AT&T RM 5400 User manual

Equipment information
and assembly guide for your AT&T Service
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
Please ensure that you have set-up the equipment before the date scheduled
with your AT&T Order Manager for Test and Turn Up of your site

The following components are included in your router package:
What’s in the Box
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
2
Cisco 2921 Router
Router power cable
Site Documentation Package
RM 5400
Fiber cable included if smart jack is
fiber
RJ11 modem cable
Labelled ISE644
RJ45 Cable Labelled ISE693
if smart jack is copper
RJ45 Cable
Labelled ISE-10301

Understanding your Router
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
3
Rear View of Cisco 2921
Front View of Cisco 2921
Power
Socket
On/Off Switch
GE0/1
GE0/2
GE0/0
RJ-45
Consol
e Port
SFP

Understanding your Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
4
Rear View of RM 5400Front View of RM 5400

Understanding your RM 5400 Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
5
Rear Panel of RM 5400
Front Panel of RM 5400 modem

Step 1 Attach Power Cables to Router and Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
6
Plug in power cord to router
To Power Outlet
on the wall

Step 2: Setup the RM 5400
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
7
11
2
3
1. Connect the two antennas to ANT1 and ANT 2
2. Connect the Power Supply and turn the power on.
3. Wait for a couple of minutes till front panel lights are stabilized
4. Setup the RM 5400 Modem where you can get at least 2 Signal Strength lights are lit
5. Move around up to 25 feet from the Router if necessary to get 2 signals.
6. Secure the RM 5400 modem to any permanent fixture

Step 3 Connect RM 5400 Modem to the Router
Connect console cable to the lower right,
blue-edged console port in router
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
8
RM 5400
Connect to more device console ports if needed as shown
cable ISE 10301

Step 4 Connect Router to Access Circuits
Connect the RJ45 cable (from the
Smart Jack) to the GE0/0 port
(Upper far right)
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
9
OR –If the smart jack is fiber
connect the fiber cable (from the
Smart Jack) to the SFP module in the
SFP port
RJ45 Cable
Labelled ISE693

Step 5 Connect Router to your Local Network
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
10
Other end of Ethernet or the Fiber cable can be plugged into server, computer, or you local network, etc.
Power on installed equipment.
Customer provided
LAN Cable
If 10/100/1000BT LAN
connection, plug your Ethernet
cable RJ45 into GE0/1 port on
back of router(Lower right) or
per instructions in your Site
Documentation Package
Customer provided
Fiber Optic Cable
OR –If LAN Connection is fiber,
plug your Fiber Optic cable into
GE0/0 (Upper far right) or per
instructions in your Site
Documentation Package