Minimum (MIN) Maximum (MAX) Function
The MIN/MAX mode allows the user to view only
the lowest (MIN) or highest (MAX) readings.
Press the MIN/MAX button once and “MIN”
appears on the display. The LCD is now
displaying the minimum reading of the selected
parameter in the display. The display will not
change until a lower reading is registered.
Press the MIN/MAX button again and “MAX”
appears on the display. The LCD is now
displaying the maximum reading of the selected
parameter in the display. The display will not
change until a higher reading is registered.
Press the MIN/MAX button again to exit the
MIN/MAX mode, and the “MAX” or “MIN” icon will disappear.
Note:While powering on the meter per time, it restarts recording Minimum and
Maximum and the recordings don’t stop until the meter is turnned off.
Backlight
Press to turn on the backlight. To turn the backlightoff, press again.
Automatic Power OFF
The meter has a default setting that automatically
shuts the meter off after 10 minutes (indicated by
the symbol on the display). This battery saving
feature can be disabled. To disable the auto power
off function, simply press and hold the HOLD
button while powering on. The symbol will not
appear when auto power off has been disabled. The
meter will revert to the default auto-off mode when
powered off.