Atkins AquaTuff 351 User manual

Digital Thermocouple Thermometer
Warranty and User Guide
Cooper-Atkins Corporation
33 Reeds Gap Road
Middlefield, CT 06455-0450 U.S.A
Telephone: [phone]
Fax: [phone]
[email protected] • www.cooper-atkins.com
®
AquaTuff™
351
AquaTuff™
352
AquaTuff™
353

Press to turn instrument ON or OFF.
Press to select Fahrenheit or Celsius
temperature scale.
OPERATION:
1) Observing correct polarity, insert Type K
thermocouple probe into connector on top of
instrument.
2) Press key to turn instrument on.
3) Default temperature scale is Fahrenheit. To change
temperature scale, press key.
(NOTE: Display
will toggle between “F” and “C” icons on right
side of display with each press of the key).
4) The instrument has an auto off feature that will turn
off unit after 10 minutes of non keypad activity to
conserve battery life. To manually turn instrument off,
press and hold key momentarily.
23
AquaTuff™ 352 THERMOMETER
Press to turn instrument ON or OFF. When
used in combination with SHIFT key, enables
or disables AUTO-OFF feature.
Press to select FAHRENHEIT or CELSIUS
temperature scale. When used in
combination with SHIFT key, selects tenth
degree or whole degree resolution.
Press to “FREEZE” current temperature
reading on display. SHIFT function provides
secondary user settings with other keys as
noted.
Press to turn on BACKLIGHT for viewing
temperatures in low lighting conditions.
When pressed, BACKLIGHT will remain on
for 5 seconds.
OPERATION:
1) Observing correct polarity, insert Type K
thermocouple probe into connector on top of
instrument.
2) Press key to turn instrument on.
3) Default temperature scale is Fahrenheit. To change
temperature scale, press key.
(NOTE: Display
will toggle between “F” and “C” icons on right side of
display with each press of the key).
TABLE OF CONTENTS
English..........................................3-9
Español.....................................10-17
Français....................................18-25
Deutsch.................................... 26-33
.........................................34-40
.......................................41-47
Manufactured in the U.S.A. by Cooper-Atkins Corporation
An ISO 9001 Registered Facility
33 Reeds Gap Road
Middlefield, CT 06455 0450 U.S.A
CUSTOMER SERVICE: 800 835 5011 FAX: [phone]
Email: info@cooper atkins.com • Website: www.cooper atkins.com
27 958550B
AquaTuff™ 351 THERMOMETER

