Atmel AT90USB162 User manual

 
USB MICROCONTROLLERS
8-bit Microcontrollers
with Integrated USB Controller
Ready to Go in No Time
Atmel®’s family of 8-bit microcontrollers supports a wide range of USB applications: high-end
keyboards, mice, phone accessories, toys, serial adapters and industrial equipment.
An on-chip bootloader permits very quick firmware download from a PC, without using a parallel
programmer or dedicated hardware.
Nonvolatile memory stores configuration parameters enabling the system to be instantly operational,
even without connection to a PC.
8051 solutions offer 8KB to 64KB of Flash with up to 4 MIPS and USB function. They also include 5
ROM variants for cost reduction when code is fixed.
AVR®solutions offer 8KB to 128KB of Flash with up to 16 MIPS, USB function and On-The-Go for
dual role host or function.
Key Features & Benefits
 Popular and powerfull 8-bit
architectures 8051 and AVR
 Extensive Library of USB reference firmware
 USB Certification
 Flash In-System Programming
 Factory Programmed USB boot-loader
 Choice of serial interfaces and
analog peripherals
 Large range of memory sizes
 Industrial Grade and Quality
 Low power consumption
Applications
 Keyboard and mice
 Gamepads and Joysticks
 Phone accessories
 Toys
 Serial adapters
 Industrial equipment
 Security Keys
 POS Terminals
 NFC and RFID readers
 Power supplies and chargers

8-BIT MICROCONTROLLERS WITH
INTEGRATED USB CONTROLLER Everywhere You Are®
USB Everywhere
After conquering computers and peripherals, USB is gaining momentum in consumer products and
industrial equipment. Data storage, data transfer and product configuration are key applications driving
this move.
On-The-Go (OTG) now allows devices to communicate without PC intervention. With the suitable device
class libraries OTG can:
• support various targeted products
• negotiate host or device role with another OTG device
• connect to any PC as a USB device
Human Interface Devices form by far the most popular class of USB
peripherals. New pointing and input devices gain in accuracy with full-
speed (12 Mbit/s), which is provided by all Atmel USB microcontrollers.
Atmel USB microcontrollers also support isochronous transfers and double
buffering for audio streaming. Last but not least, Atmel controllers with seven endpoints
can merge several USB functions in one composite device, thus saving space and components.
USB Self-Programming
Instant connection: programming on demand
Atmel USB Flash microcontrollers’ on-chip bootloader can be used for self-programming at any step of the
product life cycle: development, production, after sales support and in day to day use by the end user.
Dedicated on-chip hardware secures the user firmware but can also force the application to reprogram
when it has lost control.
Standard Flash MCU
USB to SPI
or
USB to RS232
adapter
USB Flash MCU
USB
12 Mbps

USB Software Library
www.atmel.com
A library of reference firmware demonstrates the most popular USB device classes and helps proliferate
applications without the need for custom driver development: Human Interface Device class for mice,
keyboards and industrial equipment I/Os; Mass storage device class to share files with PCs; Communication
Device Class for data transfer and UART emulation.
AVR Tools
8051 Tools
AT89C5132 Development Kit
P/N: AT89DVK-04
8 & 16KB Flash Starter Kit
P/N: ATSTK526
Device Class Endpoint /
Pipe*
AVR 8051
Host (KB) Function (KB) Function (KB)
Device Firmware Update 1 7 4 3
Human Interface Device 1-3 4 3 3
Mass Storage 3 7 5 6
Communication Device Class 4 8 7 5
Audio 2 3 2.5
Fingerchip Bulk 2 4
Evaluation Kit Atmel: AT90USBKEY, EVK525 Mass Storage Evaluation Kit
Starter Kit Atmel: STK525, STK526
Emulator Platform Atmel: JTAGICE mkII
In-System Programming Atmel: FLIP software, AVRISP mkII, JTAGICE mkII, AVR Dragon
Flash Device Programmers Atmel: STK500 with STK501 or STK526
Compilers CodeVision™, GCC-AVR, IAR®,
Starter et Development Kits Atmel: AT89STK-05, AT89STK-10, AT89DVK-04
Emulator Ceibo, Hitex, Nohau, Phytec, Signum
In-System programming Atmel: FLIP software
Flash Device Programmers Ad vantech®, Hi-Lo Systems, Elnec, BP Microsystems, Data I/O®, etc
Compilers Crossware®, Hi-Tech, IAR®, Keil™, Raisonnace® , SDCC, Tasking®
AT89C5130A/31A Starter Kit
P/N: AT89STK-05
Mass Storage
Starter Kit - P/N: AT89STK-10
64 & 128KB Flash Starter Kit
P/N: ATSTK525
USB Demo Kit
P/N: AT90USBKEY
*Including one IN/OUT control endpoint/pipe

