ATEN UC232C User manual

UC232C
USB-C to RS-232 Adapter
User Manual

UC232C User Manual
ii
Compliance Statements
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital service, pursuant to Part 15 of the FCC rules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation Any changes or modifications made to this equipment
may void the user’s authority to operate this equipment This equipment
generates, uses, and can radiate radio frequency energy If not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications However, there is no guarantee that interference will
not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
The device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment
KCC Statement

UC232C User Manual
iii
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003
RoHS
This product is RoHS compliant

UC232C User Manual
iv
User Information
Online Registration
Be sure to register your product at our online support center:
Telephone Support
For telephone support, call this number:
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose Any of
the manufacturer's software described in this manual is sold or licensed as is
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device It is the
responsibility of the user to correct such interference
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE
International http://eservice.aten.com
International 886-2-8692-6959
China 86-4 -81 - -81
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
1-949-428-1111

UC232C User Manual
v
Product Information
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller Visit ATEN on the Web for a list of locations and telephone numbers:
International http://www.aten.com
North America http://www.aten-usa.com

UC232C User Manual
vi
Package Contents
Check to make sure that all the components are in working order If you
encounter any problem, please contact your dealer
1 UC232C USB-C to RS-232 Adapter
1 user instructions

UC232C User Manual
vii
Table of Contents
Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
1. Introduction
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. Hardware Setup
Connecting the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Appendix
Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ATEN Standard Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

UC232C User Manual
viii
About this Manual
This user manual is provided to help you get the most from the UC232C unit
It covers all aspects of installation, configuration, and operation An overview
of the information found in the manual is provided below
Chapter 1, Introduction introduces you to the USB-C to RS-232 Adapter
Its purpose, features, declaration, and panel components are presented and
described
Chapter , Hardware Setup describes the steps that are necessary to
quickly and safely set up your installation
Appendix provides a list of safety instructions and precautions, contact
information for ATEN technical support, product specifications, and other
technical information
Note:
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit or any connected
devices
This product may be updated with features and functions added, improved
or removed since the release of this manual For an up-to-date user
manual, visit http://www aten com/global/en/

UC232C User Manual
ix
Conventions
This manual uses the following conventions:
Monospaced Indicates text that you should key in.
[ ] Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1. Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
>Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start > Run means to
open the Start menu, and then select Run.
Indicates critical information.

UC232C User Manual
x
This Page Intentionally Left Blank

1
Chapter 1
Introduction
Overview
The UC232C is a USB-C to RS-232 adapter that enables legacy serial device
connectivity for laptops / PCs without a COM / DB-9 serial port Supporting
both Windows and Mac platforms with data transfer rates up to 921 6 Kbps for
rapid performance, it serves as a convenient connectivity solution for industrial
automation systems, scientific instrument, point of sale systems, and any
specialized industrial and consumer applications
Features
Supports RS-232 serial interface
Excellent anti-electromagnetic interference (anti-EMI) capability for
stable transmission performance
Full compliance with USB specifications
Supports up to 921 6 Kbps data transfer rates
OS Compatibility: Windows, Mac, and Linux
Works with legacy serial devices
System Requirements
USB Host Controller installed on the system
Operating Systems
Supported operating systems are shown in the table below
OS Version
Windows 2 , Vista, 7, 8, 8.1, 1 , or above
Mac OS 1 or later
Linux Kernel 2.6.15 or later

UC232C User Manual
2
Hardware Overview
No. Component Description
1 serial connector Connects to a serial device.
2 Connector nuts Connects to a serial device.
3 power LED Lights to indicate the unit is powered on.
4 USB-C
connector
Connects to a USB-C computer.
2421
32
3332

3
Chapter
Hardware Setup
Connecting the Unit
Follow the steps below to connect the UC232C unit
1 Connect the USB-C connector to the computer and allow the driver to
install
Note: If you are using a computer that doesn’t have the driver installed for
the device, scan the product page QR code on the QSG or go to our
official website to download and install the UC232C driver before
suing the UC232C
2 Connect the RS-232 connector to a serial device
3 Power on the serial device
1 Please review the safety information regarding the placement of
this device in Safety Instructions, page 5
2 To prevent damage to your installation from power surges or
static electricity It is important that all connected devices are
properly grounded
or or
Alarm SensorCamera
VTC.DST.34323Laptop
or or
Alarm SensorCamera
USB-C RS-232
12

