Asus ADD2 User manual

ASUS ADD2 HDMI/DVI card installation 1
ASUS ADD2 HDMI/DVI card installation
E3568
1. Productspecication
Product
Name
ADD2 HDMI/DVI
Chip Chrontel 7315B
Resolution HDMI 1080P
DVI up to 1600 x 1200
Connectors 1 x HDMI port
1 x DVI port
1 x S/PDIF In header
Motherboard
Support
P5KPL-VM, P5K-VM, P5K-V
* Refer to www.asus.com for the latest motherboard support list.
Interface PCI Express x16 (SDVO Bus)
Accessory 1 x S/PDIF cable
Remarks Supports HDCP and HDMI TV Display
Low-Prole Bracket (Figure 1)
High-Prole Bracket (Figure 2)
2. Productinformation
HDMI port
DVI port
Chrontel7315B S/PDIFInheader
Figure 1
HDMI port
DVI port
Chrontel7315B S/PDIFInheader
Figure 2
cardend
S/PDIFcable
motherboard
end

2 ASUS ADD2 HDMI/DVI card installation
3. HardwareInstallation
3.1. Locate an empty PCI Express x16
slot on the motherboard.
3.2. Align the card connector with the
slot and press rmly until the card
sits on the slot completely.
3.3. Connect the white end of the
S/PDIF cable to the connector
labelled SPDIF_IN on the HDMI/
DVI card.

ASUS ADD2 HDMI/DVI card installation 3
3.4. Connect the black end of the
S/PDIF cable to the Digital audio
connector (4-1 pin SPDIF_OUT)
on the motherboard.
• The expansion slot layout differs depending on the motherboard model.
• You can use either the DVI port or the HDMI port for digital display output at
one time. Simultaneous output for DVI and HDMI is not supported.
3.5. Carefully and straight connect the
DVI cable or the HDMI cable to
the DVI port or the HDMI port on
the HDMI/DVI card.

4 ASUS ADD2 HDMI/DVI card installation
15G063977000
4. SoftwareInstallation
4.1. Place the motherboard support
CD to the optical drive.
4.2. The support CD automatically
displays the Drivers menu if
Autorun is enabled in your
computer. Click the Intel
GraphicsAcceleratorDriver to
install the HDMI/DVI card driver.
The Drivers screen differs depending on the motherboard.
4.3. When you nish installing the
driver, restart the computer.
4.4. Right-click the Intel®Graphics
MediaAcceleratorDriver icon
on the system tray and select
GraphicsProperties....
4.5. In the DisplayDevices tag,
select Twin, Intel(R)Dual
DisplayClone or Extended
Desktop to set your favorite
display mode.