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in con-
nection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALES LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions
at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive
applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Headquarters
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: [phone]
Fax: [phone]
International
Atmel Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimhatsui
East Kowloon
Hong Kong
Tel: [phone]
Fax: [phone]
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309, 78054
Saint-Quentin-en-
Yvelines Cedex
France
Tel: [phone]
Fax: [phone]
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: [phone]
Fax: [phone]
Product Contact
Atmel Nantes
La Chantrerie
BP 70602
44306 Nantes cedex 3
France
Tel: [phone]
Fax: [phone]
Literature Requests
www.atmel.com/literature
Website
www.atmel.com
Hotline [e-mail]
© 2007 Atmel Corporation.
All rights reserved.
Atmel®, logo and combinations
thereof, Everywhere You Are®, AVR®
and others are registered trademarks
of Atmel Corporation or its subsidiar-
ies. Other terms and product names
may be the trademarks of Atmel or
others.
Rev.: 4036F-AVR-03/07/4000
Serial Interfaces
Status a)
Flash (KB)
ROM (KB)
ISP & Self Programming
EEPROM (Bytes)
RAM (Bytes)
I/O Pins
UART/USART
SPI
TWI (I2C compliant)
USB 2.0 Host/OTG
USB Full Speed
USB Low Speed
USB DPRAM (bytes)
USB Endpoints
PS2
I2S
8-bit Timers
16-bit Timers
PWM (channel)
Comparator
A/D Converter (channel)
Analog Gain Stage
POR
PFD
Memory Interfaces
(IDE, MMC, SD, CF, SM)
JTAG/DebugWIRE
Vcc (V)
Max. Frequency (MHz)
Max. Speed (MIPS)
Packages
Temperature Range
AT90USB82 I 8 USB/SPI 512 512 22 1 1 Y 176 5 Y 1 1 3+1 Y Y Y D 2.7 - 5.5 8-16 8-16 QFN32 -40°C to +85°C AT90USB162 P 16 USB/SPI 512 512 22 1 1 Y 176 5 Y 1 1 3+1 Y Y Y D 2.7 - 5.5 8-16 8-16 TQFP32, QFN32 -40°C to +85°C AT90USB646 P 64 USB/SPI 2K 4K 48 1 1 1 Y Y 832 7 2 2 6+2 Y 8 Y Y Y J 2.7 - 5.5 8-16 8-16 QFN64 -40°C to +85°C AT90USB647 P 64 USB/SPI 2K 4K 48 1 1 1 Y Y Y 832 7 2 2 6+2 Y 8 Y Y Y J 2.7 - 5.5 8-16 8-16 TQFP64, QFN64 -40°C to +85°C AT90USB1286 P 128 USB/SPI 4K 8K 48 1 1 1 Y Y 832 7 2 2 6+2 Y 8 Y Y Y J 2.7 - 5.5 8-16 8-16 QFN64 -40°C to +85°C AT90USB1287 P 128 USB/SPI 4K 8K 48 1 1 1 Y Y Y 832 7 2 2 6+2 Y 8 Y Y Y J 2.7 - 5.5 8-16 8-16 TQFP64, QFN64 -40°C to +85°C AT89C5130A P 16 USB 1K 1280 18/34 1 Y Y Y 1356 7 3+PCA 5 Y Y 2.7 - 5.5 48 4 PLCC52, QFN32,
VQFP64 -40°C to +85°C
AT89C5131A P 32 USB 1K 1280 18/34 1 Y Y Y 1356 7 3+PCA 5 Y Y 2.7 - 5.5 48 4 PLCC52, QFN32
VQFP64, SO28 -40°C to +85°C
AT89C5132 P 64 USB 2304 44 1 Y Y 168 4 Y 2 2 Y 2.7 - 3.6 20 3.3 VQFP80, Die -40°C to +85°C AT83C5134 I 8 1280 18 1 Y Y Y 356 6 3+PCA 5 Y Y 2.7 - 3.6 32 4 QFN32 -40°C to +85°C
AT83C5135 I 16 1280 18 1 Y Y Y 356 6 3+PCA 5 Y Y 2.7 - 3.6 32 4 QFN32 -40°C to +85°C
AT83C5136 I 32 1280 18/34 1 Y Y Y 356 6 3+PCA 5 Y Y 2.7 - 3.6 32 4 QFN32, VQFP64
SO28, Die -40°C to +85°C
AT83EC5136 I 32 512 1280 34 1 Y Y Y 356 6 3+PCA 5 Y Y 2.7 - 3.6 32 4 QFN48 -40°C to +85°C
AT83EI5136 I 32 32K 1280 34 1 Y Y Y 356 6 3+PCA 5 Y Y 2.7 - 3.6 32 4 QFN48 -40°C to +85°C
USB 8-bit Microcontrollers Offering
a) I: Device under Introduction, P: Product in Full Production. Please contact your local sales for details. CF: CompactFlash, IDE: Integrated Drive Electronics, MMC: MultiMedia Card, PFD: Power Fail Detect, POR: Power On Reset, PWM: Pulse Width Modulation, SD: Secure Digital, SM: Smart Media, SPI: Serial Peripheral Interface, USB: Universal Serial Bus.