Atlantic Furniture PRINTER STAND CROSS PANEL User manual

Page1of2
Assembling by Adult
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
Before attaching your Printer stand cross panels, please read through these
instructions carefully, familiarising yourself with the different parts.
PRINTER STAND CROSS PANEL
READY
PRINTER STAND CROSS PANEL
05272009
01
01
02
ab
c
PARTS LIST
01
02
CROSS SIDE PANEL
LOWER SHELF
a - Wooden dowel
b - Wooden dowel
c - Wood screw
4 pcs
4 pcs
4 pcs
2 PCS
1PC
Phillips head
screwdriver
Customer supplied
02
01
STEP 1 STEP 2
Install wood dowels (a)(b) into the locator holes
on (01)(02) as shown below.
b
b
b
b
a
a
1/4” X 1 1/4”
3/8” X 1 1/4”
1 1/4”
Repeat with the other panel.
c
01
Attach first side panel (01) to printer stand
aligning the dowels (a) with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (c).
c
note : panel in center

STEP 3
STEP 4
Attach second side panel (01) the same as the first but place the lower shelf (02) in
position by aligning the wood dowels (b) with the holes in the side panel.
Apply presure to eliminate any gap between the lower shelf and the side panel and
fix in place using wood screw (c).
Page2of2
05272009
01
02
b
b
c
c
c
PRINTER STAND CROSS PANEL