Astonica 50102998 User manual

OUTDOORLIVING
Read the instructions and precautions before use of this product
MODEL NO: 50102998
BASKET WEAVE ARMCHAIR
Instruction Manual
Made in China
©2003 Distributed by:
World Factory, Inc.®
Southlake,TX 76092
Limited Warranty
World Factory, Inc.® Products for Home Use
World Factory, Inc.® (Seller) warrants to the original Buyer only, that each Astonica™ Product will be free
from defects in material and workmanship for a period of one (1) year from date of purchase. SELLER’S
SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL
BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN
MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN
MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR
ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT
OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to
damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering. To
make a claim under this Limited Warranty, you must return the complete product, transportation prepaid, to
any World Factory, Inc.® authorized service center. Call 1-888-424-3354 for the location of the nearest
authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR
FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,
ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such provision
shall not affect any other provision herein, this Limited Warranty shall be construed as if such invalid and/or
unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior
agreements, arrangements, or understandings between the parties relating to product warranty.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
OR

ASSEMBLY INSTRUCTIONS
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
Caution: Do not over tighten fasteners.
1.(SEE FIGURE 1) Thread (4) 8mm x 25 studs (F)
 into the back (B). Align the right arm/leg
 assembly (C) and secure it in place with
 (2) flat washers (G) and hex nuts (H). Mount
 the back to the left arm assembly (D) in the
 same manner.
(Do not tighten completely.)
2.(SEE FIGURE 2) Mount the seat (A) to the right
 leg/arm assembly with (2) 8mm x 30 hex
 bolts (E), flat washers (G) and hex nuts (H).
 Mount the seat to the left arm assembly in
 the same manner.
(Do not tighten completely.)
Caution: Do not over tighten fasteners.
A
B
C D
FE H
GI
FIGURE 1
FIGURE 2
3.(SEE FIGURE 3) Stand the chair upright on a
 flat surface and tighten all hex nuts. Place
 the (4) plastic covers (I) on the hex nuts on
 the back of the chair.
FIGURE 3
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 1Seat
B 1Back
C 1Right Arm/Leg
D 1Left Arm/Leg
E 48mm x 30 Hex Bolts
F 48mm x 25 Studs
Flat Washers
14mm Plastic Covers
G
I
8
4
Hex Nuts
H 8
A
E
E
GH
GH
F
F
I
G
H
I
G
H
B
C
D