UC232C User Manual
4
This Page Intentionally Left Blank

5
Appendix
Safety Instructions
General
This product is for indoor use only
Read all of these instructions Save them for future reference
Follow all warnings and instructions marked on the device
Do not place the device on any unstable surface (cart, stand, table, etc ) If
the device falls, serious damage will result
Do not use the device near water
Do not place the device near, or over, radiators or heat registers
The device cabinet is provided with slots and openings to allow for
adequate ventilation To ensure reliable operation, and to protect against
overheating, these openings must never be blocked or covered
 The device should never be placed on a soft surface (bed, sofa, rug, etc ) as
this will block its ventilation openings Likewise, the device should not be
placed in a built in enclosure unless adequate ventilation has been provided
 Never spill liquid of any kind on the device
 Unplug the device from the wall outlet before cleaning Do not use liquid
or aerosol cleaners Use a damp cloth for cleaning
 The device should be operated from the type of power source indicated on
the marking label If you are not sure of the type of power available,
consult your dealer or local power company
 To prevent damage to your installation it is important that all devices are
properly grounded
 Do not allow anything to rest on the power cord or cables Route the
power cord and cables so that they cannot be stepped on or tripped over
 Position system cables and power cables carefully; Be sure that nothing
rests on any cables
 Never push objects of any kind into or through cabinet slots They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock
 Do not attempt to service the device yourself Refer all servicing to
qualified service personnel

UC232C User Manual
6
 If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair
 The power cord or plug has become damaged or frayed
 Liquid has been spilled into the device
 The device has been exposed to rain or water
 The device has been dropped, or the cabinet has been damaged
 The device exhibits a distinct change in performance, indicating a need
for service
 The device does not operate normally when the operating instructions
are followed
 Only adjust those controls that are covered in the operating instructions
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair
 Avoid circuit overloads Before connecting equipment to a circuit, know
the power supply’s limit and never exceed it Always review the electrical
specifications of a circuit to ensure that you are not creating a dangerous
condition or that one doesn’t already exist Circuit overloads can cause a
fire and destroy equipment

Appendix
7
Technical Support
International
For online technical support – including troubleshooting, documentation,
and software updates: http://support aten com
For telephone support, see Telephone Support, page iv:
North America
When you contact us, please have the following information ready beforehand:
Product model number, serial number, and date of purchase
Your computer configuration, including operating system, revision level,
expansion cards, and software
Any error messages displayed at the time the error occurred
The sequence of operations that led up to the error
Any other information you feel may be of help
Email Support [e-mail]
Online Technical
Support
Troubleshooting
Documentation
Software Updates
http://www.aten-usa.com/support
Telephone Support 1-888-999-ATEN ext 4988
1-949-428-1111

UC232C User Manual
8
Specifications
Function UC 3 C
Connectors USB Port 1 x USB-C Male
Serial 1 x DB-9 Male
Data Rate Up to 921.6 kbps
Cable Length 45 cm
LED Power (Orange)
Power Mode Bus-powered
USB Specification USB Compliant
Environmental Operating
Temp
– 4 °C
Storage Temp -2 – 6 °C
Humidity – 8 % RH, Non-condensing
Physical
Properties
Housing Plastic
Weight . 4 kg ( . 9 lb)
Dimensions
(L x W x H)
6.59 x 3.4 x 1.6 cm
(2.59 x 1.34 x .63 in)

Appendix
9
ATEN Standard Warranty Policy
Limited Hardware arranty
ATEN warrants its hardware in the country of purchase against flaws in
materials and workmanship for a Warranty Period of two [2] years (warranty
period may vary in certain regions/countries) commencing on the date of
original purchase This warranty period includes the LCD panel of ATEN LCD
KVM switches For UPS products, the device warranty is two [2] years but
battery is one [1] year Select products are warranted for an additional year (see
A+ Warranty for further details) Cables and accessories are not covered by the
Standard Warranty
hat is covered by the Limited Hardware arranty
ATEN will provide a repair service, without charge, during the Warranty
Period If a product is detective, ATEN will, at its discretion, have the option
to (1) repair said product with new or repaired components, or (2) replace the
entire product with an identical product or with a similar product which fulfills
the same function as the defective product Replaced products assume the
warranty of the original product for the remaining period or a period of 90 days,
whichever is longer When the products or components are replaced, the
replacing articles shall become customer property and the replaced articles
shall become the property of ATEN
To learn more about our warranty policies, please visit our website:
http://www aten com/global/en/legal/policies/warranty-policy/
© Copyright 2 23 ATEN® International Co., Ltd.
Released: 2 23-1 - 4
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.