AudioBahn AVM156TP User manual

5.6" TFT-LCD COLOR MONITOR
HEAD REST PACKAGE
AVM156TP

AVHK1 Mounting

Headphone & Controls
9
EXPLAINATION OF CONTROLS (See Fig. 1)
1. IR sensors, to receive IR light from transmitter.
2. Power on/off switch.
3. Volume control knob.
Figure 1
Pull out the ear pad and battery cover, then insert two AAA batteries
into the left and the right battery compartments, ensuring that the
polaritly is correct
Put the headphone on, then turn the on/off switch to the on position.
Then adjust the volume by turning the volume control knob. (Make
sure that your audio source and transmitteris on).
FIGURE 2
OPERATION
BATTERY INSTALLATION (See Fig. 2)

AVHK1 Mounting Instructions
10
Slide Monitor onto the bracket, then tighten
bracket to keep monitor in place.(Fig.2)
Adjust the legs of the bracket to fit your headrest (Fig.1)
Then replace headrest to keep monitor bracket
in place (Fig.3)
Figure 1
Figure 2
Figure 3

TECH NOTES