OVERVIEW - Continued
In STANDARD TEMPERATURE MODE, the instrument
functions like a normal thermometer. In ITS™Mode, the
instrument operates with the Intelligent Temperature
Stabilization™ feature. The 353 series instrument has a
unique feature to display temperature of item being
measured when the temperature has reached its final
stabilized temperature. The purpose of this feature is to
assist the user in determining when the final stabilized
temperature has been reached.The ITS feature is
dynamic, in that it operates continuously in real time. It
can be used in ITS Mode with the option of recording
stabilized temperature readings or simply as a
thermometer with ITS functionality. The MEMORY MODE
is for viewing ITS temperature data stored in memory
and you can scroll in both directions. The key
easily allows the user to select desired mode of
operation.
STANDARD TEMPERATURE MODE:
1) Press ON/OFF key to turn instrument ON/OFF.
2) Default temperature scale is Fahrenheit. To change
temperature scale, with instrument turned OFF,
press and hold key and then press key
to enter USER MODE
(NOTE: Display will show
“USEr”)
. Press key to switch between
Fahrenheit and Celsius (NOTE: Display will toggle
between “F” and “C” icons on right side of
display with each press of the key). Press
key to exit USER MODE to use instrument in
STANDARD TEMPERATURE MODE.
3) The instrument has an auto off feature that will turn
off unit after 10 minutes of non keypad activity to
conserve battery life. To disable auto off feature, with
instrument turned OFF, press and hold the MODE
key and then press key to enter USER
MODE. Press key to enable or disable auto off
feature. When active, the AUTO icon appears at the
top of LCD display. Press key to exit USER
MODE to use instrument in STANDARD
TEMPERATURE MODE.
ITS MODE (Intelligent Temperature Stabilization™):
1) To use ITS MODE, press to turn instrument ON. On
power up, the instrument is placed in STANDARD
TEMPERATURE MODE. Press the key to
select and activate the ITS function. The ITS icon will
appear at the top of the LCD when ITS MODE is
selected.
4) The instrument has an auto off feature that will turn
off unit after 10 minutes of non keypad activity to
conserve battery life. To manually turn instrument off,
press and hold key momentarily. To disable
AUTO-OFF feature, press and hold key and
then press key.
(NOTE: “AUTO” icon at top
of display will appear when AUTO-OFF feature is
active).
5) The resolution default setting is tenth degree. To
change resolution to whole degree, press and hold
key and then press key.
6) Press key to turn on backlight. When pressed,
the backlight will remain on for 5 seconds and
automatically turn off.
NOTE: USE OF BACKLIGHT WILL
SIGNIFICANTLY DECREASE BATTERY
LIFE DUE TO INCREASED POWER
REQUIRED FOR BACKLIGHT OPERATION
7) The instrument has a “HOLD” feature to capture the
current temperature reading on the display. To
activate the hold feature, press and release the
key. The current temperature reading will flash on the
display and the hold icon will appear at top of display.
Press the key again to return to STANDARD
TEMPERATURE MODE.
45
AquaTuff™ 353 THERMOMETER
Press to turn instrument ON or OFF.
Press to select Standard, ITS™, or Memory
mode of operation.
In ITS Mode, press to store ITS
temperature readings. In Memory Mode,
press to scroll forward. In User Mode, press
to select temperature scale.
In Memory Mode, press to scroll backward.
In User mode, press to enable/disable
Auto Off feature.
OPERATION OVERVIEW:
There are 3 Main Modes of operation:
1) Standard Temperature Mode
2) Intelligent Temperature Stabilization™ (ITS™) Mode
3) Memory Mode
AquaTuff™ 352 THERMOMETER
OPERATION - Continued:
AquaTuff™ 353 THERMOMETER

67
2) When ITS MODE is active, the display will show “- -”
while the temperature is changing (stabilization
seek mode). The final stabilized temperature reading
will flash on the display when reached. The ITS
temperature reading will remain flashing on the
display until the probe is removed or temperature
changes by approximately 5°F(3°C). When the
temperature changes, the instrument will return to
ITS stabilization seek mode and “- -” will be
displayed until the next stabilized temperature is
reached and that temperature reading will flash on
the display.
3) The user has the option of storing the ITS
temperature reading in memory. To store ITS
temperature reading, press key to store
reading. The display will show reading number
“r001-r250” and store reading in memory. Up to 250
readings can be stored in memory.
4) To return to STANDARD TEMPERATURE MODE,
turn unit OFF and back ON or repeatedly press
key until both ITS and MEM icons are
turned off at top of display.
MEMORY MODE:
1) To view temperature readings stored in memory, turn
instrument ON and press key to select
MEMORY MODE. When active, MEM icon will
appear at top of LCD.
(NOTE: WITH NO
TEMPERATURE DATA IN MEMORY, INSTRUMENT
WILL NOT ENTER MEMORY MODE.)
2) To view temperature data, press key to scroll
forward or key to scroll backward through
temperature data. The display will show reading
number “r001-r250” followed by the temperature
recorded.
(NOTE: TO ACCESS FAST SCROLL
MODE, PRESS AND HOLD KEY OR
KEY AND DISPLAY WILL QUICKLY SEQUENCE
THROUGH TEMPERATURE READINGS.)
3) The temperature data is a cyclical data system.
When scrolling through data, the temperature
readings will cycle through all readings either forward
or backward and then repeat readings when either
the first or last reading in memory is reached.
4) To clear temperature readings in memory, press and
hold both the and keys at the same
time until “CLr” is shown on display.
5) To return to STANDARD TEMPERATURE MODE,
turn unit OFF and back ON or repeatedly press
key until both ITS and MEM icons are turned
off at top of LCD display.
USER TIP
When temperature readings are cleared
from memory, there is no facility to
restore deleted temperature data.
Ensure that temperature data is not needed
before clearing memory contents.
AquaTuff™ 353 THERMOMETER
ITS MODE - Continued:
AquaTuff™ 353 THERMOMETER
351 / 352 / 353 BATTERY REPLACEMENT
MEMORY MODE - Continued:
BATTERY REPLACEMENT:
1) Turn battery door knob counter-clockwise until
rotation stops. The arrow on battery door knob will
point towards unlock icon.
2) Pull battery door knob to remove battery door
assembly. Remove batteries.
3) Referring to battery polarity drawing on rear label,
install (2) AAA alkaline batteries as shown.
4) To install battery door assembly, ensure that battery
door knob is turned fully counter-clockwise and
arrow on battery door is pointed towards unlock
icon. Push upward on battery door assembly until
battery door knob is seated against housing. Rotate
battery door knob clockwise until rotation stops.
The arrow on battery door knob will point towards
lock icon.
TURN COUNTER-CLOCKWISE TO UNLOCK
TURN CLOCKWISE TO LOCK

