Atlantic Furniture KING E-65503 User manual

ASSEMBLY INSTRUCTIONS
( KING E-65503 )
Before assembling your Bed slat kit, please read through these
instructions carefully. Familiarize yourself with the different parts.
PARTS LIST
HARDWARE
Step 1
Step 2
SLAT KIT
CENTER RAIL
TALL CENTER LEG
SHORT CENTER LEG
3 SET
3 PCS
6 PCS
6 PCS
01
02
03
04
C
BCA
Please note that you will require a Phillips Head Screwdriver and an Allen wrench.
Allen wrench
1 1/2” Allen Screw - 12 pcs
Spare - 2 pcs
1 1/4” Wood Screw - 12 pcs
Spare - 2 pcs
Allen wrench - 1 pc
Spare - 1 pc
Assemble center leg (03 / 04) and center rail (02) using allen screw (A).
Tighten with the allen wrench (C).
Page 1 of 2Slat Kit King E-65503
Adult Assembly Allen Wrench
Phillips Head
Customer Supplied
Screw Driver
READY
SLAT KIT PLATFORM BED
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE
ALLEN WRENCH, ALLEN SCREW OR WOOD SCREW
ARE DAMAGED DURING ASSEMBLY.
Assemble bed frame according to bed assembly instructions.
If using mattress and foundation set the bed up low and use short center leg.
If using bed drawer choose the tall center leg.
Repeat for other center rail.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] 1-800-955-3726 / M-F 9:00-5:00 EST
02
A
AC
03 / 04
03 / 04
Adult Assembly
A
1 1/2” Allen Screw

Page 2 of 2
Step 3
Step 4
Attach center rail assemble (02) to slat kit (01)
Lay the slat kit (01) onto the bed.
Screw slat kit (01) to ledger strip, using wood screw (B).
Tighten with Phillips head screwdriver.
using allen screw (A), tighten with the allen wrench (C).
Repeat for section 2 and 3.
Adult Assembly
Adult Assembly
A
1 1/2” Allen Screw
C
Allen wrench
B
1 1/4” Wood Screw
SECTION 1
SECTION 2
SECTION 3
Be sure the space between slats is even.
Phillips Head
Customer Supplied
Screw Driver
Be sure to align slat kit evenly with both
ends of ledger strip.
Slat Kit King E-65503
01
01
01
02
02
02
A
A
B
A
A
A