Astonica 50105015 User manual

OUTDOOR LIVING
TOSCA SWIVEL ROCKER
Instruction Manual
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
MODEL NO: 50105015, 50105034, 50105059, 50105383
Limited Warranty
World Factory, Inc.®Products for Home Use
World Factory, Inc.®(Seller) warrants to the original Buyer only, that each Astonica™ Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE,
WHICH ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY
THE SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR
INDIRECTLY FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS;
IMPROPER MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED
WARRANTY. This warranty does not apply to damage, heat-induced coloration changes, scratching or
alteration due to normal use or weathering. To make a claim under this Limited Warranty, you must return
the complete product with proof of purchase, transportation prepaid, to any World Factory, Inc.®authorized
service center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS
RELATED TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO
ONE (1) YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY
FOR LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
Made in China
Distributed By:
World Factory, Inc.®©2003
280 Commerce St. • Southlake, TX 76092 USA
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.

A
C
D
EG
FH
B
ASSEMBLY INSTRUCTIONS
1. Unpack all the parts on a flat, non-scratching
surface.
Note: The T-shape bracket (C) will ship
pre-assembled with the 2-1/2” x 5” spring
pieces (D), 1-1/4” x 2” steel plates (E), hex
bolts (F), lock washers (G), and hex nuts (H).
2. Turn the chair assembly (A) upside down.
3. (SEE FIGURE 1) If necessary mount the
T-shape bracket assembly (C) to the support
bar underneath the chair, Insert 2 bolts (F)
through a plate (E), then through the top of
the support bar underneath the seat assembly
(A). Slide the bracket assembly (C) onto the 2
bolts. Place a plate (E) onto the bolts, followed
by lock washers (G) and hex nuts.(H) Do not
tighten completely.
4. Repeat Step 3 on the other side.
5. Tighten all bolts with the two wrenches
provided.
6. (SEE FIGURE 2) Align the seat post (C) with the
central hole of base assembly (B). Carefully insert
the post until fully seated.
Note: A back and forth twisting motion of the
chair and post will ease the assembly process.
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until they have been
obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
ASeat Assembly
BBase Assembly
CT-shape Bracket with Post
D2-1/2" x 5" Pre-drilled Spring Pieces
E1-1/4" x 2" Pre-drilled Steel Plates
F14mm Hex Bolts
14mm Lock Washers
14mm Hex Nuts
G
H
8
8
1
1
1
2
2
8
FIGURE 1
A
C
F
D
G
H
C
B
FIGURE 2
E