Atmel AT88CK109BK8 Installation manual

8742A–CRYPTO–3/11
Atmel CryptoAuthentication Starter Kit
Atmel AT88CK109BK8
Hardware User Guide
Features
Two 8-lead SOIC sockets
Supports the Atmel ATSHA204 CryptoAuthentication IC
Supports communication protocols
-I2C
-SWI (Single wire interface)
Power LEDs
Contents
Atmel AT88CK109BK8 daughterboard
1. Introduction
Atmel®AT88CK101BK8 is a daughterboard that interfaces with a mcu board via a 10-pin header. The
daughterboard has two 8-pin SOIC sockets which can support HOST and CLIENT development with an
Atmel ATSHA204 device. This kit uses a modular approach, enabling the daughterboard to connect
directly to an STK series AVR development platform to easily add security to applications. An optional
adapter kit is also available when the 10-pin header on the daughterboard requires a different pinout. The
AT88CK109BK8 is sold with the Atmel AT88Microbase to form the Atmel AT88CK109STK8 starter kit. The
AT88Microbase AVR base board comes with a USB interface that lets designers learn and experiment on
their PCs.
Figure 1-1. Atmel AT88CK109BK8 daughterboard
Pin 1 indicator
Standoff hole

2Atmel AT88CK109BK8 Hardware User Guide
8742A–CRYPTO–3/11
1.2. Atmel AT88CK109STK8 starter kit
The AT88CK109BK8 is sold with the AT88Microbase to form the AT88CK109STK8 starter kit. For
additional information on the AT88Microbase, see Atmel doc8723A, AT88Microbase Hardware User Guide.
Figure 1-2. The AT88CK109BK8 adaptor board with the Atmel AT88Microbase
2. Board configuration
2.1. 10-pin interface header
Table 2-1. 10-pin interface header
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
VCC
GND
NC
NC
NC
NC
NC
NC
SDA
SCL
Note: I2C Pins: SCL, SDA
2.2. Supports 8-lead SOIC interface with the following pinout
Figure 2-1. Pinout configuration
NC
NC
NC
GND
1
2
3
4
8
7
6
5
8-lead SOIC VCC
NC
SCL
SDA

Atmel AT88CK109BK8 Hardware User Guide 3
8742A–CRYPTO–3/11
2.3. AT88CK301ADP adapter kit
An optional adapter kit is also available when the 10-pin header on the daughterboard requires a different
pinout.
Figure 2-2. Atmel AT88CK301ADP adapter kit
Table 2-2. 10-pin squid cable
10-pin squid cable
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
black
white
gray
purple
blue
green
yellow
orange
red
brown

4Atmel AT88CK109BK8 Hardware User Guide
8742A–CRYPTO–3/11
3. References and further information
Schematics, Gerber files, bill of materials (BOM), development and demonstration software are
conveniently downloadable from the Atmel website at www.atmel.com/cryptokits.
4. EVALUATION BOARD/KIT IMPORTANT NOTICE
This evaluation board/kit is intended for ENGINEERING, DEVELOPMENT, DEMONSTRATION or
EVALUATION PURPOSE ONLY. It is not a finished product and may not (yet) comply with some or
any technical or legal requirements that are applicable to finished products, including, without limitations,
directives regarding electromagnetic compatibility, recycling (WEEE), FCC, CE or UL (except as may be
otherwise noted on the board/kit). Atmel®supplied this board/kit “AS IS,” without any warranties, with
all faults, at the buyer’s and further users’ sole risk. The user assumes all responsibly and liability for
proper and safe handling of goods. Further, the user indemnifies Atmel from claims arising from the
handling or use of goods. Due to open construction of the product, it is the user’s responsibility to take
any and all appropriate precautions with regard to electrostatic discharge and any other technical or legal
concerns.
EXCEPT TO THE EXTENT OF INDEMNITY SET FORTH ABOVE, NEITHER USER NOR ATMEL SHALL BE
LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or
relating to any machine, process, or combination in which such Atmel product or services might be or are
used.
Mailing Address: Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131

Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: [phone]
Fax: [phone]
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel: [phone]
Fax: [phone]
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Tel: [phone]
Fax: [phone]
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel: [phone]
Fax: [phone]
© 2011 Atmel Corporation. All rights reserved. / Rev.: 8742A–CRYPTO–3/11
Atmel®, logo and combinations thereof, CryptoAuthentication™ and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other
terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No lic ense, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in
connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATM EL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF ME RCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel
makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and rese rves the right to make changes to specifications and products descriptions at any time without
notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise , Atmel products are not suitable for, and shall not be used in, automotiv e applications. Atmel
products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life .

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Atmel:
AT88CK301ADP