Astonica 50105364 User manual

OUTDOORLIVING
MODEL NO: 50105364
Wicker & Iron Bistro Table
Instruction Manual
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Limited Warranty
World Factory, Inc.®Products for Home Use
World Factory, Inc.®(Seller) warrants to the original Buyer only, that each Astonica™ Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER
WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM
REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE,
NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not
apply to damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering.
To make a claim under this Limited Warranty, you must return the complete product with proof of purchase,
transportation prepaid, to any World Factory, Inc.®authorized service center. Call 1-888-424-3354 for the
location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR
FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,
ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if such
invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supercedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
Made In China
©2004 World Factory, Inc.®
Distributed By:
World Factory, Inc.®
Southlake, TX 76092
251004rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354.
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY

ASSEMBLY INSTRUCTIONS
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
Caution: Do not over tighten fasteners.
AB
CD
F
E
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
Figure 1
Figure 4
1.(SEE FIGURE 1) Place the table top (A)
 upside down on a non-scratching surface.
2.(SEE FIGURE 2) Insert each leg (B) into
 the plastic sleeves located underneath
 the table top (A).
3.(SEE FIGURE 3) Insert small support
 ring (C) between legs (B) near the
 table top (A).
 Attach support ring to one leg (B)
 with bolts (E) and secure using
 hex nuts (F).
 Repeat this with the other three legs.
NOTE: Do not completely tighten bolts.
5.(SEE FIGURE 4) Turn table assembly
 right side up on a level surface, then
 tighten the bolts (D).
4.(SEE FIGURE 3) Attach large support
 ring (D) near the bottom of the legs (B),
 in the same manner as Step 3.
NOTE: Do not completely tighten bolts.
A
Figure 2
A
B
D
E
A
E
F
C
F
B
Figure 3
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
A Table top 1
B Legs 4
C Small Support Ring 1
D Large Support Ring 1
E Bolts 6mm x 30 16
F Hex Nuts 6mm 16
Parts Detail
12
E
NOTE: This product is intended for residential, non-commercial use.