ATMOSCLEAN Prodigy Compact User manual

USER MANUAL
&QUICK START GUIDE
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS

1
PLEASE NOTE that the Prodigy or Prodigy+ machine
you’ve received has been specifically calibrated for
compatibility with Atmosclean fluids.
For your safety, please only refer to the directions and
settings arranged in this manual as it is specifically
designed for Atmosclean products only.
If you have any questions, please feel free to contact us.
INDEX
Unpacking & Inspection.............................................................................Page 2
Dimensions & Overview.............................................................................Page 2
Safety Information.....................................................................................Page 3
Purge Mode / Fog Output..........................................................................Page 4
Quick Start - Vehicles.................................................................................Page 5
Quick Start - Homes & Commerical...........................................................Page 6
Warranty Information................................................................................Page 7
THANK YOU FOR YOUR PURCHASE!

7in
19⁄ in
9⁄ in
120V
Rated voltage: 120vac
Frequency: 50 / 60hz
Power consumption: 1200W
Circuit breaker: 15A 250V
220V
Rated voltage: 220vac
Frequency: 50 / 60hz
Power consumption: 1200W
Breaker: 7A 250V
93⁄4 in
213⁄4 in
10 in
120V
Rated voltage: 120vac
Frequency: 50 / 60hz
Power consumption: 1500W
Circuit breaker: 15A 250V
220V
Rated voltage: 220vac
Frequency: 50 / 60hz
Power consumption: 1500W
Breaker: 7A 250V
DIMENSIONS & OVERVIEW
Atmosclean Vapor Sanitizing System - COMPACT
Atmosclean Vapor Sanitizing System - PLUS



















 




Upon receiving your Atmosclean Prodigy or
Prodigy+, open the package and carefully
remove contents to verify all components are
accounted for, and have been shipped and
handled with care. If any parts are damaged or
missing, notify your Atmosclean dealer.
Packing list includes, but is not limited to:
• (1) Prodigy (Compact) or Prodigy+ (Plus)
• (1) Power Cable
• (1) 5 Liter Container
• (1) Quick Connect Hose Set Up
• (1) Quart of Atmosclean Sanitizing Solution
UNPACKING & INSPECTION
2

SAFETY INSTRUCTIONS
Please read the following information very carefully before operating your machine. This article contains important
details regarding set up, usage, and maintenance. Failure to abide by all warning labels and instructions may
result in personal harm, machine malfunction, and a void in warranty.
Prior to connecting power to your machine, verify the machine’s operating voltage matches your provided
voltage, failure to do so may cause internal damage and a void in warranty.
Allow at least 6 inches of space around the machine during operation to avoid overheating.
Keep the machine dry and away from any moisture and flammables.
Use only Atmosclean Fluids. Use of any other fluids may be harmful and will result in a voided warranty. Always
use caution when pouring fluid and avoid any contact with hands and eyes. If contact occurs, rinse thoroughly. If
you experience irritation seek medical advice. Refer to SDS for proper handling.
Once the unit is properly powered and operating, beware of hot surface. Do not set items on top of the machine
and avoid contact with output nozzle. Always disconnect power when not in use.
Vapor may cause irritation, discomfort, headaches, or other allergic symptoms. Avoid inhaling when possible.
Wear personal protective equipment if exposure is unavoidable. Mask, gloves, and safety goggles are
recommended.
Vapor can set o fire alarms. If smoke detectors are linked to local fire department, contact your fire system
provider and fire department to avoid false alarm responses.
This product is to be used in addition to regular cleaning and sanitizing methods, not as a substitute. Atmosclean
is a preventative maintenance solution to inhibit pathogen growth.
3
The vapor machine you have received has been specifically calibrated for use with Atmosclean Fluids only.
The use of any other fluid, or cleaning chemical can result in harmful conditions. Atmosclean manufacturer,
distributors, and dealers disclaim any liability for the misuse of this product.

EMPTY FLUID TANK - PURGE MODE
Your machine is equipped with a low fluid sensor that prevents the machine from operating with an
empty fluid container. If your machine happens to run out of fluid, follow the steps listed below.
IMPORTANT: During Purge Mode, vapor will exit the output nozzle for up to 30 seconds. For your
safety, personal protective equipment is recommended during operation.
“ PURGE MODE”
The machine will begin to purge fluid, and vapor will release from the
output. Once the cycle is complete, you are ready to Atmosclean™.
“ UH OH, EMPTY FLUID TANK!”
Disconnect the container, and refill with Atmosclean Vapor Sanitizing
Solution™.
“ HOLD ENTER TO START PUMP”
Reconnect the fluid container using the quick dissonnect, then press
and hold the enter button for three seconds.
STEP 1
STEP 2
STEP 3
4
FOG OUTPUT: The “fog output” determines the volume of vapor dispersed during
operation.
Your machine comes set at 50% output from the factory, it is not reccommended to
go any lower than 50%. However, for bigger spaces, you may need to increase the
output. To increase the volume of vapor, scroll through the menu (far le button)
until you see “fog output”, and use the up arrow to select your output percentage.
When finished press the enter button to confirm your selection.

