Audiolab 8200Q User manual

8200Q

8200Q
VERSION HISTORY
Rev
V01
Date Update Content
2010.10.18 First Version
V02 2011.06.10 Second Version

CONTENT
8200Q
Introduction
ia
screen of Bottom
Assembly Parts List
Electronic Parts List
/
Specification
Assembly Sketch
Schematic Diagram
Wir ng Di gram
Silk Top
Maintenance Alignment Procedure
1
2
3
4
5
6
7
8
9
.
.
.
.
.
.
.
.
.
1
2
3
4-15
16
17-20
21
22-23
24-29

INTRODUCTION
1
8200Q
No part of this document may be reproduced or transmitted in any form or by any means,electronic or
mechanical, for any purpose, without the express written permission of International Audio Group
Limited (IAG)
This manual is for the exclusive use of IAG, its approved distributors and approved UK service agents.
No part of this manual shall be transferred to any other party without the express written permission of
IAG.
It is the responsibility of the user to ensure that all the information contained in this manual is current.
Notification for new issues of this manual and minor updates will be given via the IAG web-site or on
request.
This manual has been prepared with the greatest care, it is intended for information only and no liability
shall be accepted for errors or changes to specification.
For further service information, parts lists and updates, please contact our web-site at
www.international audio group.com .
2011 International Audio Group Limited. All rights reserved.
C

SPECIFICATION
2
8200Q
Inputs: Gain and Sensitivity CD, TUNER, AUX, VIDEO, TAPE 1, TAPE 2: IMPEDANCE: 20kΩ
GAIN: Adjustable by 3dB steps 0 -15dB., corresponding to
SENSITIVITY (nom.): 100mV, 140mV, 200mV, 283mV, 400mV,
562mV
HEADPHONES: Gain adjustable 18dB - 33dB in 3dB steps
Signal To Noise Ratio (IHF,rel.0.5V
output) Any input, any gain setting: 97dB
Headphones: 80 dB
Frequency Response 10 Hz-20 kHz ±0.2 dB: 1Hz-75 kHz -3 dB
Total Harmonic Distortion&Noise Less than 0.007%ref 7.7V rms, 20Hz - 20kHz
Channel Balance Within1dB
Channel Separation Better than100 dB@1 kHz any input, any setting
Pre-amp Output Max. Output >7.7 V RMS(20dBm); Output impedance 75Ω
Headphone Output >7.7Vrms;100 (for headphones 8 -2 k impedance)
Record Output VIDEO OUT, TAPE 1 OUT, TAPE 2 OUT:Gain 0 dB (x1); 100Ω
Muting Attenuation>63 dB, controlled automatically
Operating Temperature Range 10-35 °C
Power Requirements(Depending on
Region) 50-60Hz 100V, 110-120V, and 220-230V models available
Maximum Power Consumption: 25 VA
Dimensions (W×H×D) 445×74×335mm- including feet, terminals and controls
445 ×64×302mm-excluding feet, terminals and controls
Weight Net: 6 kg
Shipping: 7.3 kg

ASSEMBLY SKETCH
3
8200Q

SCHEMATIC DIAGRAM
8200Q
4

SCHEMATIC DIAGRAM
5
8200Q
8200Q-Mainboard-P2/10

SCHEMATIC DIAGRAM
6
8200Q
8200Q-Mainboard-P3/10

SCHEMATIC DIAGRAM
7
8200Q
8200Q-Mainboard-P4/10

SCHEMATIC DIAGRAM
8
8200Q
8200Q-Mainboard-P5/10

SCHEMATIC DIAGRAM
9
8200Q
8200Q-Mainboard-P6/10

SCHEMATIC DIAGRAM
10
8200Q
8200Q-Mainboard-P7/10

SCHEMATIC DIAGRAM
11
8200Q
8200Q-Mainboard-P8/10

SCHEMATIC DIAGRAM
12
8200Q
8200Q-Mainboard-P9/10

SCHEMATIC DIAGRAM
13
8200Q
8200Q-Mainboard-P10/10

SCHEMATIC DIAGRAM
14
8200Q
8200Q-IR Receiver-P1/1

SCHEMATIC DIAGRAM
15
8200Q
8200Q- Trigger Out Board-P1/112V
470
CON3

WIRING DIAGRAM
16
8200Q
8200Q-Wiring Diagram-P1/1

17
SILK TOPSCREEN OF BOTTOM
/
8200Q
8200Q-MainBoard-Top Silkscreeen-P1/2