Atlantic Furniture Boston Headboard User manual

Adult assembly
Before assembling your headboard, please read through these
Page 1 of 2
Step 1
Instructions apply for bed sizes
PARTS LIST HARDWARE
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
READY
ASSEMBLE
TO
instructions carefully and familiarize yourself with the different parts.
HEADBOARD PANEL 1 PC
1
2
3
1 PC
1 PC
LEFT LEG
RIGHT LEG
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
F
E
D
Allen wrench - 1pc
Spare - 1pc
FOR BED FRAME ASSEMBLY follow assembly instructions included with your bed frame.
If you purchased a wood headboard to attach to metal bed frame, please refer to page 2.
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
JCB M6 X 35mm (1 3/8”) - 4 pcs
Spare - 1 pc
B
G
AWooden dowel - 4 pcs
Spare - 1 pc
Attach the left leg (2) and right leg (3) to headboard panel (1),
using wooden dowels (A) and JCB M6 X 35mm (B).
Tighten with the Allen wrench (G).
Adult assembly
Wood dowel
JCB M6 X 35mm
12
3
A
B
A
B
B
B
A
JCB M8 X 15mm ( 5/8") - 4 pcs
C
A
Assembly headboard to open bed frame

Adult assembly
Before assembling your bed, please read through these
Metal bed frames are sold separately from wood headboards. The hardware shown on this page
is supplied with your Atlantic wood headboard for attaching the bed frame to the headboard.
The metal bed frame is supplied with its own assembly instructions and hardware.
instructions carefully and familiarize yourself with the different parts.
ATTACHING HEADBOARD TO METAL BED FRAME
Attach the headboard assembly to the metal frame using JCB (D), flat washer (E),
and split washer (F) then tighten with Allen wrench (G), as shown below.
Congratulations!
Allen wrench M4
G
D
D
F
F
E
E
Instructions apply for bed sizes
JCB M6 X 1”
D
Flat washer
Split washer
E
F
Page 2 of 2
Your bed is now ready for use.
HEADBOARD
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Step 1

Before assembling your bed frame, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Barrel nut - 2 pcs
JCB M8 X 15mm ( 5/8") - 4 pcs
JCB M6 X 110mm (4 3/8”) - 2 pcs
Wood screw(1 1/4”) - 29 pcs
Spare - 1 pc
Spare - 2 pcs
OPEN BED FRAME
Page 1 of 2
PARTS LIST HARDWARE
FOOT RAIL
LEFT LEG
RIGHT LEG
SIDE RAILS
SLAT KIT
SLAT SUPPORT 1
SLAT SUPPORT 2
SUPPORT LEGS
1 PC
1 PC
1 PC
2 PCS
2 SETS
1 PC
1 PC
3 PCS
A
D
H
E
F
G
I
B
C
1
2
3
4
5
6
7
8Allen wrench M4 - 1pc
Allen wrench M6 - 1pc
JCB M6 X 25mm(1") - 6pcs
Cap nut - 6pcs
Allen Screw - 3pcs
Spare - 1pc
4
4
1
2
3
B
B
A
A
B
C
C
C
C
A
Attach the legs (2) and (3)
to foot rail (1), using
JCB M6 X 110mm (A) and
barrel nut (B).
Tighten with the Allen wrench M4 (I).
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Attach side rails (4) to the foot rail (1) as shown below using JCB M8 X 15mm (C).
Tighten with Allen wrench M6 (H).
Step 1
Step 2
READY
ASSEMBLE
TO
Adult assembly
JCB M6 X 110mm
Barrel nut
JCB M8 X 15mm

OPEN BED FRAME
READY
ASSEMBLE
TO
Page 2 of 2
Attach 2 slat kits (5) to the open bed frame as shown below using wood screws 1 1/4" (D).
Tighten with Phillips head screw driver. (customer supplied)
Step 6
E
F
D
D
F
F
Congratulations!
Your bed is now ready for use.
D
Wood screw 1 1/4"
5
5
6
7
E
E
F
F
E
E
If using a Trundle Bed attach slat supports off
center as shown.
E F
JCB M6 X 25mm Cap nut
5
5
D
Step 3 Step 4
Step 5
G
G
G
Allen screw
JCB M8 X 15mm
6
8
8
8
7
G
Attach open bed frame to the headboard
as shown below using 4 JCB M8 X 15mm bolts
that are supplied with your headboard.
Tighten with the Allen wrench M6 (E).
Attach support legs (8) to slat support 1 & 2 (6)(7) as
shown below. Using allen screw (G) tighten with
Allen wrench M4 (I).
Attach slat support 1(6) and slat support 2 (7) to the slat kit (5) as shown below
using JCB M6 X 25mm (E) and cap nut (F). Tighten with Allen wrench M4 (I).
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
2 legs at headboard section.
1 leg at footboard section.

Before assembling your bed drawer, please read through these
instructions carefully, familiarize yourself with the different parts.
BED DRAWER SET OF 2
Page 1 of 2
HARDWARE
A B C
JCB M6 X 1”( 25mm ) - 16 pcs Wood Screw X 1 1/4”( 32mm ) - 4 pcs
Spare - 1 pc Spare - 1 pc
E
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
Adult assembly
Adult assembly
PARTS LIST
01
02
03
HARDWARE 1 BOX
1 PC
2 PCS
DRAWER FACE
DRAWER SIDE
04
05
06
07
1 PC
2 PCS
1 PC
1 PC
DRAWER BACK
DRAWER BOTTOM
DRAWER MIDDLE
DRAWER CENTER SUPPORT
01
04
02
03
03
05
05
06
07
Step 1
A
C
JCB M6 X 1”
Allen wrench
03
03
02
A
A
Lay the drawer face (02) on smooth, flat surface so the drawer bottom (05) groove is facing upwards.
Attach the drawer sides (03) to drawer face (02) using JCB M6 X 1” (A). Align groove inside drawer
side with groove in drawer face. Tighten with Allen wrench (C).
GROOVE

Page 2 of 2
Step 2Step 2
Lastly, insert bed drawer to the bed as
shown below.
Step 3 Step 4
Congratulations!
Your bed drawer is now ready for use.
A
B
A
04
Adult assembly
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
A
B
C
JCB M6 X 1”
Wood Screw 1 1/4"
Allen wrench
05
05
06
06
07
07
05
05
Adult assembly
Guide the drawer bottoms (05) and drawer middle (06) in carefully so that they align inside grooves. Be sure
it fits fully into the face and side groove before attaching the drawer back (04).
Attach drawer center support (07) to bottom of drawer face using wood screw 1 1/4" (B). Tighten with
Phillips head screw driver. (Customer supplied)
BACK VIEW
B
B
B
Wood Screw 1 1/4"
Attach drawer back (04) to bed drawer
assembly as shown. Use JCB M6 X 1”(A).
Tighten with Allen wrench (C). Use wood
screws 1 1/4" (B) to finish attaching drawer
center support (07) to drawer back (04)
Tighten with Phillips head screw driver.
(customer supplied)
BED DRAWER SET OF 2