VEHICLES - QUICK START GUIDE
Place the machine on the passenger floor or the middle of the backseat with the output
nozzle facing the front of the vehicle. Ensure all windows and doors are closed and turn on
the vehicle’s air recirculation.
Ensure the fog output percent is set to 50%, press the enter button, and gently shut the car
door. Allow the machine to run continuously for 10 minutes.
Remove the container from the machine and fill with Atmosclean Sanitizing Solution™.
Replace the container and secure the fluid hose using the quick connect.
Connect the machine to the proper rated power supply outside of the vehicle, use an
extension cord if necessary. Turn the switch on the back of the machine to “on”. Allow up to
10 minutes for the machine to preheat. The screen will notate when the machine is ready.
Aer 10 minutes, disconnect the power cord from the outlet. Allow the vapor to settle for 15
minutes. Aer 15 minutes, open the doors to evacutate the remaining vapor. Avoid direct
inhilation of any remaining vapor.
Congratulations! Your vehicle is oicially Atmosclean!™
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Please take precautions when using Atmosclean Sanitizing Systems. For safety instructions, please refer to page 3.
If your OLED Display reads “UH OH, EMPTY FLUID TANK!”, please follow the steps on page 4. Before proceeding with
the following steps, ensure no person or pet is in the vehicle. During the process, vapor may seep out of the vehicle.
For your safety we recommend wearing personal protective equipment and performing the following steps outdoors
or in a well ventilated area.
5

HOMES/COMMERICAL - QUICK START GUIDE
Remove the container from the machine and fill with Atmosclean Sanitizing Solution™.
Replace the container and secure the fluid hose using the quick connect.
Ensure the fog output is set to at least 50%, press the enter button, and vacate the space.
Allow the machine to run continuously for 20 minutes, or until visibility is limited to 4.
Place the machine in a room that has an air return vent. Make sure all windows and doors
are closed and the air conditioner is operating or the furnace fan is set to “on”.
Connect the machine to the properly rated power supply outside the home, use an
extension cord if neccesary. Turn the switch on back of machine “On”. Allow up to 10
minutes for machine to preheat, the percentage is viewable on the OLED display.
When finished, disconnect the power cord from the outlet. Allow the vapor to naturally
settle and naturally dissipate for up to 1 hour before re-entering space. Avoid direct
inhilation of any remaining vapor.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
WARNING! Atmosclean vapor will trigger most smoke detectors. For more info on safety precautions, please see page 3.
If your OLED Display reads “UH OH, EMPTY FLUID TANK!”, please follow the steps on page 4. Before proceeding with the
following steps, ensure no person or pet is in the home. For your safety, we recommend wearing personal protective
equipment.
6
Congratulations! Your space is oicially Atmosclean!™

7
WARRANTY TERMS
The warranty is valid to the original purchaser only and covers all internal components and required labor
for the first 2 years from date of purchase. Atmosclean and approved dealers will still perform repairs
and regular maintenance outside of the 2 year warranty at the owner’s expense. Timeline of repair is at
the discretion of Atmosclean and approved dealers. All repairs must have an RMA (Return Merchandise
Authorization) number clearly noted on the box prior to returning for service, any packages without an RMA
will not be accepted. To schedule repairs and receive a RMA, please email [e-mail] or
call 877.578.6577. The customer is responsible for all shipping costs.
Insignificant deviations of the regular production quality does not guarantee repair or replacement rights.
Moreover, the warranty does not cover faults or defects caused by misuse or negligence; e.g. improper
ventilation, dropping machine, exposure to moisture, etc. The use of any fluids other than Atmosclean Fluids
in your calibrated Prodigy or Prodigy+ is strictly prohibited, failure to comply will void warranty. Moreover,
tampering with the internals and modifications can cause harmful conditions and will result in void of
warranty. All service is to be done by Atmosclean authorized technicians only. Atmosclean is not liable for
repair delays due to fire, strikes, or causes beyond our control.
To inquire about repairs, email [e-mail] or call 815.207.1408
Atmosclean reserves the right to alter the following terms and conditions if contingencies develop which were not apparent at the time of sale.
QUESTIONS OR COMMENTS? PLEASE CONTACT US:
Atmosclean, Inc.
1350 W Washington St.
West Chicago, IL 60185
[e-mail]
815.207.1408