire Overbed
Table.
This product has been designed to oer
supreme stability, safety and adjustability.
It is important that you read this setup guide
carefully before using your Aspire Overbed
Table.
This Overbed Table comes with the following parts:
LAMINATE TABLE TOP
accommodates food
trays, personal items,
and provides a stable
writing surface
FL AT PACK
CARTON DESIGN is
utilised to improve
shipping / storage
eciency and
reduce potential for
damage
QUICK
ADJUSTMENT
LEVER
makes height
adjustment
easy for users
and carers
FIXING KNOB to
tighten upright
in place
TWO LOCKING CASTORS
allow the table to move easily
and be positioned securely
Laminate
Beech Top
BEA006701
Laminate AC
White Top
BEA006700
Thermoform Recessed
Top (Cream)
BEA028000
Split Tilt Top
(Cream)
BEA028100
12 Month Warranty

4 5
2. ASSEMBLY INSTRUCTIONS 3. ADJUSTING YOUR TABLE
Open the carton carefully. DO NOT USE a box cutter or sharp implement as this may
damage the product. For OH&S, lay the carton on its side with the top of the carton
open and slide out the Overbed Table contents.
To Adjust your Over Bed Table:
1. Insert spacaers, 14mm bolts and
washers into the mounting plate on
the C-shape base (from below).
2. Locate 14mm bolts into the base of the
upright post and tighten. Ensure the
upright post is straight on the base plate
whilst tightening. Loctite or other fixing
agents may be used if required.
3. Insert upright post table support bar
into table top bracket and attach using
12mm short bolts and small washers.
4. Remove the transportation screw from
the upright and your over bed table is
ready for use.
1. Loosen the fixing knob on
the upright post.
2. With one hand pull and
release the quick adjustment
lever and move the table up
or down until the desired
height is reached. Minimal
force should be required.
3. Re-tighten fixing knob to
lock in place.

Imported by:
AIDACARE P/L | 4 Noonan Rd, Ingleburn NSW 2565
T – 1300 133 120 | W – www.aidacare.com.au
MADE IN CHINA
ASUM05.3 060417