Atlantic SLAT KIT FULL LOWER BUNK User manual

ASSEMBLY INSTRUCTION
( FULL E-65301 )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST
Step 1
Step 2
SLAT SECTION
SUPPORT RAIL
CENTER LEG
2 SET
2 PCS
4 PCS
01
02
03
C
Please note that you will require a Phillips screwdriver and an Allen wrench.
Allen wrench
Assemble center legs (03) and support rail (02).
Assemble bed frame according to assembly instructions.
Using Allen screw (A).
Tighten with the Allen wrench (C).
Repeat for other support rail.
Page 1 of 2
02
A
AC
HARDWARE
ABC
1 1/2” (40mm) Allen screw - 8 pcs
Spare - 1 pc
1 1/4” Wood screw - 8 pcs
Spare - 2 pcs
Allen wrench - 1 pc
Spare - 1 pc
01
02
03
03
03
03
SLAT KIT FULL LOWER BUNK
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN SCREW,
OR WOOD SCREWS ARE DAMAGED DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
A
1 1/2” Allen screw
READY
ASSEMBLE
TO
PO :
Adult assembly

Page 2 of 2
Step 3
Step 4
Lay the slat section (01) onto the
bed. Attach support rail
assembly (02) to the slat section (01).
Using Allen screw (A),
tighten with the Allen
wrench (C).
Repeat for section 2.
Screw slat section (01) to side rail, using wood screw (B).
Tighten with Phillips screwdriver.
B
B
A
01
02
01
01
C
A
1 1/2” Allen screw
C
Allen wrench
B
1 1/4” Wood screw
SECTION 1
SECTION 2
Phillips head
screwdriver
Customer supplied
Be sure the space between slats is even.
If using a Trundle Bed attach support rail assembly
off center as shown. Repeat for section 2.
TRUNDLE BED
Be sure to align slat section evenly with both
ends of side rail.
A
A
A
A
SLAT KIT FULL LOWER BUNK
Adult assembly
Adult assembly