Atlantic Furniture LEXI User manual

Page 1 of 3
Adult Assembly
ASSEMBLY INSTRUCTIONS
Before assembling your Printer stand, please read through these
instructions carefully. Familiarize yourself with the different parts.
LEXI PRINTER STAND
READY
LEXI PRINTER STAND
Hexagon Wrench
AE
D
BF
C
Flat washer - 8 pcs Wooden Dowel 3/8 X 1 1/4” - 4 pcs
Wooden Dowel 1/4” X 1 1/4” - 4 pcs
Spare - 2 pcs Spare - 1 pc
Spare - 1 pc
Hexagon nut - 8 pcs Wood Screw - 6 pcs
Spare - 2 pcs Spare - 1 pc
Hexagon wrench - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE HEXAGON NUT, WASHER, WOODEN DOWEL
OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
PARTS LIST
01
02
03
04
TOP PANEL 1 PC
4 PCS
2 PCS
1 PC
LEG
SIDE PANEL
LOWER SHELF
01
02 04
03
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] 1-800-955-3726 / M-F 9:00-5:00 EST

F
note : panel in center
Page 2 of 3
Adult Assembly
Adult Assembly
Install wooden dowels (D)(E) into the locator
holes on (03)(04) as shown below.
Repeat with the other panel.
Attach first side panel (03) to printer stand
aligning the dowels (D) with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (F).
E
F
E
E
E
D
D
02
03 04
03
02
02
02
01
A
B
02
A
B
AA
B
B
STEP 1
STEP 2 STEP 3
Attach the legs (02) to the top panel (01) as shown below using flat washers (A) and
hexagon nuts (B), tighten with hexagon wrench (C).
D
LEXI PRINTER STAND

Attach second side panel (03) the same as the first but place the lower shelf (04) in
position by aligning the wooden dowels (E) with the holes in the side panel.
Apply presure to eliminate any gap between the lower shelf
and the side panel and fix in place using wood screw (F).
E
E
F
F
F
F
F
Page 3 of 3
Adult Assembly
Adult Assembly
04
03
Congratulations !
Your Printer stand is now ready for use.
We recommend that you recheck that all screws are tight,
and that all parts are secure before use and periodically to ensure lasting Safety.
STEP 4
STEP 5
LEXI PRINTER STAND