Atdec VISIDEC FOCUS ARTICULATED ARM DOUBLE Operation instructions

Many experts believe that the extended use of any computer
screen has the potential to cause serious injury to your eyes,
neck and back. This can be largely avoided by correctly
positioning your display.
Viewing Angle: Ergonomists recommend that the optimal position
of your display should be slightly below eye level. When looking at the
display’s centre the user should have a downward visual angle of
approximately 10°-20°.
Height: As a guide, the height (h) of your display should approximately
be as follows: - Tall Male (Max): 560mm (22”)
- Short Male (Min): 368mm (14½”)
- Tall Female (Max): 520mm (20½”)
- Short Female (Min): 356mm (14”)
Distance: For visual comfort, a viewing distance (d) between 500mm
(20”) to 750mm (29½”) is recommended.
Tilt Angle: Angular adjustments to reduce reflection on your display
should range between 5° forward tilt to 15° backward tilt.
USER
OPERATING CARD
For your comfort and safety please take
a few moments to adjust the position of
your display
Ergonomic Guidelines
To adjust the Visidec Focus Articulated
Arm Double please refer to the
instructions overleaf. Use the Ergonomic
Guidelines on the back page as a guide
for correct positioning.
Please do not
remove card from the
Visidec Focus
Articulated Arm Double

1 Adjusting Height
Step 1:
Unlock
Step 3:
Lock
Step 2:
Lift/Lower
atdec.com Due to continuing product development, the manufacturer reserves
the right to alter specifications without notice.
Published
25.01.08 ©
NOTE: This procedure requires two people.
NOTE: If the Visidec Focus Articulated Arm
Double is set up using the Desk Clamp mounting
option the displays can only be configured side
by side as shown above.
2 Adjusting the Display Bracket
Tighten
Loosen
TILT (screen angle up/down)
Tighten
Loosen
PORTRAIT/LANDSCAPE
Allen Key
Storage
95º
Max.
PAN (screen angle left/right)
USER OPERATING CARD
For your comfort and safety please take a few
moments to adjust the position of your display