Asus Aaeon GENE-ADP6 User manual

Last Updated: September 16, 2022
GENE-ADP6
3.5”Subcompact Board
User’s Manual 1st Ed

Preface II
3.5” Subcompact Board GENE-ADP6
Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.

Preface III
3.5” Subcompact Board GENE-ADP6
Acknowledgements
All other products’ name or trademarks are properties of their respective owners.
⚫Microsoft Windows is a registered trademark of Microsoft Corp.
⚫Intel® and Celeron® are registered trademarks of Intel Corporation
⚫Intel Core™ is a trademark of Intel Corporation
⚫Realtek is a trademark of Realtek Semiconductor Corporation.
⚫Ubuntu is a trademark of Canonical.
All other product names or trademarks are properties of their respective owners.

Preface IV
3.5” Subcompact Board GENE-ADP6
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
GENE-ADP6 MB
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.

Preface V
3.5” Subcompact Board GENE-ADP6
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page at AAEON.com for the latest version of this
document.

Preface VI
3.5” Subcompact Board GENE-ADP6
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the system’s
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components.
Use a grounding wrist strap and contain all electronic components in any
static-shielded containers.

Preface VII
3.5” Subcompact Board GENE-ADP6
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII
3.5” Subcompact Board GENE-ADP6
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

Preface IX
3.5” Subcompact Board GENE-ADP6
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
○
○
○
○
○
○
外部信号
连接器及线材
○
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X
3.5” Subcompact Board GENE-ADP6
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
○
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
O：The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only

Preface XI
3.5” Subcompact Board GENE-ADP6
Table of Contents
Chapter 1 - Product Specifications.......................................................................................... 1
1.1 Specifications............................................................................................................ 2
1.2 Block Diagram.......................................................................................................... 6
Chapter 2 –Hardware Information ........................................................................................7
2.1 Dimensions ............................................................................................................... 8
2.2 Jumpers and Connectors......................................................................................10
2.3 List of Jumpers ........................................................................................................12
2.3.1 Auto Power Button Enable/Disable Selection (JP1)................................12
2.3.2 COM 1 Pin 9 Function Selection (JP2).......................................................13
2.3.3 COM 2 Pin 9 Function Selection (JP3)......................................................13
2.3.4 LVDS Backlight Inverter Voltage Selection (JP4).....................................13
2.3.5 LVDS Operating Voltage Selection (JP4)..................................................14
2.3.6 Clear CMOS Jumper (JP5)...........................................................................14
2.3.7 LVDS Backlight Lightness Control Mode Selection (JP6) ......................14
2.4 List of Connectors...................................................................................................15
2.4.1 +5V Output for SATA HDD (CN1)..............................................................16
2.4.2 SATA Port (CN2) ............................................................................................17
2.4.3 External +12V Input (Optional) (CN3).......................................................18
2.4.4 External Power Input (CN4) ........................................................................18
2.4.5 Audio I/O Port (CN5) ...................................................................................19
2.4.6 M.2 B-Key Connector (CN6)......................................................................20
2.4.7 DDR5 SO-DIMM Channel (CN7) ..............................................................20
2.4.8 Front Panel (CN9)..........................................................................................21
2.4.9 DDR5 SO-DIMM Channel 2 (CN10) ..........................................................21
2.4.10 COM Port 3/Port 4 (CN11)..........................................................................22
2.4.10.1 COM Port 3 RS-RS-422/RS-485 ....................................................23

