ATEN VS-134 User manual

INTRODUCTION
Overview
Connecting several monitors to a single PC is effective and
affordable with the new video broadcast box from ATEN.
Video Splitter is a boosting device that duplicates the output
from one PC to multiple monitors, allowing one computer to
display images on up to four or eight monitors. This product
emphasizes the information you want to display by expanding
computer demonstrations to every members of your audience.
Features
• Duplicate video signals to four or eight outputs.
• Extend monitors distances as much as 210 feet from
the computer.
• Support 350/300 MHz video bandwidth ( -3dB ).
• Suitable for XGA, SVGA, VGA and Multisync monitors.
• Supports at least 1600x1280 Resolution.
• Supports one XGA port ( video output 1 ).
• DDC compatible : If you connect a DDC type monitor to
video out 1, all other monitors must be able to support the
heightest video resolution that the DDC monitor can
provide.
(DDC : allows communication between the monitor and PC
system for optimal Video Configuration.)
Connect
VS-134 350 MHz Specification
VS-138 300 MHz
Note
• This product is not suitable for CGA, EGA, MONOCHROM
type monitors using digital video signal.
• UL-2919 rated cable is recommanded for the best
video quality.
FUNCTION
Power Consumption
Cable Distance
Signal Type
Connector-Input(male)
Connector-Output(female)
Operation Temperature
Stock Temperature
Humidity
Enclosure
Weight
Dimensions(LxWxH)
VS-134 VS-138
AC 9V, 300mA(max) AC 9V, 500mA(max)
65M(210ft.)
XGA, VGA, SVGA, Multisync Monitor
1 High Density HD-15
4 or 8 High Density HD-15
5˚C ~ 40˚C
-20˚C ~ 60˚C
0% ~ 80% RH, noncondensing
Plastic / Metal
1150g 1200g
224x152x52 (mm)
1
2
7
8

THIS PACKAGE INCLUDES
• One Video Splitter VS-134 / VS-138
• One Power Supply ( AC 9V 500mA for VS-134 )
( AC 9V 1A for VS-138 )
• Video Splitter User's Manual
Please read this manual thoroughly and follow the instruction
procedures to prevent any damage to the VS-134 / VS-138 and
or the connecting devices.
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE
PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed,
implied, or statutory with respect to the contents or use of this
documentation, and specially disclaims its quality, performance,
merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update device
or documentation without obligation to notify any individual or
entity of such revisions, or update. For further inquires please
contact your direct vendor.
Cascading Multiple Video Splitter
To cascade Video Splitter, connect the VIDEO IN port of one
VIDEO SPLITTER to the VIDEO OUT port of another VIDEO
SPLITTER.
Preventing Radio & TV Interference
WARRING!!! This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions manual, may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A
computing device pursuant to Subpart J of part 15 of FCC Rules,
which are designed to provide reasonable protection against such
interference when operate in a commercial environment. Operations of
this equipment in a residential area is likely to cause interference in
which case the user at his own expence will be required to take
whatever measures may be required to correct the interference.
ATEN INTERNATIONAL CO., LTD.
12F, NO.101, Sung-Chiang Rd., Taipei, 104, Taiwan
TEL : [phone] FAX : [phone]
E-mail : [email protected]
Manual Part NO. PAPE-1116-100
Printed in Taiwan 10/97
Install the Hardware
A. Turn off video splitter.
B. Connect the video signal from PC to the VIDEO IN of VIDEO
SPLITTER by a high density 15 pin D type male/female
cable.
C. Connect VIDEO OUT's of VIDEO SPLITTER to monitors by
high density 15 pin D type male/female cables.
D. Turn on the power of VIDEO SPLITTER and it is ready.
INTRODUCTION
Hardware Requirement
• One or more XGA, SVGA, VGA and Multisync compatible
analog monitors with a PC standard high density male 15
pin D type cable.
• One XGA, SVGA, VGA and Multisync analog video card with
a PC standard high density female 15 pin D type
connector.
©Copyright 1997 ATEN® International Co., Ltd.
All brand names and trademarks are the registered property of their respective owners.
USER'S MANUAL