Atag One User manual

User manual
One
GB

Basic Operation ATAG One thermostat
Left arrow key:
- Lowering the value
- Scrolling upwards
Centre key (blue):
 -Conrmingaquestionorselection
Right arrow key:
- Increasing a value
- Scrolling down
TIP: If the display is dark or dim, it can be activated by
touching one of the keys.
Default readout screen
Indication boiler in operation
Current room temperature
Set(orrequired)temperature
Selected function (in this case, according to schedule)
Outside temperature (online or from outdoor sensor)
Weather icon (only online)

Welcome to ATAG One, your thermostat.
Keep the Network security key or Wi-Fi code handy.
Do not give the code to third parties.
You must have your smart phone or tablet connected to
your wireless network.
1. Download One-app on your smart phone and/or tab-
let. Go to the Playstore/Appstore and search for: atag
one.
2. ATAG One thermostat.
 Atrststart:
Select your language and follow the steps until CON-
FIGURE and choose: YES*.
(When One is already connected: Go to SETTINGS
and select RECONFIGURE: YES).
(From SW/R43: Go to SETTINGS/CONFIGURATION/WIFI-
RECONFIGURATION)
*When choosing NO follow the steps for adjusting time and
date. The One will not be connected to the Wi-Fi network
andwillfunctionofineasaroomcontroller.
3. Start One-app.
Press Wi-Ficonguration.
CONFIGURE
Would you like to connect
your One app now?
Yes No
Remember me
E-mail address
Password Reset
Login
Register user
Wi-Ficonguration
Skip login
GB
Watch the instructions
video on Youtube.

CONTINUE
4. Go to SETTINGS/Wi-Fi of your smart phone or tablet.
Select ATAG One xxxxxxxx and wait until the blue
check mark is shown.
5. Return to the One-app.
Press CONTINUE and follow the steps on One-app
and One thermostat.
The setup is now COMPLETED!
To use all features and services an account has to be
created.
6. Create from the login screen from One app an ac-
count: Press REGISTER USER
Take care your smart phone or tablet is connected to
the same wireless network as your One. Check this at
SETTINGS/Wi-Fi of your smart phone or tablet.
Remember me
E-mail address
Password Reset
Login
Register user
Wi-Ficonguration
Skip login
COMPLETED
Setup is completed
CONTINUE

7. Follow all steps on One-app.
8. Open your e-mail (check your spam box, if necessary)
and press the activation text.
9. Log in with your email address and the password you
created previously
Press LOGIN
Press SEARCH
Select your One XXXXX
Press CONNECT
Check for a successful connection: Compare the display-
ed time of the One thermostat with the time on your
smartphoneortablet.Thismustbeequal.
You can now also use your account to login at:
portal.atag-one.com
Watch the instructions video on Youtube:
atagheating.co.uk GB

8G.51.38.01 / 11.15