Preface XII
3.5” Subcompact Board GENE-ADP6
2.4.10.2 COM Port 4 RS-422/RS-485...........................................................24
2.4.11 COM Port1/Port2 (CN12)............................................................................25
2.4.11.1 COM Port 1 RS-422/RS-485 ...........................................................26
2.4.11.2 COM Port 2 RS-422/RS-485...........................................................27
2.4.12 USB 2.0 Port 5/Port 6 (CN13) ....................................................................28
2.4.13 Digital IO Port (CN14)..................................................................................29
2.4.14 USB 2.0 Port 7/Port 8 (CN15).....................................................................30
2.4.15 SPI Flash Programming Port (CN16) .........................................................31
2.4.16 LVDS Inverter/ Backlight Connector (CN17)...........................................32
2.4.17 M.2 (E-Key) Connector (CN18)..................................................................33
2.4.18 M.2 (M-Key) Connector (CN19).................................................................33
2.4.19 eDP Connector (CN20)...............................................................................34
2.4.20 LVDS Connector (CN21)..............................................................................36
2.4.21 eSPI Connector (CN22)...............................................................................38
2.4.22 Nano SIM Card Socket (CN23) .................................................................39
2.4.23 RTC Battery Connector (CN24).................................................................40
2.4.24 4-Pin FAN Connector (CN26)....................................................................40
2.4.25 LAN (RJ-45) Port 1/Port 2 (CN27)..............................................................41
2.4.26 LAN Port 1 LED Connector (CN28) ..........................................................42
2.4.27 USB 3.2/USB 2.0 Port 3 (CN29).................................................................43
2.4.28 USB 3.2/USB 2.0 Port1/Port2 (CN30).......................................................44
2.4.29 DP Connector (CN31)..................................................................................45
2.4.30 HDMI Connector (CN33)............................................................................46
2.4.31 USB Type C (CN34)......................................................................................47
2.4.32 FPC Connector (CN35) ...............................................................................49
2.4.33 LAN Port 2 LED Connector (CN36)...........................................................51
2.5 Thermal Solutions..................................................................................................52
2.5.1 Active Cooling Fan - GENE-ADP6-FAN01...............................................52

Preface XIII
3.5” Subcompact Board GENE-ADP6
2.5.2 Heatspreader - GENE-ADP6-HSP01 ........................................................54
Chapter 3 - AMI BIOS Setup ................................................................................................ 56
3.1 System Test and Initialization ..............................................................................57
3.2 AMI BIOS Setup .....................................................................................................58
3.3 Setup Submenu: Main..........................................................................................59
3.4 Setup Submenu: Advanced.................................................................................60
3.4.1 CPU Configuration........................................................................................61
3.4.2 PCH-FW Configuration...............................................................................62
3.4.3 Firmware Update Configuration...............................................................63
3.4.4 PTT Configuration........................................................................................64
3.4.5 Trusted Computing......................................................................................65
3.4.6 SATA Configuration......................................................................................67
3.4.7 Hardware Monitor .......................................................................................68
3.4.7.1 Smart Fan Mode Configuration.....................................................69
3.4.8 SIO Configuration........................................................................................70
3.4.8.1 Serial Port 1 Configuration ...............................................................71
3.4.8.2 Serial Port 2 Configuration .............................................................72
3.4.8.3 Serial Port 3 Configuration .............................................................73
3.4.8.4 Serial Port 4 Configuration .............................................................74
3.4.9 Serial Port Console Redirection ................................................................75
3.4.10 Legacy Console Redirection Settings.......................................................76
3.4.11 AAEON BIOS Robot ....................................................................................77
3.4.12 Power Management....................................................................................79
3.4.13 Digital IO Port Configuration.....................................................................80
3.5 Setup Submenu: Chipset ......................................................................................81
3.5.1 System Agent (SA) Configuration.............................................................82
3.5.2 Memory Configuration...............................................................................83
3.5.3 LVDS Panel Configuration ..........................................................................84

Preface XIV
3.5” Subcompact Board GENE-ADP6
3.6 Setup Submenu: Security.....................................................................................86
3.6.1 Secure Boot...................................................................................................87
3.6.2 Key Management.........................................................................................88
3.7 Setup Submenu: Boot ..........................................................................................90
3.7.1 BBS Priorities..................................................................................................91
3.8 Setup Submenu: Save & Exit...............................................................................92
3.9 Setup Submenu: MEBx.........................................................................................93
3.9.1 Intel® AMT Configuration.........................................................................94
3.9.2 Redirection features.....................................................................................95
3.9.3 User Consent ................................................................................................96
3.9.4 Power Control...............................................................................................97
Chapter 4 –Driver Installation ............................................................................................. 98
4.1 Driver Download/Installation ..............................................................................99
Appendix A - I/O Information..............................................................................................101
A.1 I/O Address Map ................................................................................................. 102
A.2 Memory Address Map ....................................................................................... 104
A.3 IRQ Mapping Chart............................................................................................. 105
Appendix B –Mating Connectors and Cables..................................................................108
B.1 Mating Connectors and Cables........................................................................ 109

