Atek ARF S 58 User manual

KK-ARF.002 01.03.21 Rev No:2
1
ARF S 58
SINCOS ROTARY ENCODER
USER MANUAL
ARF S 58 series SinCos rotary encoders measure with magnetic and optical principle. They
offer 2048 pulse resolution per revolution.
They are particularly suitable for applications in the field of elevator and drive technology.
Thanks to their high signal quality, they work stably without being affected by noise.
GENERAL INFORMATIONS
•The installation of the product is carried out by the customer who purchases the product, according to the wiring diagrams,
installation information, etc. in this manual.
•Maintenance and repair should be done by the technicians authorized by the manufacturer firm.
•There must be minimum distance between the sensor and control unit. Avoid additions except the suitable connector unless
it needs.
•Keep away the sensor cable from as high power energy cables, contactor, motor, switched power supplies, inductive and
capacitive noisy supplies.
•Shielding edge of the sensor cable must be ground connected.
•Not to damage the sensor supply directions and voltage must be paid attention (For TTL sensor max. 5V; PP, HTL, HPL sensor
max. 30V). Don’t energize before all connections completed.
•Transport and storage should be at their original packaging and an ambient temperature of -40°C / +100°C in such a way that
they will not be exposed to dust, humudity, impact, vibration, falling or water.
•Chemicals such as alcohol, thinner etc. should not be used for cleaning the product. The product should be wiped with a
damp cloth.
•The product may be damaged and may become unusable if used outside of the specifications in the user manual.
•The product will be out of warranty if used outside of the specifications in the user manual and opened or repaired other
than authorized services.
WARNINGS
ELECTRICAL CONNECTIONS
A and B signals are incremental signals, 2048 units are produced in one turn. R (reference) signal is generated 1 unit in 1
round. C and D signals are absolute signals. They are generated 1 unit in 1 round.
SIGNAL
CABLE COLOR
A(+)
Yellow
A(-)
Blue
B(+)
Green
B(-)
White
C(+)
Orange
C(-)
Purple
D(+)
Light Blue
D(-)
Brown
R(+)
Pink
R(-)
Grey
+V
Red
0V
Black

KK-ARF.002 01.03.21 Rev No:2
2
MECHANICAL DIMENSIONS
MOUNTING TO THE MOTOR SHAFT
The cross-head screw on the
back of the product is
removed.
The flat-head screw is turned
clockwise until the hole in the
middle is opened.
When the hole in the middle
is opened, turning process is
stopped.
M5 screws are connected to
the motor shaft from the
middle of the product.
The M5 screw is tightened to
the motor shaft.
The flat-head screw is turned
anticlockwise until the hole
in the middle is closed.
When the hole in the middle is
closed, turning process is
stopped.
The cross-head screw on the
back of the product is fixed
and mounting is complated.
1
2
3
4
5
6
7
8

KK-ARF.002 01.03.21 Rev No:2
3
Electrical Connection
3M : 3 m PVC cable
5M : 5 m PVC cable
7M : 10 m PVC cable
*Optionally, different
cable lengths can be
requested.
Mechanical Specifications
Max. Operating Speed
3000 RPM
Body Diameter
59.6 mm
Shaft Diameter
10 mm tapered
Operating Temperature
-25°C...+85°C
Storage Temperature
-40°C...+100°C
IP Protection Class
IP54
Weight
~250 gr
Material
Body: Aluminum
Shaft: Stainless Steel
Electrical Specifications
Measuring Principle
Magnetic and optic
Suuply Voltage
5 VDC
Current Consumption
≤100 mA
Reverse Polarity Protection of the
power supply
Yes
Electrical Connection
4x0,14 mm2+ 4x2x0,14 mm2shielded PVC cable
Sin/Cos Interface
Frequency
≤180 kHz
Signal Level
1 Vpp (±10 %)
Short Circuit Protection
Yes
Pulse Rate
2048 ppr
Resolution
2048: 2048 pulse
ARF X XXX XXXX XXX XX XX
PRODUCT CODE
Supply Type
TTL : 5 VDC
Body Diameter
058 : 59.6 mm
Model
Flange Type
FM : FM Flange
Shaft Type
S : Shafted
Product
Description
ARS S 58
SinCos Rotary Encoder
User Manual
1 pcs
Mounting and Dismounting Screws
1 pcs M5 mounting screw, 1 pcs M6 dismounting screw
TEHNICAL SPECIFICATIONS
BOX CONTENTS

KK-ARF.002 01.03.21 Rev No:2
4
Disposal of Packagings: Packaging materials consist of recyclable materials. For providing recycling, please
dispose waste packagings to collecting points of authorized recycling facilities.
Disposal of E-Waste: This device is in conformity with WEEE Directive and consists of recyclable materials. This
product should not be disposed with general waste for preventing negative effects on enviroment and human
health. This product should be disposed to collecting points of authorized recycling facilities. Further
information can be reached from authorized unit.
Manufacturer Firm’s Title, Address Details
Manufacturer Firm: ATEK ELEKTRONİK SENSÖR TEKNOLOJİLERİ SANAYİ VE TİCARET A.Ş.
Address: Gebze OSB Mahallesi, 800. Sokak, No:814/1 Gebze, KOCAELİ/TURKEY
TEL: [phone] FAX: [phone]
Web: www.ateksensor.com E-mail: [e-mail]
Authorized Service’s Title, Address Details
Authorized Service: ATEK ELEKTRONİK SENSÖR TEKNOLOJİLERİ SANAYİ VE TİCARET A.Ş.
Address: Gebze OSB Mahallesi, 800. Sokak, No:814/1 Gebze, KOCAELİ/TURKEY
TEL: [phone] FAX: [phone]
E-mail: [e-mail]