Audiolab 8000X7 User manual

audiolab
International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU
The 8000X7 is a genuine one-box, seven
channel power amplifier, capable of handling
even difficult loudspeaker loads.
The 8000X7 home theatre power amplifier
delivers 7 x 100Wrms power. However, you
can also run it in five or six channel mode too.
By bridging two channels it is possible to
create a more powerful single channel -
especially useful if your front left and front
right speakers are more performance critical
than the other speakers in your 5.1 system.
Power output
IHF toneburst power
Input for rated power
Input impedance
Gain
Signal to noise
Frequency Response
Input connector
7 x 100W into rated load impedance (8 Ohm)
5 x 100W and 1 x 150W (8 Ohm)
3 x 100W and 2 x 150W (8 Ohm)
7 x 120W (8 Ohm)
1.05 Vrms
47 kOhm
+29 dB at 1 kHz
better than 90 dB (relative to 0 dBW) unweighted
1.5 Hz - 150 kHz (-3 dB)
RCA
Specification
8000X7
Power Amplifier
“Unobtrusive, with an elegant
simplicity, the 8000X7 is a
compact yet powerful performer.”