Atlantic Furniture WINDSOR HEADBOARD User manual

ASSEMBLY INSTRUCTIONS
Before assembling your headboard, please read through these
instructions carefully and familiarize yourself with the different parts.
Wood screw (8 X 1 1/4”) - 4 pcs
JCB M6 X 100mm (4”) - 4 pcs
Wooden dowel (10 X 30mm) - 4 pcs
Flat washer - 4 pcs
Split washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
Barrel nut - 4 pcs Allen wrench - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc Spare - 1 pc
WINDSOR HEADBOARD
Page 1 of 6
Windsor headboard & bed TF
PARTS LIST HARDWARE
A
B
C
F
G
E
DH
Step 1
Step 2
Step 3
HEADBOARD PANEL 1 PC
1 PC
1 PC
2 PCS
2 PCS
1
2
3
4
5
LEFT LEG
RIGHT LEG
SPACER BLOCK
SUPPORT BLOCK
4
4
2
34
A
B
B
B
B
A
Insert wooden dowels (A) to locator
holes on (1)(4) as shown below.
Attach spacer block (4) to the Legs (2)(3) as shown below, using wood screws (B) tighten with
Phillips head screwdriver (Customer supplied).
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, WOODEN DOWEL, WOOD SCREW, JCB , BARREL NUT OR WASHER ARE DAMAGED DURING ASSEMBLY.
Adult assembly
Wooden dowel
10 X 30mm
A
Adult assembly
Wood screw
B
Phillips head
screwdriver
Customer supplied
Instructions apply for sizes of bed
Twin > Full
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726 / M-F 9:00-5:00 EST
READY
ASSEMBLE
TO
Remove support block (5) from headboard panel (1) as shown below.
5
1
5

D
Step 3
Attach left, right legs (2)(3) to the headboard panel (1) as shown below. Using JCB (C) and
barrel nut (D) tighten with Allen wrench (H).
BACK VIEW
CD
D
D
C
C
C
1
2
3
Adult assembly
JCB M6 X 4”
Barrel nut
Allen wrench
C
D
H
Congratulations!
Your windsor headboard is now ready for use.
Adult Assembly
Page 2 of 6
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Windsor headboard & bed TF

ASSEMBLY INSTRUCTIONS
WINDSOR BED
BED SHOWN WITH OPEN FOOTRAIL
Adult assembly
Phillips head
screwdriver
Customer supplied
BED SHOWN WITH FLAT PANEL FOOTBOARD BED SHOWN WITH MATCHING FOOTBOARD
Instructions apply for sizes of bed
Twin > Full
Page 3 of 6
Before assembling your bed, please read through these
instructions carefully and familiarize yourself with the different parts.
READY
ASSEMBLE
TO
Windsor headboard & bed TF

PARTS LIST
01
02
02
03
04
04
05
04
04
Step 1 Attach the long rail (04) to the headboard (02) using bed hook as shown below.
Using the upper set of pins
when using only mattress,
and using the lower set of
pins if using both box spring
and mattress.
Adult assembly
BED SHOWN WITH OPEN FOOTRAIL
Page 4 of 6
01
01
01
02
03
04
05
HARDWARE
HARDWARE
HARDWARE
HEADBOARD
FOOTBOARD
LONG RAILS
SLAT KIT
BOX 1
BOX 2
BOX 3
BOX 4
Windsor headboard & bed TF

Step 2
Step 3
Attach the long rail assemblies (04) to the footboard (03) using bed hook as shown below.
04
03
04
Adult assembly
For slat kit assembly, follow assembly instructions included with slat kit.
Lastly, lay slat kit (05) onto the bed.
Congratulations!
Your windsor bed is now ready for use.
05 Adult assembly
Phillips head
screwdriver
Customer supplied
BED SHOWN WITH OPEN FOOTRAIL
BED SHOWN WITH OPEN FOOTRAIL
Page 5 of 6
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
PLATFORM BED - TALL HEIGHT TRADITIONAL BED - LOW HEIGHT
Windsor headboard & bed TF
05

ASSEMBLY INSTRUCTIONS
WINDSOR HEADBOARD
Adult assembly
PARTS LIST
01
02
HARDWARE
HEADBOARD
Step 1
Congratulations!
Your windsor bed is now ready for use.
JCB M6 X 1”
E
ALLEN WRENCH
H
FLAT WASHER
SPLIT WASHER
F
G
02
01
E
E
G
G
F
F
Instructions apply for sizes of bed
Twin > Full
Page 6 of 6
attach to metal frame sold separately
Before assembling your bed, please read through these
instructions carefully and familiarize yourself with the different parts.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Windsor headboard & bed TF
Attach the headboard assembly (02) to the metal frame using JCB (E), flat washer (F),
and split washer (G) then tighten with Allen wrench, as shown below.