3.5” Subcompact Board GENE-ADP6
Chapter 1
Chapter 1 - Product Specifications

Chapter 1 –Product Specifications 2
3.5” Subcompact Board GENE-ADP6
1.1 Specifications
System
Form Factor
3.5” SubCompact Board
Processor
Intel® 12th Generation Core™/Celeron CPU
i7-1270PE (12C/16T, 3.30GHz, up to 4.50GHz, 28W,
TDP-up to 64W)
i7-1265UE (10C/12T, 3.50GHz, up to 4.70GHz, 15W,
TDP-up to 55W)
i5-1250PE (12C/16T, 3.20GHz, up to 4.40GHz, 28W,
TDP-up to 64W)
i3-1220PE (8C/12T, 3.10GHz, up to 4.20GHz, 28W,
TDP-up to 64W)
Celeron® 7305E (5C/5T, 1.00GHz, 15W)
Chipset
Integrated with Intel® SoC
Memory Type
DDR5 4800MHz, Dual Channel SODIMM x 2,
up to 64GB
BIOS
UEFI
Wake on LAN
Yes
Watchdog Timer
255 Levels
Security
TPM 2.0 (NPCT750AABYX)
RTC Battery
Lithium Battery 3V/24mAH
Dimension (L X W)
5.75” x 4” (146mm x 101.7mm)
OS Support
Windows 10/11 (64bit)
Linux Ubuntu 22.04/Kernel 5.15

Chapter 1 –Product Specifications 3
3.5” Subcompact Board GENE-ADP6
Power
Power Requirement
+9-36V or +12V
Power Supply Type
AT/ATX
Connector
Phoenix 2-pin Connector
Power Consumption (Typical)
Intel® Core™ i7-1270 PE, DDR5 32GB x 2,
5.72A@ +12V (Typical)
Intel® Core™ i7-1270 PE, DDR5 32GB x 2,
7.95A@ +12V (Max)
Display
Controller
Intel® Iris® Xe Graphics
Intel® UHD Graphics
LVDS/ eDP
LVDS Dual Channel 18/24bit x 1,
up to 1920 x 1080
eDP 1.4b HBR3, up to 3840 x 2160
Display Interface
HDMI 2.1 x 1, up to 8K x 4K@60Hz or 4K2K
120Hz
DP 1.4a x 1, up to 7680 x 4320 60Hz 30bpp
Multiple Display
Up to 4 Simultaneous Displays
Audio
Codec
Realtek ALC897
Audio Interface
Line-in/Line-out/MIC
Speaker
-

Chapter 1 –Product Specifications 4
3.5” Subcompact Board GENE-ADP6
External I/O
Ethernet
Intel® i219, 10/100/1000Base
Intel® i226, 2.5G
USB
USB 3.2 Gen 2 x 3
USB Type C x 1 (DP 1.4a, PD 5V/3A)
Serial Port
-
Video
HDMI 2.1 x 1
DP 1.4a x 1
Internal I/O
USB
USB 2.0 x 4
Serial Port
COM 1, COM 2 (RS232/422/485, supports
5V/12V/RI)
COM 3, COM 4 (RS232/422/485)
Video
LVDS/eDP x 1
Inverter x 1 (12V/2A)
SATA
SATA 3.0 x 1
+5V SATA Power Connector x 1
Audio
Audio Header x 1
DIO/ GPIO
8-Bit
SMBus/ I2C
SMBus/I2C x1 (Default: SMBus)
Touch
-
Fan
Smart Fan x 1
SIM
Nano SIM x 1
Front Panel
PWR LED, HDD LED, PWR button, HW Reset
Other
-

Chapter 1 –Product Specifications 5
3.5” Subcompact Board GENE-ADP6
Expansion
Mini PCIe/ mSATA
-
M.2
M-Key 2280 x 1 (PCIe x4 Gen 4)
B-Key 3052/3042/2242 x 1 (PCIe x2,
USB 3.2+SATA, USB 2.0, default: USB 3.2+SATA)
E-Key 2230 x 1 (PCIe, USB 2.0)
Other
FPC x 1 (PCI x4 Gen 4, only supports Graphic or
NVME)
Environmental
Operating Temperature
32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature
-40°F ~ 185°F (-40°C ~ 85°C)
Operating Humidity
0% ~ 90% relative humidity, non-condensing
MTBF (Hours)
344,735
Certification
EMC
CE/FCC Class A

Chapter 1 –Product Specifications 6
3.5” Subcompact Board GENE-ADP6
1.2 Block Diagram