89
351 / 352 / 353 SPECIFICATIONS 351 / 352 / 353 TROUBLESHOOTING
TEMPERATURE RANGES:
35100-K / 35200-K / 35300-K:
100° to 999°F ( 73° to 537°C)
35132 / 35135 / 35140 / 35141:
35232 / 35235 / 35240 / 35241:
35332 / 35335 / 35340 / 35341:
100° to 500°F ( 73° to 260°C)
ACCURACY:
35100-K / 35200-K / 35300-K:
With factory calibration, ±0.5F° (±0.3C°) over entire
measurement range at ambient temperatures
between 68° to 86°F (20° to 30°C)
35132 / 35140 / 35141:
35232 / 35240 / 35241:
35332 / 35340 / 35341:
With factory calibration, ±0.9F° (±0.5C°) Total
System Accuracy over entire measurement range
at ambient temperatures between 68° to 86°F
(20° to 30°C)
35135 / 35235 / 35335:
Surface probe temperature errors for draft free, flat,
clean oiled surfaces with 2.2 lbs.(1 Kg) of pressure
are typically within +2.7°F and 6.3°F (+1.5°C and
3.5°C) without thermostat recycling.
RESOLUTION:
35100-K / 35300-K:
35132 / 35135 / 35140 / 35141:
35332 / 35335 / 35340 / 35341:
Tenth degree (.1)
35200-K / 35232 / 35235 / 35240 / 35241:
Tenth degree / whole degree (.1/1), user selectable
BATTERY LIFE:
1800 Hours (2) AAA Alkaline batteries
AMBIENT TEMPERATURE LIMITS:
32° TO 122°F (0° TO 50°C)
TRACEABILITY:
We certify that this instrument has been calibrated
to temperature and/or electrical standards traceable
to the U.S. Department of Commerce National
Institute of Standards and Technology.
CALIBRATION:
Under normal operating conditions, the unit should
not require re calibration.
TROUBLESHOOTING
Our Customer Service Department is available
Monday through Friday 8:00 AM to 5:00 PM EST
at 800-835-5011.
1) Unit Does Not Turn On:
Batteries are installed incorrectly or dead.
Check batteries are installed according to picture on
rear label. Replace batteries.
2) Display Shows “Prob”: Probe is broken (Open
thermocouple see “Test for Broken Probe” below).
3) Test for Broken Probe: Pull the probe connector out
partially to expose the blade contacts. Place a metal
paper clip across connector blades to short contacts. If
instrument displays temperature, the probe is broken.
Replace Probe.
4) Battery Icon Appears on Display: Low battery.
Replace batteries.
5) Display Shows “bAtt” and Instrument Shuts Off:
Replace batteries.
6) Display Shows “LO” or “HI”: Temperature measured
is outside measurement range of instrument.
351 / 352 / 353 WARRANTY
WARRANTY: Cooper Atkins thermometers are backed
by a 5 year Instrument Warranty and 1 year Probe
Warranty on defects in workmanship and materials.